Combining laser frequency combs and iodine cell calibration techniques for Doppler detection of exoplanets

Exoplanets can be detected from a time series of stellar spectra by looking for small, periodic shifts in the absorption features that are consistent with Doppler shifts caused by the presence of an exoplanet, or multiple exoplanets, in the system. While hundreds of large exoplanets have already been discovered with the Doppler technique (also called radial velocity), our goal is to improve the measurement precision so that many Earth-like planets can be detected. The smaller mass and longer period of true Earth analogues require the ability to detect a reflex velocity of ~10 cm/s over long time periods. Currently, typical astronomical spectrographs calibrate using either Iodine absorptive cells or Thorium Argon lamps and achieve ~10 m/s precision, with the most stable spectrographs pushing down to ~2 m/s. High velocity precision is currently achieved at HARPS by controlling the thermal and pressure environment of the spectrograph. These environmental controls increase the cost of the spectrograph, and it is not feasible to simply retrofit existing spectrometers. We propose a fiber-fed high precision spectrograph design that combines the existing ~5000-6000 A Iodine calibration system with a high-precision Laser Frequency Comb (LFC) system from ~6000-7000 A that just meets the redward side of the Iodine lines. The scientific motivation for such a system includes: a 1000 A span in the red is currently achievable with LFC systems, combining the two calibration methods increases the wavelength range by a factor of two, and moving redward decreases the 'noise' from starspots. The proposed LFC system design employs a fiber laser, tunable serial Fabry-Perot cavity filters to match the resolution of the LFC system to that of standard astronomical spectrographs, and terminal ultrasonic vibration of the multimode fiber for a stable point spread function

Interpolation Method for Update with Out-of-Sequence Measurements: The Augmented Fixed-Lag Smoother

In this study, the authors propose a novel method to handle OOSMs in Kalman filtering. The proposed method, called the augmented fixed-lag smoother (AFLS), is based on the fixed-lag smoother (FLS) formulation, which has been shown to be optimal [10]. We generate the OOSM node from the two adjacent nodes, plug the generated estimations into the state vector and the covariance matrix, and update the filter with OOSMs using the FLS update equation. This approach gives a generalized solution that can handle any number of OOSMs. We also extend the AFLS algorithm to nonlinear system, called the extended AFLS (EAFLS), and give an application example on a satellite-tracking problem

Implementation and validation of a CubeSat laser transmitter

The paper presents implementation and validation results for a CubeSat-scale laser transmitter. The master oscillator power amplifier (MOPA) design produces a 1550 nm, 200mW average power optical signal through the use of a directly modulated laser diode and a commercial fiber amplifier. The prototype design produces high-fidelity M-ary pulse position modulated (PPM) waveforms (M=8 to 128), targeting data rates > 10 Mbit/s while meeting a constraining 8W power allocation. We also present the implementation of an avalanche photodiode (APD) receiver with measured transmitter-to-receiver performance within 3 dB of theory. Via loopback, the compact receiver design can provide built-in self-test and calibration capabilities, and supports incremental on-orbit testing of the design

Fractional processes: from Poisson to branching one

Fractional generalizations of the Poisson process and branching Furry process are considered. The link between characteristics of the processes, fractional differential equations and Levy stable densities are discussed and used for construction of the Monte Carlo algorithm for simulation of random waiting times in fractional processes. Numerical calculations are performed and limit distributions of the normalized variable Z=N/ are found for both processes.Comment: 11 pages, 6 figure

Payload characterization for CubeSat demonstration of MEMS deformable mirrors

Coronagraphic space telescopes require wavefront control systems for high-contrast imaging applications such as exoplanet direct imaging. High-actuator-count MEMS deformable mirrors (DM) are a key element of these wavefront control systems yet have not been flown in space long enough to characterize their on-orbit performance. The MEMS Deformable Mirror CubeSat Testbed is a conceptual nanosatellite demonstration of MEMS DM and wavefront sensing technology. The testbed platform is a 3U CubeSat bus. Of the 10 x 10 x 34.05 cm (3U) available volume, a 10 x 10 x 15 cm space is reserved for the optical payload. The main purpose of the payload is to characterize and calibrate the onorbit performance of a MEMS deformable mirror over an extended period of time (months). Its design incorporates both a Shack Hartmann wavefront sensor (internal laser illumination), and a focal plane sensor (used with an external aperture to image bright stars). We baseline a 32-actuator Boston Micromachines Mini deformable mirror for this mission, though the design is flexible and can be applied to mirrors from other vendors. We present the mission design and payload architecture and discuss experiment design, requirements, and performance simulations.United States. National Aeronautics and Space Administration (Space Technology Research Fellowship

