583 research outputs found

    In Situ deposition of YBCO high-T(sub c) superconducting thin films by MOCVD and PE-MOCVD

    Get PDF
    Metalorganic Chemical Vapor Deposition (MOCVD) offers the advantages of a high degree of compositional control, adaptability for large scale production, and the potential for low temperature fabrication. The capability of operating at high oxygen partial pressure is particularly suitable for in situ formation of high temperature superconducting (HTSC) films. Yttrium barium copper oxide (YBCO) thin films having a sharp zero-resistance transition with T( sub c) greater than 90 K and Jc approx. 10 to the 4th power A on YSZ have been prepared, in situ, at a substrate temperature of about 800 C. Moreover, the ability to form oxide films at low temperature is very desirable for device applications of HTSC materials. Such a process would permit the deposition of high quality HTSC films with a smooth surface on a variety of substrates. Highly c-axis oriented, dense, scratch resistant, superconducting YBCO thin films with mirror-like surfaces have been prepared, in situ, at a reduced substrate temperature as low as 570 C by a remote microwave-plasma enhanced metalorganic chemical vapor deposition (PE-MOCVD) process. Nitrous oxide was used as a reactant gas to generate active oxidizing species. This process, for the first time, allows the formation of YBCO thin films with the orthorhombic superconducting phase in the as-deposited state. The as-deposited films grown by PE-MOCVD show attainment of zero resistance at 72 K with a transition width of about 5 K. MOCVD was carried out in a commercial production scale reactor with the capability of uniform deposition over 100 sq cm per growth run. Preliminary results indicate that PE-MOCVD is a very attractive thin film deposition process for superconducting device technology

    In-situ deposition of YBCO high-Tc superconducting thin films by MOCVD and PE-MOCVD

    Get PDF
    Metal-Organic Chemical Vapor Deposition (MOCVD) offers the advantages of a high degree of compositional control, adaptability for large scale production, and the potential for low temperature fabrication. The capability of operating at high oxygen partial pressure is particularly suitable for in situ formation of high temperature superconducting (HTSC) films. Yttrium barium copper oxide (YBCO) thin films having a sharp zero-resistance transition with T(sub c) greater than 90 K and J(sub c) of approximately 10(exp 4) A on YSZ have been prepared, in situ, at a substrate temperature of about 800 C. Moreover, the ability to form oxide films at low temperature is very desirable for device applications of HTSC materials. Such a process would permit the deposition of high quality HTSC films with a smooth surface on a variety of substrates. Highly c-axis oriented, dense, scratch resistant, superconducting YBCO thin films with mirror-like surfaces have been prepared, in situ, at a reduced substrate temperature as low as 570 C by a remote microwave-plasma enhanced metal-organic chemical vapor deposition (PE-MOCVD) process. Nitrous oxide was used as a reactant gas to generate active oxidizing species. This process, for the first time, allows the formation of YBCO thin films with the orthorhombic superconducting phase in the as-deposited state. The as-deposited films grown by PE-MOCVD show attainment of zero resistance at 72 K with a transition width of about 5 K. MOCVD was carried out in a commercial production scale reactor with the capability of uniform deposition over 100 sq cm per growth run. Preliminary results indicate that PE-MOCVD is a very attractive thin film deposition process for superconducting device technology

    The Association between women’s choice of birth setting and their use of CAM during labor and birth.

    Full text link
    Purpose: Contemporary maternity care often means women are able to choose a number of settings for their birth including hospitals, birth centers, and community settings. There is also evidence that many women utilised complementary and alternative medicine (CAM) during pregnancy and birth. The purpose of this study is to examine the association between women’s choice of birth setting and their use of CAM during labor and birth. Methods: Longitudinal data from a sub-study of women (n = 2445) from the nationally-representative Australian Longitudinal Study of Women’s Health (ALSWH) was analyzed for relationships between women’s birth setting (hospital, birth center, or community) and their demographics, attitudes towards maternity care (including CAM), and use of CAM during pregnancy and birth. Results: The characteristics associated with women’s choice of birth setting include some demographic features such as employment status, health care subsidy, and level of education. Women’s birth setting choice was also linked to a preference for CAM practitioner by women birthing in birth centers and community settings. In contrast, women birthing in hospitals held more positive views towards obstetric care. There was a higher use of CAM during pregnancy by women birthing in birth centers and community but this was not consistent across all CAMs investigated. Naturopaths, herbal medicines, homeopathy and flower essences were more commonly used by women birthing in community compared with those in a birth center. There was also a higher rate of CAM use for intrapartum pain management for women birthing outside of a hospital setting, although women attending a birth center were more likely than those birthing in community to use pharmacological pain management techniques. Conclusion: There are characteristic differences between women birthing in different birth settings which seems to be influenced as much by preference for maternity care and interest in CAM use as it is by demographics

    Effect of alpha tocopherol acetate in Walker 256/B cells-induced oxidative damage in a rat model of breast cancer skeletal metastases

    Get PDF
    The pathophysiological changes and the oxidative–antioxidative status were evaluated in the bone microenvironment of rat inoculated with Walker 256/B mammary gland carcinoma cells, and used α-tocopherol acetate (ATA) as a countermeasure.Walker 256/B cells were injected into the right femora of aged male rats. Animals were randomized into three groups: 12 rats were injected with saline (control group); 14 rats were injected with Walker 256/B cells (5 × 104) in the medullar cavity (W256 group); 14 rats were inoculated with Walker 256/B cells and treated with ATA (45 mg/kg BW) (W256 + ATA group). After 20 days, rats were euthanized and the femurs were radiographed. Micro architectural parameters were measured by microcomputed tomography and histology. Serum, bone and bone marrow were evaluated for oxidative damage. In parallel, cell cultures were done in the presence of ATA and ROS were measured by fluorescence; apoptotic cells were determined in parallel. W256 groups had osteolytic damages with marked resorption of cortical and trabecular bone. W256 + ATA animals presented marked osteosclerotic areas associated with tumor necrosis areas inside the bone cavity. Levels of lipid peroxidation and protein oxidation were found to increase in W256 rats; a significant reduction in SOD and GSH-p activities was also observed. W256 + ATA group had significantly reduced oxidative damage, but not reversed back to the control levels. The present study shows that Walker 256/B cells induce skeletal metastases associated with oxidative damage in the bone microenvironment. ATA reduced the oxidative stress damage, enhanced osteosclerosis and tumor cell apoptosis both in vitro and in vivo

