188,374 research outputs found
Calculation of material properties and ray tracing in transformation media
Complex and interesting electromagnetic behavior can be found in spaces with
non-flat topology. When considering the properties of an electromagnetic medium
under an arbitrary coordinate transformation an alternative interpretation
presents itself. The transformed material property tensors may be interpreted
as a different set of material properties in a flat, Cartesian space. We
describe the calculation of these material properties for coordinate
transformations that describe spaces with spherical or cylindrical holes in
them. The resulting material properties can then implement invisibility cloaks
in flat space. We also describe a method for performing geometric ray tracing
in these materials which are both inhomogeneous and anisotropic in their
electric permittivity and magnetic permeability
Cardiotachometer with linear beat-to-beat frequency response
Cardiotachometer detects and displays the human heart rate during physiological studies. It provides linear response to the heart rate, records heart rate during rest and under heavy stress, provides a beat-to-beat indication of changes in heart rate, and is relatively free of interfering signals from activities other than the heart rate
CFD Mixing Analysis of Jets Injected from Straight and Slanted Slots into Confined Crossflow in Rectangular Ducts
A CFD study was performed to analyze the mixing potential of opposed rows of staggered jets injected into confined crossflow in a rectangular duct. Three jet configurations were numerically tested: (1) straight (0 deg) slots; (2) perpendicular slanted (45 deg) slots angled in opposite directions on top and bottom walls; and (3) parallel slanted (45 deg) slots angled in the same direction on top and bottom walls. All three configurations were tested at slot spacing-to-duct height ratios (S/H) of 0.5, 0.75, and 1.0; a jet-to-mainstream momentum flux ratio (J) of 100; and a jet-to-mainstream mass flow ratio of 0.383. Each configuration had its best mixing performance at S/H of 0.75. Asymmetric flow patterns were expected and predicted for all slanted slot configurations. The parallel slanted slot configuration was the best overall configuration at x/H of 1.0 for S/H of 0.75
A system architecture for a planetary rover
Each planetary mission requires a complex space vehicle which integrates several functions to accomplish the mission and science objectives. A Mars Rover is one of these vehicles, and extends the normal spacecraft functionality with two additional functions: surface mobility and sample acquisition. All functions are assembled into a hierarchical and structured format to understand the complexities of interactions between functions during different mission times. It can graphically show data flow between functions, and most importantly, the necessary control flow to avoid unambiguous results. Diagrams are presented organizing the functions into a structured, block format where each block represents a major function at the system level. As such, there are six blocks representing telecomm, power, thermal, science, mobility and sampling under a supervisory block called Data Management/Executive. Each block is a simple collection of state machines arranged into a hierarchical order very close to the NASREM model for Telerobotics. Each layer within a block represents a level of control for a set of state machines that do the three primary interface functions: command, telemetry, and fault protection. This latter function is expanded to include automatic reactions to the environment as well as internal faults. Lastly, diagrams are presented that trace the system operations involved in moving from site to site after site selection. The diagrams clearly illustrate both the data and control flows. They also illustrate inter-block data transfers and a hierarchical approach to fault protection. This systems architecture can be used to determine functional requirements, interface specifications and be used as a mechanism for grouping subsystems (i.e., collecting groups of machines, or blocks consistent with good and testable implementations)
Analytical study of catalytic reactors for hydrazine decomposition. One and two dimensional steady-state programs, computer programs manual
Programs manual for one-dimensional and two- dimensional steady state models of catalyzed hydrazine decomposition reaction chamber
Optimized bolted joint
A method is disclosed for joining segments of the skin of an aircraft. The ends of the skin are positioned in close proximity or abutt each other. The skin is of constant thickness throughout the joint and is sandwiched between splice plates, which taper in thickness from the last to the first bolt rows in order to reduce the stiffness of the splice plate and thereby reduce the load transfer at the location where bypass loads are the highest
CFD mixing analysis of axially opposed rows of jets injected into confined crossflow
