Saturation and shadowing in high-energy proton-nucleus dilepton production

We discuss the inclusive dilepton cross section for proton (quark)-nucleus collisions at high energies in the very forward rapidity region. Starting from the calculation in the quasi-classical approximation, we include low-x evolution effects in the nucleus and predict leading twist shadowing together with anomalous scaling behaviour.Comment: 32 pages, LaTex, 6 figures, a few modifications of the tex

Ignition and combustion characteristics of metallized propellants

During this reporting period, theoretical work on the secondary atomization process was continued and the experimental apparatus was improved. A one-dimensional model of a rocket combustor, incorporating multiple droplet size classes, slurry combustion, secondary atomization, radiation heat transfer, and two-phase slip between slurry droplets and the gas flow was derived and a computer code was written to implement this model. The STANJAN chemical equilibrium solver was coupled with this code to yield gas temperature, density, and composition as functions of axial location. Preliminary results indicate that the model is performing correctly, given current model assumptions. Radiation heat transfer in the combustion chamber is treated as an optically-thick participating media problem requiring a solution of the radiative transfer equation. A cylindrical P sub 1 approximation was employed to yield an analytical expression for chamber-wall heat flux at each axial location. The code exercised to determine the effects of secondary atomization intensity, defined as the number of secondary drops produced per initial drop, on chamber burnout distance and final Al2O3 agglomerate diameter. These results indicate that only weak secondary atomization is required to significantly reduce these two parameters. Stronger atomization intensities were found to yield decreasing marginal benefits. The experimental apparatus was improved to reduce building vibration effects on the optical system alignment. This was accomplished by mounting the burner and the transmitting/receiving optics on a single frame supported by vibration-isolation legs. Calibration and shakedown tests indicate that vibration problems were eliminated and that the system is performing correctly

Ignition and combustion characteristics of metallized propellants

Experimental and analytical investigations focusing on secondary atomization and ignition characteristics of aluminum/liquid hydrocarbon slurry propellants were conducted. Experimental efforts included the application of a laser-based, two-color, forward-scatter technique to simultaneously measure free-flying slurry droplet diameters and velocities for droplet diameters in the range of 10-200 microns. A multi-diffusion flame burner was used to create a high-temperature environment into which a dilute stream of slurry droplets could be introduced. Narrowband measurements of radiant emission were used to determine if ignition of the aluminum in the slurry droplet had occurred. Models of slurry droplet shell formation were applied to aluminum/liquid hydrocarbon propellants and used to ascertain the effects of solids loading and ultimate particle size on the minimum droplet diameter that will permit secondary atomization. For a 60 weight-percent Al slurry, the limiting critical diameter was predicted to be 34.7 microns which is somewhat greater than the 20-25 micron limiting diameters determined in the experiments. A previously developed model of aluminum ignition in a slurry droplet was applied to the present experiments and found to predict ignition times in reasonable agreement with experimental measurements. A model was also developed that predicts the mechanical stress in the droplet shell and a parametric study was conducted. A one-dimensional model of a slurry-fueled rocket combustion chamber was developed. This model includes the processes of liquid hydrocarbon burnout, secondary atomization, aluminum ignition, and aluminum combustion. Also included is a model for radiant heat transfer from the hot aluminum oxide particles to the chamber walls. Exercising this model shows that only a modest amount of secondary atomization is required to reduce residence times for aluminum burnout, and thereby maintain relatively short chamber lengths. The model also predicts radiant heat transfer losses to the walls to be only approximately 3 percent of the fuel energy supplied. Additional work is required to determine the effects of secondary atomization on two-phase losses in the nozzle

Ignition and combustion characteristics of metallized propellants

Over the past six months, experimental investigations were continued and theoretical work on the secondary atomization process was begun. Final shakedown of the sizing/velocity measuring system was completed and the aluminum combustion detection system was modified and tested. Atomizer operation was improved to allow steady state operation over long periods of time for several slurries. To validate the theoretical modeling, work involving carbon slurry atomization and combustion was begun and qualitative observations were made. Simultaneous measurements of aluminum slurry droplet size distributions and detection of burning aluminum particles were performed at several axial locations above the burner. The principle theoretical effort was the application of a rigid shell formation model to aluminum slurries and an investigation of the effects of various parameters on the shell formation process. This shell formation model was extended to include the process leading up to droplet disruption, and previously developed analytical models were applied to yield theoretical aluminum agglomerate ignition and combustion times. The several theoretical times were compared with the experimental results

Does parton saturation at high density explain hadron multiplicities at LHC?

An addendum to our previous papers in Phys. Lett. B539 (2002) 46 and Phys. Lett. B502 (2001) 51, contributed to the CERN meeting "First data from the LHC heavy ion run", March 4, 2011Comment: 6 pages, contribution to the CERN meeting "First data from the LHC heavy ion run", March 4, 201

Solar Orbiter: Exploring the Sun-heliosphere connection

The heliosphere represents a uniquely accessible domain of space, where fundamental physical processes common to solar, astrophysical and laboratory plasmas can be studied under conditions impossible to reproduce on Earth and unfeasible to observe from astronomical distances. Solar Orbiter, the first mission of ESA's Cosmic Vision 2015-2025 programme, will address the central question of heliophysics: How does the Sun create and control the heliosphere? In this paper, we present the scientific goals of the mission and provide an overview of the mission implementation.Comment: 52 pages, 21 figures, 125 references; accepted for publication in Solar Physic

Remote profiling of lake ice using an S-band short pulse radar aboard an all-terrain vehicle

An airborne short-pulse radar system to measure ice thickness was designed. The system supported an effort to develop an all-weather Great Lakes Ice Information System to aid in extending the winter navigation season. Experimental studies into the accuracy and limitations of the system are described. A low power version was operated from an all-terrain vehicle on the Straits of Mackinac during March 1975. The vehicle allowed rapid surveying of large areas and eliminated the ambiguity in location between the radar system and the ground truth ice auger team. It was also possible to the effects of snow cover, surface melt water, pressure ridging, and ice type upon the accuracy of the system. Over 25 sites were explored which had ice thicknesses from 29 to 60 cm. The maximum radar overestimate was 9.8 percent, while the maximum underestimate was 6.6 percent. The average error of the 25 measurements was 0.1 percent

Measurement of lake ice thickness with a short-pulse radar system

Measurements of lake ice thickness were made during March 1975 at the Straits of Mackinac by using a short-pulse radar system aboard an all-terrain vehicle. These measurements were compared with ice thicknesses determined with an auger. Over 25 sites were explored which had ice thicknesses in the range 29 to 60 cm. The maximum difference between radar and auger measurements was less than 9.8 percent. The magnitude of the error was less than + or - 3.5 cm. The NASA operating short-pulse radar system used in monitoring lake ice thickness from an aircraft is also described

Quenching of hadron spectra in media

We determine how the yield of large transverse momentum hadrons is modified due to induced gluon radiation off a hard parton traversing a QCD medium. The quenching factor is formally a collinear- and infrared-safe quantity and can be treated perturbatively. In spite of that, in the $p_\perp$ region of practical interest, its value turns out to be extremely sensitive to large distances and can be used to unravel the properties of dense quark-gluon final states produced in heavy ion collisions. We also find that the standard modelling of quenching by shifting $p_\perp$ in the hard parton cross section by the mean energy loss is inadequate.Comment: 20 pp, 5 eps figure