Veselago lensing in graphene with a p-n junction: classical versus quantum effects

The feasibility of Veselago lensing in graphene with a p-n junction is investigated numerically for realistic injection leads. Two different set-ups with two narrow leads are considered with absorbing or reflecting side edges. This allows us to separately determine the influence of scattering on electron focusing for the edges and the p-n interface. Both semiclassical and tight-binding simulations show a distinctive peak in the transmission probability that is attributed to the Veselago lensing effect. We investigate the robustness of this peak on the width of the injector, the position of the p-n interface and different gate potential profiles. Furthermore, the influence of scattering by both short- and long-range impurities is considered.Comment: 10 pages, 7 figure

GARNETS OF MICA-SCHISTS FROM CRNI VRH AND RESAVSKI HUMOVI (SERBIA)

Metamorphic rocks of the Crni Vrh and Resavski Humovi area belong to the north-northwestern part of the Serbo-Macedonian Composite Terrane and consist of different types of mica-schists, gneisses and amphibolites. Mica-schists are composed of biotite, muscovite, garnet, staurolite, kyanite, small quantity of Kfeldspar, acid plagioclase and quartz. Accessory minerals are apatite, zircon, tourmaline and ilmenite. Garnets in mica-schists from both localities occur as subhedral to anhedral porphyroblasts from 0.2 to 10mm in size. Most garnets are oriented parallel to the dominant foliation. Garnets from the Crni Vrh mica-schists contain more spesartine component than garnets from Resavski Humovi, while almandine component show opposite tendency. The difference between those garnets is clearly visible, as well as zonality expressed through the increase of almandine component from center to the grain rim. The spesartine component as mentioned above, shows the opposite tendency. Using different geothermometers and geobarometers it was found that mica-schists from Crni Vrh were formed at temperatures from 550-600°C and pressures from 6-6.2 kbar, while micaschists from Resavski Humovi developed at slightly lower temperatures (520-560°C) and at some higher pressures (7-7.3 kbar)

A multicarrier amplifier design linearized trough second harmonics and second-order IM feedback

A novel linearisation technique for reduction in the first and second kind of the third-order intermodulation products was applied in this paper. The second harmonics and second-order intermodulation products are led from the output to the input of a power amplifier through a feedback loop. The power amplifier including the feedback loop components (bandpass filter, phase shifter and attenuator) was designed as a hybrid microwave integrated circuit by using program ADS. The phase and amplitude of the loop signals are the adjustable parameters. Therefore, a voltage that controls a phase shift of the phase shifter and a control current of a PIN diode in the attenuator circuit were optimised to obtain a reduction in the third-order intermodulation distortion. For three fundamental signals at the power amplifier input, the lowest improvement of 13 dB for the first and 18 dB for the second kind of the third order intermodulation product levels was achieved

Linearization of multichannel amplifiers with the injection of second harmonics into the amplifier and predistortion circuit

A linearization technique that uses the injection of the fundamental signal second harmonics together with the fundamental signals at the amplifier input has been extended in this paper by introducing the injection the second harmonics into nonlinear microwave amplifier and so-called predistortion circuit. Predistortion circuit produces the third-order intermodulation signals that are injected at the amplifier input together with the second harmonics making the linearization procedure more independent on the phase variation of the second harmonics. In addition, a considerably better improvement is attained for the power of fundamental signals close to 1-dB compression point by applying the linearization technique proposed in this paper in comparison to the linearization with the injection of the second harmonics merely in the nonlinear amplifier

Three-body correlations and finite-size effects in the Moore--Read states on a sphere

Two- and three-body correlations in partially filled degenerate fermion shells are studied numerically for various interactions between the particles. Three distinct correlation regimes are defined, depending on the short-range behavior of the pair pseudopotential. For pseudopotentials similar to those of electrons in the first excited Landau level, correlations at half-filling have a simple three-body form consisting of the maximum avoidance of the triplet state with the smallest relative angular momentum R_3=3. In analogy to the superharmonic criterion for Laughlin two-body correlations, their occurrence is related to the form of the three-body pseudopotential at short range. The spectra of a model three-body repulsion are calculated, and the zero-energy Moore--Read ground state, its +-e/4-charged quasiparticles, and the magnetoroton and pair-breaking bands are all identified. The quasiparticles are correctly described by a composite fermion model appropriate for Halperin's p-type pairing with Laughlin correlations between the pairs. However, the Moore--Read ground state, and specially its excitations, have small overlaps with the corresponding Coulomb eigenstates when calculated on a sphere. The reason lies in surface curvature which affects the form of pair pseudopotential for which the "R_3>3" three-body correlations occur. In finite systems, such pseudopotential must be slightly superharmonic at short range (different from Coulomb pseudopotential). However, the connection with the three-body pseudopotential is less size-dependent, suggesting that the Moore--Read state and its excitations are a more accurate description for experimental nu=5/2 states than could be expected from previous calculations.Comment: 12 pages, 12 figures, submitted to PR