A computational fluid dynamics (CFD) parametric study was performed to analyze axially opposed rows of jets mixing with crossflow in a rectangular duct. Isothermal analysis was conducted to determine the influence of lateral geometric arrangement on mixing. Two lateral arrangements were analyzed: (1) inline (jets' centerlines aligned with each other on top and bottom walls), and (2) staggered (jets' centerlines offset with each other on top and bottom walls). For a jet-to-mainstream mass flow ratio (MR) of 2.0, design parameters were systematically varied for jet-to-mainstream momentum-flux ratios (J) between 16 and 64 and orifice spacing-to-duct height ratios (S/H) between 0.125 and 1.5. Comparisons were made between geometries optimized for S/H at a specified J. Inline configurations had a unique spacing for best mixing at a specified J. In contrast, staggered configurations had two 'good mixing' spacings for each J, one corresponding to optimum inline spacing and the other corresponding to optimum non-impinging jet spacing. The inline configurations, due to their smaller orifice size at optimum S/H, produced better initial mixing characteristics. At downstream locations (e.g. x/H of 1.5), the optimum non-impinging staggered configuration produced better mixing than the optimum inline configuration for J of 64; the opposite results were observed for J of 16. Increasing J resulted in better mixing characteristics if each configuration was optimized with respect to orifice spacing. Mixing performance was shown to be similar to results from previous dilution jet mixing investigations (MR less than 0.5)
The distribution of local star formation activity as a function of galaxy stellar mass, environment and morphology
This article has been accepted for publication in Monthly Notices of the Royal Astronomical Society © 2017 The Author(s). Published by Oxford University Press on behalf of the Royal Astronomical Society. All rights reserved.We present a detailed inventory of star formation in the local Universe, dissecting the cosmic star formation budget as a function of key variables that influence the star formation rate (SFR) of galaxies: stellar mass, local environment and morphology. We use a large homogeneous dataset from the SDSS to first study how the star-formation budget in galaxies with stellar masses greater than log(M/MSun) = 10 splits as a function of each parameter separately. We then explore how the budget behaves as a simultaneous function of these three parameters. We show that the bulk of the star formation at z < 0.075 (~65 per cent) takes place in spiral galaxies, that reside in the field, and have stellar masses between 10 < log(M/MSun) < 10.9. The ratio of the cosmic star formation budget hosted by galaxies in the field, groups and clusters is 21:3:1. Morphological ellipticals are minority contributors to local star formation. They make a measurable contribution to the star formation budget only at intermediate to high stellar masses, 10.3 < log(M/MSun) < 11.2 (where they begin to dominate by number), and typically in the field, where they contribute up to ~13 per cent of the total star-formation budget. This inventory of local star formation serves as a z~0 baseline which, when combined with similar work at high redshift, will enable us to understand the changes in SFR that have occurred over cosmic time and offers a strong constraint on models of galaxy formation.Peer reviewe
Ice core records of atmospheric CO2 around the last three glacial terminations
Air trapped in bubbles in polar ice cores constitutes an archive for the reconstruction of the global carbon cycle and the relation between greenhouse gases and climate in the past. High-resolution records from Antarctic ice cores show that carbon dioxide concentrations increased by 80 to 100 parts per million by volume 600 ± 400 years after the warming of the last three deglaciations. Despite strongly decreasing temperatures, high carbon dioxide concentrations can be sustained for thousands of years during glaciations; the size of this phase lag is probably connected to the duration of the preceding warm period, which controls the change in land ice coverage and the buildup of the terrestrial biosphere.</jats:p
Macromolecular separation through a porous surface
A new technique for the separation of macromolecules is proposed and
investigated. A thin mesh with pores comparable to the radius of gyration of a
free chain is used to filter chains according to their length. Without a field
it has previously been shown that the permeability decays as a power law with
chain length. However by applying particular configurations of pulsed fields,
it is possible to have a permeability that decays as an exponential. This
faster decay gives much higher resolution of separation. We also propose a
modified screen containing an array of holes with barb-like protrusions running
parallel to the surface. When static friction is present between the
macromolecule and the protrusion, some of the chains get trapped for long
durations of time. By using this and a periodic modulation of an applied
electric field, high resolution can be attained.Comment: 18 pages latex, 6 postscript figures, using psfi
- …