Evolution of precipitates, in particular cruciform and cuboid particles, during simulated direct charging of thin slab cast vanadium microalloyed steels

A study has been undertaken of four vanadium based steels which have been processed by a simulated direct charging route using processing parameters typical of thin slab casting, where the cast product has a thickness of 50 to 80mm ( in this study 50 mm) and is fed directly to a furnace to equalise the microstructure prior to rolling. In the direct charging process, cooling rates are faster, equalisation times shorter and the amount of deformation introduced during rolling less than in conventional practice. Samples in this study were quenched after casting, after equalisation, after 4th rolling pass and after coiling, to follow the evolution of microstructure. The mechanical and toughness properties and the microstructural features might be expected to differ from equivalent steels, which have undergone conventional processing. The four low carbon steels (~0.06wt%) which were studied contained 0.1wt%V (V-N), 0.1wt%V and 0.010wt%Ti (V-Ti), 0.1wt%V and 0.03wt%Nb (V-Nb), and 0.1wt%V, 0.03wt%Nb and 0.007wt%Ti (V-Nb-Ti). Steels V-N and V-Ti contained around 0.02wt% N, while the other two contained about 0.01wt%N. The as-cast steels were heated at three equalising temperatures of 1050C, 1100C or 1200C and held for 30-60 minutes prior to rolling. Optical microscopy and analytical electron microscopy, including parallel electron energy loss spectroscopy (PEELS), were used to characterise the precipitates. In the as-cast condition, dendrites and plates were found. Cuboid particles were seen at this stage in Steel V-Ti, but they appeared only in the other steels after equalization. In addition, in the final product of all the steels, fine particles were seen, but it was only in the two titanium steels that cruciform precipitates were present. PEELS analysis showed that the dendrites, plates, cuboids, cruciforms and fine precipitates were essentially nitrides. The two Ti steels had better toughness than the other steels but inferior lower yield stress values. This was thought to be, in part, due to the formation of cruciform precipitates in austenite, thereby removing nitrogen and the microalloying elements which would have been expected to precipitate in ferrite as dispersion hardening particles

Offenders' Crime Narratives across Different Types of Crimes

The current study explores the roles offenders see themselves playing during an offence and their relationship to different crime types. One hundred and twenty incarcerated offenders indicated the narrative roles they acted out whilst committing a specific crime they remembered well. The data were subjected to Smallest Space Analysis (SSA) and four themes were identified: Hero, Professional, Revenger and Victim in line with the recent theoretical framework posited for Narrative Offence Roles (Youngs & Canter, 2012). Further analysis showed that different subsets of crimes were more like to be associated with different narrative offence roles. Hero and Professional were found to be associated with property offences (theft, burglary and shoplifting), drug offences and robbery and Revenger and Victim were found to be associated with violence, sexual offences and murder. The theoretical implications for understanding crime on the basis of offenders' narrative roles as well as practical implications are discussed

State-space models' dirty little secrets: even simple linear Gaussian models can have estimation problems

State-space models (SSMs) are increasingly used in ecology to model time-series such as animal movement paths and population dynamics. This type of hierarchical model is often structured to account for two levels of variability: biological stochasticity and measurement error. SSMs are flexible. They can model linear and nonlinear processes using a variety of statistical distributions. Recent ecological SSMs are often complex, with a large number of parameters to estimate. Through a simulation study, we show that even simple linear Gaussian SSMs can suffer from parameter- and state-estimation problems. We demonstrate that these problems occur primarily when measurement error is larger than biological stochasticity, the condition that often drives ecologists to use SSMs. Using an animal movement example, we show how these estimation problems can affect ecological inference. Biased parameter estimates of a SSM describing the movement of polar bears (\textit{Ursus maritimus}) result in overestimating their energy expenditure. We suggest potential solutions, but show that it often remains difficult to estimate parameters. While SSMs are powerful tools, they can give misleading results and we urge ecologists to assess whether the parameters can be estimated accurately before drawing ecological conclusions from their results

Reconstitution of the complete pathway of ITS2 processing at the pre-ribosome

Removal of internal transcribed spacer 2 (ITS2) from pre-ribosomal RNA is essential to make functional ribosomes. This complicated processing reaction begins with a single endonucleolytic cleavage followed by exonucleolytic trimming at both new cleavage sites to generate mature 5.8S and 25S rRNA. We reconstituted the 7S -> 5.8S processing branch within ITS2 using purified exosome and its nuclear cofactors. We find that both Rrp44's ribonuclease activities are required for initial RNA shortening followed by hand over to the exonuclease Rrp6. During the in vitro reaction, ITS2-associated factors dissociate and the underlying 'foot' structure of the pre-60S particle is dismantled. 7S pre-rRNA processing is independent of 5S RNP rotation, but 26S -> 25S trimming is a precondition for subsequent 7S -> 5.8S processing. To complete the in vitro assay, we reconstituted the entire cycle of ITS2 removal with a total of 18 purified factors, catalysed by the integrated activities of the two participating RNA-processing machines, the Las1 complex and nuclear exosome

