85,420 research outputs found
The Angular Separation of the Components of the Cepheid AW Per
The 6.4 day classical Cepheid AW Per is a spectroscopic binary with a period
of 40 years. Analyzing the centroids of HST/STIS spectra obtained in November
2001, we have determined the angular separation of the binary system. Although
we currently have spatially resolved data for a single epoch in the orbit, the
success of our approach opens the possibility of determining the inclination,
sini, for the system if the measurements are repeated at additional epochs.
Since the system is potentially a double lined spectroscopic binary, the
combination of spectroscopic orbits for both components and the visual orbit
would give the distance to the system and the masses of its components, thereby
providing a direct measurement of a Cepheid mass.Comment: 12 pages, accepted version -- minor change
Small Power Systems Solar Electric Workshop Proceedings. Volume 1: Executive report. Volume 2: Invited papers
The background, objectives and methodology used for the Small Power Systems Solar Electric Workshop are described, and a summary of the results and conclusions developed at the workshop regarding small solar thermal electric power systems is presented
Potential of multisensor data and strategies for data acquisition and analysis
Registration and simultaneous analysis of multisensor images is useful because the multiple data sets can be compressed through image processing techniques to facilitate interpretation. This also allows integration of other spatial data sets. Techniques being developed to analyze multisensor images involve comparison of image data with a library of attributes based on physical properties measured by each sensor. This results in the ability to characterize geologic units based on their similarity to the library attributes, as well as discriminate among them. Several studies can provide information on ways to optimize multisensor remote sensing. Continued analyses of the Death Valley and San Rafael Swell data sets can provide insight into tradeoffs in spectral and spatial resolutions of the various sensors used to obtain the coregistered data sets. These include imagery from LANDSAT, SEASAT, HCMM, SIR-A, 11-channel VIS-NIR, thermal inertia images, and aircraft L- and X-band radar
Manufacture of astroloy turbine disk shapes by hot isostatic pressing, volume 1
The Materials in Advanced Turbine Engines project was conducted to demonstrate container technology and establish manufacturing procedures for fabricating direct Hot Isostatic Pressing (HIP) of low carbon Astroloy to ultrasonic disk shapes. The HIP processing procedures including powder manufacture and handling, container design and fabrication, and HIP consolidation techniques were established by manufacturing five HIP disks. Based upon dimensional analysis of the first three disks, container technology was refined by modifying container tooling which resulted in closer conformity of the HIP surfaces to the sonic shape. The microstructure, chemistry and mechanical properties of two HIP low carbon Astroloy disks were characterized. One disk was subjected to a ground base experimental engine test, and the results of HIP low carbon Astroloy were analyzed and compared to conventionally forged Waspaloy. The mechanical properties of direct HIP low carbon Astroloy exceeded all property goals and the objectives of reduction in material input weight and reduction in cost were achieved
Hot isostatically pressed manufacture of high strength MERL 76 disk and seal shapes
The feasibility of using MERL 76, an advanced high strength direct hot isostatic pressed powder metallurgy superalloy, as a full scale component in a high technology, long life, commercial turbine engine were demonstrated. The component was a JT9D first stage turbine disk. The JT9D disk rim temperature capability was increased by at least 22 C and the weight of JT9D high pressure turbine rotating components was reduced by at least 35 pounds by replacement of forged Superwaspaloy components with hot isostatic pressed (HIP) MERL 76 components. The process control plan and acceptance criteria for manufacture of MERL 76 HIP consolidated components were generated. Disk components were manufactured for spin/burst rig test, experimental engine tests, and design data generation, which established lower design properties including tensile, stress-rupture, 0.2% creep and notched (Kt = 2.5) low cycle fatigue properties, Sonntag, fatigue crack propagation, and low cycle fatigue crack threshold data. Direct HIP MERL 76, when compared to conventionally forged Superwaspaloy, is demonstrated to be superior in mechanical properties, increased rim temperature capability, reduced component weight, and reduced material cost by at least 30% based on 1980 costs
Criticality and Condensation in a Non-Conserving Zero Range Process
The Zero-Range Process, in which particles hop between sites on a lattice
under conserving dynamics, is a prototypical model for studying real-space
condensation. Within this model the system is critical only at the transition
point. Here we consider a non-conserving Zero-Range Process which is shown to
exhibit generic critical phases which exist in a range of creation and
annihilation parameters. The model also exhibits phases characterised by
mesocondensates each of which contains a subextensive number of particles. A
detailed phase diagram, delineating the various phases, is derived.Comment: 15 pages, 4 figure, published versi
Slow Coarsening in a Class of Driven Systems
The coarsening process in a class of driven systems is studied. These systems
have previously been shown to exhibit phase separation and slow coarsening in
one dimension. We consider generalizations of this class of models to higher
dimensions. In particular we study a system of three types of particles that
diffuse under local conserving dynamics in two dimensions. Arguments and
numerical studies are presented indicating that the coarsening process in any
number of dimensions is logarithmically slow in time. A key feature of this
behavior is that the interfaces separating the various growing domains are
smooth (well approximated by a Fermi function). This implies that the
coarsening mechanism in one dimension is readily extendible to higher
dimensions.Comment: submitted to EPJB, 13 page
Product Measure Steady States of Generalized Zero Range Processes
We establish necessary and sufficient conditions for the existence of
factorizable steady states of the Generalized Zero Range Process. This process
allows transitions from a site to a site involving multiple particles
with rates depending on the content of the site , the direction of
movement, and the number of particles moving. We also show the sufficiency of a
similar condition for the continuous time Mass Transport Process, where the
mass at each site and the amount transferred in each transition are continuous
variables; we conjecture that this is also a necessary condition.Comment: 9 pages, LaTeX with IOP style files. v2 has minor corrections; v3 has
been rewritten for greater clarit
- …