    Facial lesions in piglets with intact or grinded teeth

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Piglets are born with eight sharp teeth that during nursing can cause facial lesions on littermates and teat lesions on the sow. Teeth grinding in piglets is therefore often practiced to reduce these lesions. The aim of this study was to assess the consequences of grinding piglet teeth in regard to the occurrence of lesions.</p> <p>In this study the piglets' teeth were grinded in 28 litters, and in 36 litters the piglets' teeth were kept intact. Twice, one time during the first week and one time during the second week after birth facial lesions of the piglets were scored and the teats of the sows were examined for lesions. The facial lesion score accounted for the amount and severity of lesions. The individual observations on piglets in the litter were synthesized in a litter facial lesion score.</p> <p>Findings</p> <p>69.8% and 43.5% of the piglets had facial lesions in week 1 and week 2 respectively. The effect of treatment was not significant on litter facial lesion score. The litter facial lesion score was higher in week 1 than in week 2 (<it>p </it>< 0.001) and higher in large litters (<it>p </it>= 0.003) than in small litters. Mortality between week 1 and week 2 was higher in litters with intact teeth (<it>p </it>= 0.02). Sow teat lesions only occurred if litters had intact teeth.</p> <p>Conclusions</p> <p>According to our results teeth grinding is only justifiable in large litters.</p

    Charge gap in the one--dimensional dimerized Hubbard model at quarter-filling

    Full text link
    We propose a quantitative estimate of the charge gap that opens in the one-dimensional dimerized Hubbard model at quarter-filling due to dimerization, which makes the system effectively half--filled, and to repulsion, which induces umklapp scattering processes. Our estimate is expected to be valid for any value of the repulsion and of the parameter describing the dimerization. It is based on analytical results obtained in various limits (weak coupling, strong coupling, large dimerization) and on numerical results obtained by exact diagonalization of small clusters. We consider two models of dimerization: alternating hopping integrals and alternating on--site energies. The former should be appropriate for the Bechgaard salts, the latter for compounds where the stacks are made of alternating TMTSFTMTSF and TMTTFTMTTF molecules. % (TMTSF)2X(TMTSF)_2 X and (TMTTF)2X(TMTTF)_2 X (XX denotes ClO4ClO_4, PF6PF_6, BrBr...).Comment: 33 pages, RevTeX 3.0, figures on reques

    Hemodynamic and antifibrotic effects of a selective liver nitric oxide donor V-PYRRO/NO in bile duct ligated rats.

    Get PDF
    AIM: To assess whether a liver specific nitric oxide (NO) donor (V-PYRRO/NO) would prevent the development of portal hypertension and liver fibrosis in rats with bile duct ligation (BDL). METHODS: Treatment (placebo or V-PYRRO/NO 0.53 micromol/kg per hour) was administered i.v. to rats 2 d before BDL (D-2) and maintained until the day of hemodynamic measurement (D26). Intra-hepatic NO level was estimated by measuring liver cGMP level. Effects of V-PYRRO/NO on liver fibrosis and lipid peroxidation were also assessed. RESULTS: Compared to placebo treatment, V-PYRRO/NO improved splanchnic hemodynamics in BDL rats: portal pressure was significantly reduced by 27% (P&lt;0.0001) and collateral circulation development was almost completely blocked (splenorenal shunt blood flow by 74%, P=0.007). Moreover, V-PYRRO/NO significantly prevented liver fibrosis development in BDL rats (by 30% in hepatic hydroxyproline content and 31% in the area of fibrosis, P&lt;0.0001 respectively), this effect being probably due to a decrease in lipid peroxidation by 44% in the hepatic malondialdehyde level (P=0.007). Interestingly, we observed a significant and expected increase in liver cGMP, without any systemic hemodynamic effects (mean arterial pressure, vascular systemic resistance and cardiac output) in both sham-operated and BDL rats treated with V-PYRRO/NO. This result is in accordance with studies on V-PYRRO/NO metabolism showing a specific release of NO in the liver. CONCLUSION: Continuous administrations of V-PYRRO/NO in BDL rats improved liver fibrosis and splanchnic hemodynamics without any noxious systemic hemo-dynamic effects

    Visualising Conversation Structure across Time: Insights into Effective Doctor-Patient Consultations

    Get PDF
    Effective communication between healthcare professionals and patients is critical to patients’ health outcomes. The doctor/patient dialogue has been extensively researched from different perspectives, with findings emphasising a range of behaviours that lead to effective communication. Much research involves self-reports, however, so that behavioural engagement cannot be disentangled from patients’ ratings of effectiveness. In this study we used a highly efficient and time economic automated computer visualisation measurement technique called Discursis to analyse conversational behaviour in consultations. Discursis automatically builds an internal language model from a transcript, mines the transcript for its conceptual content, and generates an interactive visual account of the discourse. The resultant visual account of the whole consultation can be analysed for patterns of engagement between interactants. The findings from this study show that Discursis is effective at highlighting a range of consultation techniques, including communication accommodation, engagement and repetition
    • …
    corecore