535 research outputs found

    Non-optical Imaging of Flow, Boiling, and Salt Deposition in a Simulated Debris Bed

    Get PDF
    Determining flow and heat transfer characteristics in a debris bed or a packed bed is difficult due to the lack of optical access. Non-optical imaging methods, such as x-ray or neutron imaging, can be used to observe flow characteristics and particle deposition, as well as boiling in a packed bed. An amorphous Silicon detector based digital radiography camera can be used to image with either x-rays or neutrons at up to 100 frames per second. The digital radiography camera, coupled with digital image analysis techniques was used to characterize fluid fraction and flow rates in a simulated debris bed. A water percolation experiment was performed where a test section filled with 1-3 mm glass particles was used as a simulated debris bed, and properties such as packing fraction, volumetric flow rate, and evaporation rate were calculated both physically and using data from the images. The values obtained using the images were benchmarked against the physically calculated values and found to be in agreement, validating the image processing algorithms

    Genetic mapping of QTLs for drought tolerance in chickpea (Cicer arietinum L.)

    Get PDF
    Chickpea yield is severely affected by drought stress, which is a complex quantitative trait regulated by multiple small-effect genes. Identifying genomic regions associated with drought tolerance component traits may increase our understanding of drought tolerance mechanisms and assist in the development of drought-tolerant varieties. Here, a total of 187 F8 recombinant inbred lines (RILs) developed from an interspecific cross between drought-tolerant genotype GPF 2 (Cicer arietinum) and drought-sensitive accession ILWC 292 (C. reticulatum) were evaluated to identify quantitative trait loci (QTLs) associated with drought tolerance component traits. A total of 21 traits, including 12 morpho-physiological traits and nine root-related traits, were studied under rainfed and irrigated conditions. Composite interval mapping identified 31 QTLs at Ludhiana and 23 QTLs at Faridkot locations for morphological and physiological traits, and seven QTLs were identified for root-related traits. QTL analysis identified eight consensus QTLs for six traits and five QTL clusters containing QTLs for multiple traits on linkage groups CaLG04 and CaLG06. The identified major QTLs and genomic regions associated with drought tolerance component traits can be introgressed into elite cultivars using genomics-assisted breeding to enhance drought tolerance in chickpea

    Asexuality: Classification and characterization

    Get PDF
    This is a post-print version of the article. The official published version can be obtaineed at the link below.The term “asexual” has been defined in many different ways and asexuality has received very little research attention. In a small qualitative study (N = 4), individuals who self-identified as asexual were interviewed to help formulate hypotheses for a larger study. The second larger study was an online survey drawn from a convenience sample designed to better characterize asexuality and to test predictors of asexual identity. A convenience sample of 1,146 individuals (N = 41 self-identified asexual) completed online questionnaires assessing sexual history, sexual inhibition and excitation, sexual desire, and an open-response questionnaire concerning asexual identity. Asexuals reported significantly less desire for sex with a partner, lower sexual arousability, and lower sexual excitation but did not differ consistently from non-asexuals in their sexual inhibition scores or their desire to masturbate. Content analyses supported the idea that low sexual desire is the primary feature predicting asexual identity

    Biodegradable PEG-poly(ω-pentadecalactone- co - p -dioxanone) nanoparticles for enhanced and sustained drug delivery to treat brain tumors

    Get PDF
    Intracranial delivery of therapeutic agents is limited by penetration beyond the blood-brain barrier (BBB) and rapid metabolism of the drugs that are delivered. Convection-enhanced delivery (CED) of drugloaded nanoparticles (NPs) provides for local administration, control of distribution, and sustained drug release. While some investigators have shown that repeated CED procedures are possible, longer periods of sustained release could eliminate the need for repeated infusions, which would enhance safety and translatability of the approach. Here, we demonstrate that nanoparticles formed from poly(ethylene glycol)-poly(u-pentadecalactone-co-p-dioxanone) block copolymers [PEG-poly(PDL-co- DO)] are highly efficient nanocarriers that provide long-term release: small nanoparticles (less than 100 nm in diameter) continuously released a radiosensitizer (VE822) over a period of several weeks in vitro, provided widespread intracranial drug distribution during CED, and yielded significant drug retention within the brain for over 1 week. One advantage of PEG-poly(PDL-co-DO) nanoparticles is that hydrophobicity can be tuned by adjusting the ratio of hydrophobic PDL to hydrophilic DO monomers, thus making it possible to achieve a wide range of drug release rates and drug distribution profiles. When administered by CED to rats with intracranial RG2 tumors, and combined with a 5-day course of fractionated radiation therapy, VE822-loaded PEG-poly(PDL-co-DO) NPs significantly prolonged survival when compared to free VE822. Thus, PEG-poly(PDL-co-DO) NPs represent a new type of versatile nanocarrier system with potential for sustained intracranial delivery of therapeutic agents to treat brain tumors

    What motivates senior clinicians to teach medical students?