Low intermodulation amplifiers for RF and microwave wireless systems

A novel linearisation technique for reduction in the third-order intermodulation distortion products, with injection of second harmonics through a feedback loop of a power amplifier, was applied in this paper. The power amplifier including the feedback loop components (bandpass filter, phase shifter, attenuator) was designed as a hybrid microwave integrated circuit by using the program Libra. The adjustable parameters are the phase and amplitude of the loop signals. Therefore, a voltage that controls a phase shift of the phase shifter and a control current of a PIN diode in the attenuator circuit were optimised to obtain a reduction in the third-order intermodulation distortion. The achievable improvement was found to be 21 dB for the case of two fundamental signals at the power amplifier inpu

Coexistence of Composite-Bosons and Composite-Fermions in nu=1/2 + 1/2 Quantum Hall Bilayers

In bilayer quantum Hall systems at filling fractions near nu=1/2+1/2, as the spacing d between the layers is continuously decreased, intra-layer correlations must be replaced by inter-layer correlations, and the composite fermion (CF) Fermi seas at large d must eventually be replaced by a composite boson (CB) condensate or "111 state" at small d. We propose a scenario where CBs and CFs coexist in two interpenetrating fluids in the transition. Trial wavefunctions describing these mixed CB-CF states compare very favorably with exact diagonalization results. A Chern-Simons transport theory is constructed that is compatible with experiment.Comment: 4 pages, 2 figure

The thermal effect of internal exhaust gas recirculation on controlled auto ignition

Controlled Auto Ignition (CAI) uses compression heat to auto ignite a homogeneous air/fuel mixture. Using internal exhaust gas recirculation (IEGR) as an indirect control method, CAI offers superior fuel economy and pollutant emission reductions. Practically, this can readily be achieved by a method of early exhaust valve closure and late inlet valve opening to trap exhaust gas residuals within the cylinder from one cycle to the next. In order to understand the combustion mechanism, we did a comprehensive investigation on CAI fuelled with isooctane. Test data was gathered from a single cylinder research engine equipped with Lotus’ Research Active Valve Train (AVT) System, and the modelling study was based on detailed chemical kinetics. It was found that CAI can only occur when the thermal energy of the engine charge, which is a mixture of air / fuel and IEGR, reaches a certain level. This thermal energy is inherited from IEGR trapped inside the cylinder from the previous combustion cycle, when the air / fuel fresh charge was supplied at ambient conditions

Annealed disorder, rare regions, and local moments: A novel mechanism for metal-insulator transitions

Local magnetic moments in disordered sytems can be described in terms of annealed magnetic disorder, in addition to the underlying quenched disorder. It is shown that for noninteracting electron systems at zero temperature, the annealed disorder leads to a new mechanism, and a new universality class, for a metal-insulator transition. The transition is driven by a vanishing of the thermodynamic density susceptibility rather than by localization effects. The critical behavior near two-dimensions is determined, and the underlying physics is discussed.Comment: 4 pp., LaTeX, no figs., final version as publishe

Color measurement of animal source foods

Rapid and objective assessment of food color is necessary in quality control. The color evaluation of animal source foods using a computer vision system (CVS) and a traditional colorimeter is examined. With the same measurement conditions, color results deviated between these two approaches. The color returned by the CVS had a close resemblance to the perceived color of the animal source foods, whereas the colorimeter returned not typical colors. The effectiveness of the CVS is confirmed by the study results. Considering these data, it could be concluded that the colorimeter is not representative method for color analysis of animal source foods, therefore, the color read by the CVS seemed to be more similar to the real ones