Simulating the WFIRST coronagraph Integral Field Spectrograph

A primary goal of direct imaging techniques is to spectrally characterize the atmospheres of planets around other stars at extremely high contrast levels. To achieve this goal, coronagraphic instruments have favored integral field spectrographs (IFS) as the science cameras to disperse the entire search area at once and obtain spectra at each location, since the planet position is not known a priori. These spectrographs are useful against confusion from speckles and background objects, and can also help in the speckle subtraction and wavefront control stages of the coronagraphic observation. We present a software package, the Coronagraph and Rapid Imaging Spectrograph in Python (crispy) to simulate the IFS of the WFIRST Coronagraph Instrument (CGI). The software propagates input science cubes using spatially and spectrally resolved coronagraphic focal plane cubes, transforms them into IFS detector maps and ultimately reconstructs the spatio-spectral input scene as a 3D datacube. Simulated IFS cubes can be used to test data extraction techniques, refine sensitivity analyses and carry out design trade studies of the flight CGI-IFS instrument. crispy is a publicly available Python package and can be adapted to other IFS designs.Comment: 15 page

Design and Performance of the AERO-VISTA Magnetometer

We describe the design and performance of the magnetometer instrument for the CubeSat mission AERO-VISTA. AERO-VISTA requires in-situ vector magnetic measurements with magnetic precision and repeatability better than 100 nT at a minimum rate of 10 Hz. Our magnetometer system uses the three-axis Honeywell HMC1053 anisotropic magnetoresistive (AMR) sensor. As built, our instrument exhibits intrinsic magnetic noise better than 10 nTrms from 0.1 to 10 Hz, though self-interference effects degrade performance to about 50 nT to 200 nT uncertainty. The analog and mixed signal portion of each magnetometer occupies about 8 square centimeters of circuit board space and draws about 100 mW. We describe the selection of major components, detail the schematic design of the analog electronics, and derive a noise budget from datasheet component specifications. The theoretical noise budget matches experimental results to better than 20%. We also describe the digital electronics and software which operates an analog to digital converter interface and implements a sampling method that allows for improved separation of offset and magnetic field signal contributions. We show the spectral characteristics of the magnetic field noise floor including self-interference effects. Our magnetometer design can be used in whole or in part on other small satellites which plan to use similar AMR magnetic sensors

Design and Verification of a Clock System for Orbital Radio Interferometry

Radio interferometry using multiple small satellites will enable measurements with high angular resolution for remote sensing and astronomy. The NASA sponsored Auroral Emissions Radio Explorer (AERO) and Vector Interferometry Space Technology using AERO (VISTA) CubeSats will demonstrate orbital interferometry from 0.1 MHz to 15 MHz, frequencies which are largely blocked by the ionosphere. We report on the design and testing of a clock system for radio interferometry between these orbital receivers. We discuss the clock system design up to PCB fabrication, including requirements flow and major hardware trades. The performance of the timing components has been verified using a phase noise test set with a high-quality benchtop crystal. While these results are presented for the AERO-VISTA mission payload, they are more generally applicable to any orbital interferometry platform with multiple satellites

The Global Impact of ITAR on the For-Profit and Non-Profit Space Communities

Under the United States Arms Export Control Act, the International Traffic in Arms Regulations (ITAR) control the export of technologies that are specified as defense articles on the United States Munitions List (USML). The Directorate of Defense Trade Controls (DDTC) within the Department of State (DoS) interprets and enforces these regulations in an effort to safeguard national security by denying advanced military technology to potential competitors

Wavefront control in space with MEMS deformable mirrors for exoplanet direct imaging

To meet the high contrast requirement of 1×10[superscript −10] to image an Earth-like planet around a sun-like star, space telescopes equipped with coronagraphs require wavefront control systems. Deformable mirrors (DMs) are a key element of a wavefront control system, as they correct for imperfections, thermal distortions, and diffraction that would otherwise corrupt the wavefront and ruin the contrast. The goal of the CubeSat DM technology demonstration mission is to test the ability of a microelectromechanical system (MEMS) DM to perform wavefront control on-orbit on a nanosatellite platform. We consider two approaches for an MEMS DM technology demonstration payload that will fit within the mass, power, and volume constraints of a CubeSat: (1) a Michelson interferometer and (2) a Shack-Hartmann wavefront sensor. We clarify the constraints on the payload based on the resources required for supporting CubeSat subsystems drawn from subsystems that we have developed for a different CubeSat flight project. We discuss results from payload laboratory prototypes and their utility in defining mission requirements