Eigenvalue Placement and Stabilization by Constrained Optimization

A pole placement algorithm is proposed which uses constrained nonlinear optimization techniques on a finite dimensional model of a linear n degree of freedom system. Low order feedback control is assumed where r poles may be assigned; r being the rank of the sensor coefficient matrix. It is shown that by combining feedback control theory methods with optimization techniques, one can ensure the stability characteristics of a system, and can alter its transient response

Recombinant Canine Coronaviruses in Dogs, Europe

Subtype IIb originates from recombination with porcine transmissible gastroenteritis virus

Molecular Epidemiology of Canine Parvovirus, Europe

Canine parvovirus (CPV), which causes hemorrhagic enteritis in dogs, has 3 antigenic variants: types 2a, 2b, and 2c. Molecular method assessment of the distribution of the CPV variants in Europe showed that the new variant CPV-2c is widespread in Europe and that the viruses are distributed in different countries

Analysis of Aeroheating Augmentation due to Reaction Control System Jets on Orion Crew Exploration Vehicle

The analysis of effects of the reaction control system jet plumes on aftbody heating of Orion entry capsule is presented. The analysis covered hypersonic continuum part of the entry trajectory. Aerothermal environments at flight conditions were evaluated using Langley Aerothermal Upwind Relaxation Algorithm (LAURA) code and Data Parallel Line Relaxation (DPLR) algorithm code. Results show a marked augmentation of aftbody heating due to roll, yaw and aft pitch thrusters. No significant augmentation is expected due to forward pitch thrusters. Of the conditions surveyed the maximum heat rate on the aftshell is expected when firing a pair of roll thrusters at a maximum deceleration condition

Oral Mutian®X stopped faecal feline coronavirus shedding by naturally infected cats

Feline coronavirus (FCoV) is common among cats living indoors in groups. In about 10% of infected cats, a potentially lethal disease, feline infectious peritonitis (FIP) occurs. Virus transmission is faecal-oral. Mutian® Xraphconn (Mutian X) is a product marketed to treat cats with FIP but is also being used to stop virus shedding, although no clear guidelines exist for its use for this purpose. The aim of this study was to establish the minimum dose and treatment duration required to ensure viral clearance from the faeces of asymptomatic virus-shedding cats. In five multicat households, 29 cats naturally infected with FCoV and actively shedding virus in the faeces were given Mutian X pills. Virus shedding was monitored using reverse-transcription quantitative polymerase chain reaction (RT-qPCR) controlled for faecal inhibitors to ensure sensitivity. Mutian X given orally cleared the virus in 29 cats; although four cats required a repeated course to finally stop virus shedding. A dose of 4 mg/kg q24 h for four days was found to be the optimal treatment protocol: 2 mg/kg cleared only 80% of cats. Post-treatment using a sensitive RT-qPCR test was essential to ensure that virus clearance had been achieved, since failure to clear even one cat can result in re-infection of the others. Records of virus shedding by cats before treatment provided a retrospective control: significantly more cats stopped shedding virus after Mutian X than recovered from infection during the control period (p < .00001). This is the first report of the successful elimination of faecal FCoV shedding in chronically infected cats

Survival of a sars-cov-2 surrogate on flow-pack polyethylene and polystyrene food trays at refrigeration and room temperature conditions

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the etiological agent of the current pandemic referred to as coronavirus disease 2019, is spread by direct and indirect transmission between humans, including contact with contaminated surfaces, frozen food, packaging materials, and storage environments. Food contamination may occur in the “farm-to-table” lifecycle through contact with food handlers and environments. In the present study, the survival of a SARS-CoV-2 surrogate (feline coronavirus (FCoV)) at room temperature and refrigeration conditions for different time intervals on two types packaging widely used packaging, namely flow-pack polyethylene and polystyrene food trays, was investigated. FCoV was stable on the flow-pack polyethylene for 48 h and 120 h at room temperature and 4◦C, respectively, while it persisted on polystyrene food trays for 36 h at room temperature and for 120 h at +4◦C. The results of our study highlight the possible implications of food packaging in the spread of SARS-CoV-2 during the current pandemic

Do dogs and cats passively carry sars-cov-2 on hair and pads?

