The analysis of European lacquer : optimization of thermochemolysis temperature of natural resins

In order to optimize chromatographic analysis of European lacquer, thermochemolysis temperature was evaluated for the analysis of natural resins. Five main ingredients of lacquer were studied: sandarac, mastic, colophony, Manila copal and Congo copal. For each, five temperature programs were tested: four fixed temperatures (350, 480, 550, 650 degrees C) and one ultrafast thermal desorption (UFD), in which the temperature rises from 350 to 660 degrees C in 1 min. In total, the integrated signals of 27 molecules, partially characterizing the five resins, were monitored to compare the different methods. A compromise between detection of compounds released at low temperatures and compounds formed at high temperatures was searched. 650 degrees C is too high for both groups, 350 degrees C is best for the first, and 550 degrees C for the second. Fixed temperatures of 480 degrees C or UFD proved to be a consensus in order to detect most marker molecules. UFD was slightly better for the molecules released at low temperatures, while 480 degrees C showed best compounds formed at high temperatures

Packed hybrid silica nanoparticles as sorbents with thermo-switchable surface chemistry and pore size for fast extraction of environmental pollutants

Thermoresponsive poly(N-isopropylacrylamide)-grafted silica nanoparticles (SiNPs) have been synthesized and fully characterized by ATR-FTIR, TGA, HRTEM, BET and DLS analysis. Hybrid solid phase extraction (SPE) beds with tuneable pore size and switchable surface chemistry were prepared by packing the polymergrafted nanoparticles inside SPE cartridges. The cartridges were tested by checking the thermoregulated elution of model compounds, namely methylene blue, caffeine and amoxicillin. Extraction of the analytes and regeneration of the interaction sites on the sorbent surface was carried out entirely in water solution by changing the external temperature below and above the lower critical solution temperature (LCST) of the polymer. The results demonstrate that the elution of model compounds depends on the temperature-regulated size of the inter-particle voids and on the change of surface properties of the PNIPAM-grafted nanoparticles from hydrophilic to hydrophobic

Advancing preservation: a chemometric approach for monitoring the degradation of protective coatings for bronze statues

Bronze outdoor statues are often covered by a corrosion patina that forms due to environmental exposure, providing both aesthetic value and, partly, a surface passivation. However, this patina does not prevent from decay by external factors such as pollution, UV radiation, and humidity. To mitigate these decay processes, protective coatings are commonly used, but existing solutions often have drawbacks related to health, durability, and the need for frequent reapplication. The development of reliable, long-term conservation methods is essential. This work focuses on evaluating coatings formulated with Paraloid (R) B44, incorporating non-toxic corrosion inhibitors and light stabilizers. A total of twenty-one coatings were subjected to accelerated aging with artificial sunlight, and their decay was monitored using a multi-analytical approach involving Fourier Transform Infrared Spectroscopy (FT-IR) and UV-Vis spectroscopy, both with benchtop and portable spectrometers. The aim is to propose a method that combines spectroscopic data with chemometrics, specifically Principal Component Analysis (PCA), to objectively assess coating decay over time. The results demonstrate that PCA provides a simple yet powerful tool to distinguish between different formulations, track their aging, and rationalize decay processes. This approach not only facilitates the comparative analysis of coatings but also holds potential for field applications using portable instruments. By integrating spectroscopy with chemometrics, this method aligns with the principles of green analytical chemistry, offering a non-invasive, efficient means to monitor the effectiveness of protective coatings for cultural heritage preservation

Improvement in the sustainability and stability of acrylic protective coatings for outdoor bronze artworks

Outdoor bronze artworks are an entrenched part of our urban landscape. They are usually covered by a patina resulting from their exposition to the environment. This patina plays an important aesthetic role and may provide some passivation on the surface, nonetheless it does not prevent the degradation processes promoted by external factors such as pollution, light and humidity. One of the strategies to slow down these unwanted processes is the application of protective coatings. The products currently available have some limitations due to the loss of effectiveness over time and poor environmental sustainability. With the aim of proposing more performing alternatives, coatings based on Paraloid (R) B44 modified with corrosion inhibitors and light stabilizers were prepared and characterized. Two non-toxic corrosion inhibitors were studied, 5-mercapto-1-pheniltetrazole (MPT) and 5-ethyl-1,3,4-thiadiazol-2-amine (AEDTA), comparing them with the traditional benzotriazole (BTA). The approach used aimed to identify the blend providing the most stable coatings. The chemical and physical properties of the coatings, such as colour, solubility, glass transition and composition, were studied and monitored over time. All coatings have shown adequate visual properties; however, corrosion inhibitors degrade some other properties of the coatings and need to be used in conjunction with light stabilizers. The permanence of corrosion inhibitors in the coatings over time was also studied by investigating the role of the support. The establishment of specific interactions between inhibitors and the bronze surface lengthens their permanence in the coatings compared to what happens with inert supports. Especially for AEDTA, the inhibitor retention within the coating and at the coating-bronze interface is better than for BTA and MPT. The effect of each of the additives on the photooxidation stability of the coating was evaluated and the most promising inhibitor and stabilizer combination was identified