367 research outputs found
Carbon Monoxide Intensity Mapping at Moderate Redshifts
We present a study of the feasibility of an intensity-mapping survey
targeting the 115 GHz CO(1-0) rotational transition at . We consider
four possible models and estimate the spatial and angular power spectra of CO
fluctuations predicted by each of them. The frequency bandwidths of most
proposed CO intensity mapping spectrographs are too small to use the Limber
approximation to calculate the angular power spectrum, so we present an
alternative method for calculating the angular power spectrum. The models we
consider span two orders of magnitude in signal amplitude, so there is a
significant amount of uncertainty in the theoretical predictions of this
signal. We then consider a parameterized set of hypothetical spectrographs
designed to measure this power spectrum and predict the signal-to-noise ratios
expected under these models. With the spectrographs we consider we find that
three of the four models give an SNR greater than 10 within one year of
observation. We also study the effects on SNR of varying the parameters of the
survey in order to demonstrate the importance of carefully considering survey
parameters when planning such an experiment.Comment: 7 pages, 8 fgures, published in MNRA
Recommendation of RILEM TC 212-ACD: acousticemission and related NDE techniques for crack detectionand damage evaluation in concrete. Measurement method for acoustic emission signals in concrete
The text presented hereafter is a draft for general consideration
Evaluation of concrete structures by combining non-destructive testing methods (SENSO project)
The management and maintenance of the built heritage is one of the main interests of the owners of concrete structures. The engineers wish to obtain quantitative information about concrete properties and their variability. Non-destructive testing (NDT) is very popular in this context as it quickly provides relevant information on the integrity and evolution of the material, but several kinds of indicators representative of the concrete condition need to be evaluated. A French Project, named SENSO, aims to develop methods for the non-destructive evaluation of concrete based on a multi-techniques approach. Several families of techniques are concerned (ultrasonic, electromagnetic, electrical, etc.). The main objective is to define the sensitivity of the techniques and the variability of the evaluation for each indicator concerned. To achieve this, a large experimental programme, involving a representative range of concretes and several indicators, has been carried out. A large database, linking the NDT observables and the indicators, allows the different observables to be distinguished in terms of quality (linked to the variability) and in terms of relevance for the characterisation of each indicator. The improvement of the indicator evaluation by means of technique combinatio
Recommendation of RILEM TC 212-ACD: acousticemission and related NDE techniques for crack detectionand damage evaluation in concrete.Test method for damage qualification of reinforced concrete beams by acousticemission
The text presented hereafter is a draft for general consideration
Differences in estimates of size distribution of beryllium powder materials using phase contrast microscopy, scanning electron microscopy, and liquid suspension counter techniques
Accurate characterization of the physicochemical properties of aerosols generated for inhalation toxicology studies is essential for obtaining meaningful results. Great emphasis must also be placed on characterizing particle properties of materials as administered in inhalation studies. Thus, research is needed to identify a suite of techniques capable of characterizing the multiple particle properties (i.e., size, mass, surface area, number) of a material that may influence toxicity. The purpose of this study was to characterize the morphology and investigate the size distribution of a model toxicant, beryllium. Beryllium metal, oxides, and alloy particles were aerodynamically size-separated using an aerosol cyclone, imaged dry using scanning electron microscopy (SEM), then characterized using phase contrast microscopy (PCM), a liquid suspension particle counter (LPC), and computer-controlled SEM (CCSEM). Beryllium metal powder was compact with smaller sub-micrometer size particles attached to the surface of larger particles, whereas the beryllium oxides and alloy particles were clusters of primary particles. As expected, the geometric mean (GM) diameter of metal powder determined using PCM decreased with aerodynamic size, but when suspended in liquid for LPC or CCSEM analysis, the GM diameter decreased by a factor of two (p < 0.001). This observation suggested that the smaller submicrometer size particles attached to the surface of larger particles and/or particle agglomerates detach in liquid, thereby shifting the particle size distribution downward. The GM diameters of the oxide materials were similar regardless of sizing technique, but observed differences were generally significant (p < 0.001). For oxides, aerodynamic cluster size will dictate deposition in the lung, but primary particle size may influence biological activity. The GM diameter of alloy particles determined using PCM became smaller with decreasing aerodynamic size fraction; however, when suspended in liquid for CCSEM and LPC analyses, GM particle size decreased by a factor of two (p < 0.001) suggesting that alloy particles detach in liquid. Detachment of particles in liquid could have significance for the expected versus actual size (and number) distribution of aerosol delivered to an exposure subject. Thus, a suite of complimentary analytical techniques may be necessary for estimating size distribution. Consideration should be given to thoroughly understanding the influence of any liquid vehicle which may alter the expected aerosol size distribution
- âŠ