The epidemiological role of domestic animals in the spread and transmission of SARS-CoV-2 to humans has been investigated in recent reports, but some aspects need to be further clarified. To date, only in rare cases have dogs and cats living with COVID-19 patients been found to harbour SARS-CoV-2, with no evidence of pet-to-human transmission. The aim of the present study was to verify whether dogs and cats act as passive mechanical carriers of SARS-CoV-2 when they live in close contact with COVID-19 patients. Cutaneous and interdigital swabs collected from 48 dogs and 15 cats owned by COVID-19 patients were tested for SARS-CoV-2 by qRT-PCR. The time elapsed between owner swab positivity and sample collection from pets ranged from 1 to 72 days, with a median time of 23 days for dogs and 39 days for cats. All samples tested negative, suggesting that pets do not passively carry SARS-CoV-2 on their hair and pads, and thus they likely do not play an important role in the virus transmission to humans. This data may contribute to confirming that the direct contact with the hair and pads of pets does not represent a route for the transmission of SARS-CoV-2

Air-breathing fuel cell stacks for portable power applications

Increasing attention is being directed towards polymer electrolyte fuel cells as battery replacements because of their potentially superior energy densities and the possibility of `mechanical` refueling. On the low end of the power requirement scale (ca. 10 W), fuel cells can compete with primary and secondary batteries only if the fuel cell systems are simple, inexpensive, and reliable. Considerations of cost and simplicity (and minimal parasitic power) discourage the use of conventional performance enhancing subsystems (e.g., humidification, cooling, or forced-reactant flow). We are developing a stack design that is inherently self-regulating to allow effective operation without the benefit of such auxiliary components. The air cathode does not use forced flow to replenish the depleted oxygen. Instead, the oxygen in the air must diffuse into the stack from the periphery of the unit cells. For this reason the stack is described as `air-breathing.` This configuration limits the ability of water to escape which prevents the polymer electrolyte membranes from drying out, even at relatively high continuous operation temperatures (+60 degrees C). This results in stacks with reliable and stable performance. This air-breathing configuration assumes a unique stack geometry that utilizes circular flow-field plates with an annular hydrogen feed manifold and the single tie-bolt extending up through the central axis of the stack. With this geometry, the hydrogen supply to the unit cells is radially outward, and the air supply is from the periphery inward. This configuration has several advantages. The entire periphery is free to air access and allows greater heat conduction to enhance cooling. Furthermore, all of the components in the stack (e.g., the flow-fields, seals and membrane/electrode assemblies), are radially symmetrical, so part fabrication is simple and the entire system is potentially low-cost. Lastly, this configuration is compact and lightweight

Substrate Suppression of Thermal Roughness in Stacked Supported Bilayers

We have fabricated a stack of five 1,2-dipalmitoyl-sn-3-phosphatidylethanolamine (DPPE) bilayers supported on a polished silicon substrate in excess water. The density profile of these stacks normal to the substrate was obtained through analysis of x-ray reflectivity. Near the substrate, we find the layer roughness and repeat spacing are both significantly smaller than values found in bulk multilayer systems. The reduced spacing and roughness result from suppression of lateral fluctuations due to the flat substrate boundary. The layer spacing decrease then occurs due to reduced Helfrich repulsion.This work was partially supported by NSF Grants No. DMR-0706369 and No. DMR-0706665. Use of the Advanced Photon Sourcewas supported by theUSDepartment of Energy, Office of Science, Office of Basic Energy Sciences, under Contract No. DE-AC02-06CH11357. SKS and ANP wish to acknowledge support from the Office of Basic Energy Sciences, US Department of Energy, via Grant No. DE-FG02- 04ER46173. We would also like to thank Suresh Narayanan for his support of the experimental work at Sector 8-ID

Human‐to‐cat sars‐cov‐2 transmission: Case report and full‐genome sequencing from an infected pet and its owner in Northern Italy

There have been previous reports of the human‐to‐cat transmission of SARS‐CoV‐2, but there are only a few molecular studies that have compared the whole genome of the virus in cats and their owners. We here describe a case of domestic SARS‐CoV‐2 transmission from a healthcare worker to his cat for which nasopharyngeal swabs of both the cat and its owner were used for full-genome analysis. The results indicate that quarantine measures should be extended to pets living in SARS‐CoV‐2‐infected households