In Situ Detection of Active Edge Sites in Single-Layer MoS2_2 Catalysts

MoS2 nanoparticles are proven catalysts for processes such as hydrodesulphurization and hydrogen evolution, but unravelling their atomic-scale structure under catalytic working conditions has remained significantly challenging. Ambient pressure X-ray Photoelectron Spectroscopy (AP-XPS) allows us to follow in-situ the formation of the catalytically relevant MoS2 edge sites in their active state. The XPS fingerprint is described by independent contributions to the Mo3d core level spectrum whose relative intensity is sensitive to the thermodynamic conditions. Density Functional Theory (DFT) is used to model the triangular MoS2 particles on Au(111) and identify the particular sulphidation state of the edge sites. A consistent picture emerges in which the core level shifts for the edge Mo atoms evolve counter-intuitively towards higher binding energies when the active edges are reduced. The shift is explained by a surprising alteration in the metallic character of the edge sites, which is a distinct spectroscopic signature of the MoS2 edges under working conditions

Magneto-optical Trapping of Cadmium

We report the laser-cooling and confinement of Cd atoms in a magneto-optical trap, and characterize the loading process from the background Cd vapor. The trapping laser drives the 1S0-1P1 transition at 229 nm in this two-electron atom and also photoionizes atoms directly from the 1P1 state. This photoionization overwhelms the other loss mechanisms and allows a direct measurement of the photoionization cross section, which we measure to be 2(1)x10^(-16)cm^(2) from the 1P1 state. When combined with nearby laser-cooled and trapped Cd^(+) ions, this apparatus could facilitate studies in ultracold interactions between atoms and ions.Comment: 8 pages, 11 figure

Radiocarbon Chronologies and Extinction Dynamics of the Late Quaternary Mammalian Megafauna of the Taimyr Peninsula, Russian Federation

This paper presents 75 new radiocarbon dates based on late Quaternary mammal remains recovered from eastern Taimyr Peninsula and adjacent parts of the northern Siberian lowlands, Russian Federation, including specimens of woolly mammoth (Mammuthus primigenius), steppe bison (Bison priscus), muskox (Ovibos moschatus), moose (Alces alces), reindeer (Rangifer tarandus), horse (Equus caballus) and wolf (Canis lupus). New evidence permits reanalysis of megafaunal extinction dynamics in the Asian high Arctic periphery. Increasingly, radiometric records of individual species show evidence of a gap at or near the Pleistocene/Holocene boundary (PHB). In the past, the PHB gap was regarded as significant only when actually terminal, i.e., when it marked the apparent ‘‘last’’ occurrence of a species (e.g., current ‘‘last’’ occurrence date for woolly mammoth in mainland Eurasia is 9600 yr BP). However, for high Arctic populations of horses and muskoxen the gap marks an interruption rather than extinction, because their radiocarbon records resume, nearly simultaneously, much later in the Holocene. Taphonomic effects, ΔC14 flux, and biased sampling are unlikely explanations for these hiatuses. A possible explanation is that the gap is the signature of an event, of unknown nature, that prompted the nearly simultaneous crash of many megafaunal populations in the high Arctic and possibly elsewhere in Eurasia.

History-sensitive versus future-sensitive approaches to security in distributed systems

We consider the use of aspect-oriented techniques as a flexible way to deal with security policies in distributed systems. Recent work suggests to use aspects for analysing the future behaviour of programs and to make access control decisions based on this; this gives the flavour of dealing with information flow rather than mere access control. We show in this paper that it is beneficial to augment this approach with history-based components as is the traditional approach in reference monitor-based approaches to mandatory access control. Our developments are performed in an aspect-oriented coordination language aiming to describe the Bell-LaPadula policy as elegantly as possible. Furthermore, the resulting language has the capability of combining both history- and future-sensitive policies, providing even more flexibility and power.Comment: In Proceedings ICE 2010, arXiv:1010.530

In the Interests of clients or commerce? Legal aid, supply, demand, and 'ethical indeterminacy' in criminal defence work

As a professional, a lawyer's first duty is to serve the client's best interests, before simple monetary gain. In criminal defence work, this duty has been questioned in the debate about the causes of growth in legal aid spending: is it driven by lawyers (suppliers) inducing unnecessary demand for their services or are they merely responding to increased demand? Research reported here found clear evidence of a change in the handling of cases in response to new payment structures, though in ways unexpected by the policy's proponents. The paper develops the concept of 'ethical indeterminacy' as a way of understanding how defence lawyers seek to reconcile the interests of commerce and clients. Ethical indeterminacy suggests that where different courses of action could each be said to benefit the client, the lawyer will tend to advise the client to decide in the lawyer's own interests. Ethical indeterminacy is mediated by a range of competing conceptions of 'quality' and 'need'. The paper goes on to question the very distinction between 'supply' and 'demand' in the provision of legal services