Scaling forces to asteroid surfaces: The role of cohesion

The scaling of physical forces to the extremely low ambient gravitational acceleration regimes found on the surfaces of small asteroids is performed. Resulting from this, it is found that van der Waals cohesive forces between regolith grains on asteroid surfaces should be a dominant force and compete with particle weights and be greater, in general, than electrostatic and solar radiation pressure forces. Based on this scaling, we interpret previous experiments performed on cohesive powders in the terrestrial environment as being relevant for the understanding of processes on asteroid surfaces. The implications of these terrestrial experiments for interpreting observations of asteroid surfaces and macro-porosity are considered, and yield interpretations that differ from previously assumed processes for these environments. Based on this understanding, we propose a new model for the end state of small, rapidly rotating asteroids which allows them to be comprised of relatively fine regolith grains held together by van der Waals cohesive forces.Comment: 54 pages, 7 figure

A computer-aided telescope pointing system utilizing a video star tracker

The Video Inertial Pointing (VIP) System developed to satisfy the acquisition and pointing requirements of astronomical telescopes is described. A unique feature of the system is the use of a single sensor to provide information for the generation of three axis pointing error signals and for a cathode ray tube (CRT) display of the star field. The pointing error signals are used to update the telescope's gyro stabilization and the CRT display is used by an operator to facilitate target acquisition and to aid in manual positioning of the telescope optical axis. A model of the system using a low light level vidicon built and flown on a balloon-borne infrared telescope is briefly described from a state of the art charge coupled device (CCD) sensor. The advanced system hardware is described and an analysis of the multi-star tracking and three axis error signal generation, along with an analysis and design of the gyro update filter, are presented. Results of a hybrid simulation are described in which the advanced VIP system hardware is driven by a digital simulation of the star field/CCD sensor and an analog simulation of the telescope and gyro stabilization dynamics

Microwave Remote Sensing of Ocean Surface Wind Speed and Rain Rates over Tropical Storms

The value of using narrowly spaced frequencies within a microwave band to measure wind speeds and rain rates over tropical storms with radiometers is reviewed. The technique focuses on results obtained in the overflights of Hurricane Allen during 5 and 8 of August, 1980

X-ray diffraction from shock-loaded polycrystals

X-ray diffraction was demonstrated from shock-compressed polycrystalline metal on nanosecond time scales. Laser ablation was used to induce shock waves in polycrystalline foils of Be, 25 to 125 microns thick. A second laser pulse was used to generate a plasma x-ray source by irradiation of a Ti foil. The x-ray source was collimated to produce a beam of controllable diameter, and the beam was directed at the Be sample. X-rays were diffracted from the sample, and detected using films and x-ray streak cameras. The diffraction angle was observed to change with shock pressure. The diffraction angles were consistent with the uniaxial (elastic) and isotropic (plastic) compressions expected for the loading conditions used. Polycrystalline diffraction will be used to measure the response of the crystal lattice to high shock pressures and through phase changes

Diammonium biphenyl-4,4′-disulfonate

In the title salt, 2NH4 +·C12H8O6S2 2−, the dianion has crystallographic inversion symmetry. A three-dimensional framework is formed from primary hydrogen-bonded sheet structures comprising ammonium N—H⋯Osulfonate inter­actions and is linked peripherally through the biphenyl residues of the anions. This open framework has 43 Å3 solvent-accessible voids

Time-Resolved X-Ray Diffraction Investigation of Superheating-Melting of Crystals under Ultrafast Heating

The maximum superheating of a solid prior to melting depends on the effective dimensionless nucleation energy barrier, heterogeneities such as free surfaces and defects, and heating rates. Superheating is rarely achieved with conventional slow heating due to the dominant effect of heterogeneous nucleation. In present work, we investigate the superheating-melting behavior of crystals utilizing ultrafast heating techniques such as exploding wire and laser irradiation, and diagnostics such as time-resolved X-ray diffraction combined with simultaneous measurements on voltage and current (for exploding wire) and particle velocity (for laser irradiation). Experimental designs and preliminary results are presented

On the Properties of Plastic Ablators in Laser-Driven Material Dynamics Experiments

Radiation hydrodynamics simulations were used to study the effect of plastic ablators in laser-driven shock experiments. The sensitivity to composition and equation of state was found to be 5-10% in ablation pressure. As was found for metals, a laser pulse of constant irradiance gave a pressure history which decreased by several percent per nanosecond. The pressure history could be made more constant by adjusting the irradiance history. The impedance mismatch with the sample gave an increase o(100%) in the pressure transmitted into the sample, for a reduction of several tens of percent in the duration of the peak load applied to the sample, and structured the release history by adding a release step to a pressure close to the ablation pressure. Algebraic relations were found between the laser pulse duration, the ablator thickness, and the duration of the peak pressure applied to the sample, involving quantities calculated from the equations of state of the ablator and sample using shock dynamics.Comment: Typos fixe

Friction and wear of human hair fibres

An experimental study of the tribological properties of hair fibres is reported, and the effect of surface treatment on the evolution of friction and wear during sliding. Specifically, orthogonally crossed fibre/fibre contacts under a compressive normal load over a series of 10,000 cycle studies are investigated. Reciprocating sliding at a velocity of 0.4 mm/s−1, over a track length of 0.8 mm, was performed at 18oC and 40-50% relative humidity. Hair fibres retaining their natural sebum were studied, as well as those stripped of their sebum via hexane cleaning, and hair fibres conditioned using a commercially available product. Surface topography modifications resulting from wear were imaged using scanning electron microscopy and quantified using white light interferometry. Hair fibres that presented sebum or conditioned product at the fibre/fibre junction exhibited initial coefficients of friction at least 25% lower than those that were cleaned with hexane. Coefficients of friction were observed to depend on the directionality of sliding for hexane cleaned hair fibres after sufficient wear cycles that cuticle lifting was present, typically on the order 1,000 cycles. Cuticle flattening was observed for fibre/fibre junctions exposed to 10 mN compressive normal loads, whereas loads of 100 mN introduced substantial cuticle wear and fibre damage

Domain Coarsening in Systems Far from Equilibrium

The growth of domains of stripes evolving from random initial conditions is studied in numerical simulations of models of systems far from equilibrium such as Rayleigh-Benard convection. The scaling of the size of the domains deduced from the inverse width of the Fourier spectrum is studied for both potential and nonpotential models. The morphology of the domains and the defect structures are however quite different in the two cases, and evidence is presented for a second length scale in the nonpotential case.Comment: 11 pages, RevTeX; 3 uufiles encoded postscript figures appende

Perceived age discrimination across age in Europe: from an ageing society to a society for all ages

Ageism is recognized as a significant obstacle to older people's well-being, but age discrimination against younger people has attracted less attention. We investigate levels of perceived age discrimination across early to late adulthood, using data from the European Social Survey (ESS), collected in 29 countries (N = 56,272). We test for approximate measurement invariance across countries. We use local structural equation modeling as well as moderated nonlinear factor analysis to test for measurement invariance across age as a continuous variable. Using models that account for the moderate degree of noninvariance, we find that younger people report experiencing the highest levels of age discrimination. We also find that national context substantially affects levels of ageism experienced among older respondents. The evidence highlights that more research is needed to address ageism in youth and across the life span, not just old adulthood. It also highlights the need to consider factors that differently contribute to forms of ageism experienced by people at different life stages and ages.info:eu-repo/semantics/acceptedVersio