Process for purification of solids

A process for purifying solids, especially silicon, by melting and subsequent resolidification, is described. Silicon used in solar cell manufacturing is processed more efficiently and cost effectively

Dynamic and Static Transmission Electron Microscopy Studies on Structural Evaluation of Au nano islands on Si (100) Surface

Transmission electron microscopy (TEM) study on morphological changes in gold nanostructures deposited on Si (100) upon annealing under different vacuum conditions has been reported. Au thin films of thickness ~2.0 nm were deposited under high vacuum condition (with the native oxide at the interface of Au and Si) using thermal evaporation. In-situ, high temperature (from room temperature (RT) to 850\degreeC) real time TEM measurements showed the evaluation of gold nanoparticles into rectangular/square shaped gold silicide structures. This has been attributed to selective thermal decomposition of native oxide layer. Ex-situ annealing in low vacuum (10-2 mbar) at 850\degreeC showed no growth of nano-gold silicide structures. Under low vacuum annealing conditions, the creation of oxide could be dominating compared to the decomposition of oxide layers resulting in the formation of barrier layer between Au and Si.Comment: 15 pages, 4 figure

First look analysis of geologic ground patterns on ERTS-1 imagery of Missouri

Examination of ERTS-1 data for selected areas of Missouri revealed not only many of the known geologic features but also a number of unknown linear, circular and arcuate ground patterns. The number of new geologic elements that have been brought to light as well as the sharp definition and probable extensions of several known geologic features point out the importance of multispectral imagery via satellite and the synoptic views which they provide. To date, analysis and interpretations have been a first-look visual examination of the unenhanced projected images

Summary of an integrated ERTS-1 project and its results at the Missouri Geological Survey

Use of the ERTS imagery involved the recognition and interpretation of various ground patterns. Analysis and application are tied to ongoing programs. Specific studies utilizing the imagery and NASA aircraft photography are: a statewide lake and dam inventory; assessment of flooding and floodprone areas along the Missouri portion of the Mississippi and Missouri Rivers; land-use classification for several counties; structural features in selected areas; and Pleistocene features in northern Missouri. Though it has been suggested that repetitive coverage is not necessary for geologic studies, it is this specific feature along with the synoptic view of large portions of the State that provided the potential for the utilization of the ERTS imagery in Missouri. Other State agencies, Departments of Conservation, Agriculture, and Community Affairs, have expressed interest in the potential application of ERTS data in their respective fields

Development of Natural Rubber-Fibrous Nano Clay Attapulgite Composites: The Effect of Chemical Treatment of Filler on Mechanical and Dynamic Mechanical Properties of Composites

AbstractCommon nano clay fillers have layered structure. Some nano clays like Attapulgite (AT), Sepiolite have rod like fibrous structure. Compared to layered structured clay fibrous clay AT can undergo better dispersion in polymer matrix leading to better improvement in composite properties. Chemical modifications of AT are done through amine treatment as well as by amine+silane treatment to get chemically modified fillers AAT and SAT respectively. In the present investigation, nano composites are prepared using natural rubber (NR) filled with AT, AAT and SAT. Three different loadings of each filler are used namely 2.5, 5, and 10 phr (parts per hundred of rubber). Mechanical properties like tensile strength, elongation at break increase with the increase in filler loading up to 5 phr there after these properties marginally fall when loading is increased to 10 phr due to problem of filler dispersion at higher loading. However, modulus at 300% elongation and tear strength increases with the increase in filler loading up to 10 phr. Very similar trend can also be observed for composites with chemically modified fillers, AAT and SAT. But the degree of reinforcement is higher in the case of AAT and SAT compared to that of unmodified filler AT for the same filler loading. This difference is mainly due to better polymer-filler interaction and filler dispersion in the case of chemically modified clays AAT and SAT compared to unmodified AT. Tear strength of composites increases remarkably with the addition of AT and which is further enhanced when chemically modified clays AAT and SAT are added. Dynamic-mechanical analyses of different clay composites give idea about the difference in the degree of polymer–filler interaction due to chemical treatment of filler

Urban markets and diversity: Toward a research agenda

In this paper we advocate the study of local street markets to explore fundamental issues about the relationship between economy and society. This relationship evolves over time and we believe that it has been recast in an age of increasing cultural diversity and neoliberal state regulatory structures. In street markets we can see how diversity and the nature of economic transactions become mutually constitutive. We argue that cultural diversity propels local markets, while everyday interactions in markets influence intercultural relationships. These complex processes are affected by the spatiality of markets and the regulatory environments within which they operate. We conclude by framing a research program on street markets and discuss a number of methodological complications that would need to be addressed in this endeavour