    Get PDF
    BACKGROUND: This study was designed to assess the motivations of senior medical clinicians to teach medical students. This understanding could improve the recruitment and retention of important clinical teachers. METHODS: The study group was 101 senior medical clinicians registered on a teaching list for a medical school teaching hospital (The Canberra Hospital, ACT, Australia). Their motivations to teach medical students were assessed applying Q methodology. RESULTS: Of the 75 participants, 18 (24%) were female and 57 (76%) were male. The age distribution was as follows: 30–40 years = 16 participants (21.3%), 41–55 years = 46 participants (61.3%) and >55 years = 13 participants (17.3%). Most participants (n = 48, 64%) were staff specialists and 27 (36%) were visiting medical officers. Half of the participants were internists (n = 39, 52%), 12 (16%) were surgeons, and 24 (32%) were other sub-specialists. Of the 26 senior clinicians that did not participate, two were women; 15 were visiting medical officers and 11 were staff specialists; 16 were internists, 9 were surgeons and there was one other sub-specialist. The majority of these non-participating clinicians fell in the 41–55 year age group. The participating clinicians were moderately homogenous in their responses. Factor analysis produced 4 factors: one summarising positive motivations for teaching and three capturing impediments for teaching. The main factors influencing motivation to teach medical students were intrinsic issues such as altruism, intellectual satisfaction, personal skills and truth seeking. The reasons for not teaching included no strong involvement in course design, a heavy clinical load or feeling it was a waste of time. CONCLUSION: This study provides some insights into factors that may be utilised in the design of teaching programs that meet teacher motivations and ultimately enhance the effectiveness of the medical teaching workforce

    What are we measuring? A critique of range of motion methods currently in use for Dupuytren's disease and recommendations for practice

    Get PDF
    Background: Range of motion is the most frequently reported measure used in practice to evaluate outcomes. A goniometer is the most reliable tool to assess range of motion yet, the lack of consistency in reporting prevents comparison between studies. The aim of this study is to identify how range of motion is currently assessed and reported in Dupuytren’s disease literature. Following analysis recommendations for practice will be made to enable consistency in future studies for comparability. This paper highlights the variation in range of motion reporting in Dupuytren’s disease. Methods: A Participants, Intervention, Comparison, Outcomes and Study design format was used for the search strategy and search terms. Surgery, needle fasciotomy or collagenase injection for primary or recurrent Dupuytren’s disease in adults were included if outcomes were monitored using range of motion to record change. A literature search was performed in May 2013 using subject heading and free-text terms to also capture electronic publications ahead of print. In total 638 publications were identified and following screening 90 articles met the inclusion criteria. Data was extracted and entered onto a spreadsheet for analysis. A thematic analysis was carried out to establish any duplication, resulting in the final range of motion measures identified. Results: Range of motion measurement lacked clarity, with goniometry reportedly used in only 43 of the 90 studies, 16 stated the use of a range of motion protocol. A total of 24 different descriptors were identified describing range of motion in the 90 studies. While some studies reported active range of motion, others reported passive or were unclear. Eight of the 24 categories were identified through thematic analysis as possibly describing the same measure, ‘lack of joint extension’ and accounted for the most frequently used. Conclusions: Published studies lacked clarity in reporting range of motion, preventing data comparison and meta-analysis. Percentage change lacks context and without access to raw data, does not allow direct comparison of baseline characteristics. A clear description of what is being measured within each study was required. It is recommended that range of motion measuring and reporting for Dupuytren’s disease requires consistency to address issues that fall into 3 main categories:- Definition of terms Protocol statement Outcome reportin

    Mutability and Importance of a Hypermutable Cell Subpopulation that Produces Stress-Induced Mutants in Escherichia coli

    Get PDF
    In bacterial, yeast, and human cells, stress-induced mutation mechanisms are induced in growth-limiting environments and produce non-adaptive and adaptive mutations. These mechanisms may accelerate evolution specifically when cells are maladapted to their environments, i.e., when they are are stressed. One mechanism of stress-induced mutagenesis in Escherichia coli occurs by error-prone DNA double-strand break (DSB) repair. This mechanism was linked previously to a differentiated subpopulation of cells with a transiently elevated mutation rate, a hypermutable cell subpopulation (HMS). The HMS could be important, producing essentially all stress-induced mutants. Alternatively, the HMS was proposed to produce only a minority of stress-induced mutants, i.e., it was proposed to be peripheral. We characterize three aspects of the HMS. First, using improved mutation-detection methods, we estimate the number of mutations per genome of HMS-derived cells and find that it is compatible with fitness after the HMS state. This implies that these mutants are not necessarily an evolutionary dead end, and could contribute to adaptive evolution. Second, we show that stress-induced Lac+ mutants, with and without evidence of descent from the HMS, have similar Lac+ mutation sequences. This provides evidence that HMS-descended and most stress-induced mutants form via a common mechanism. Third, mutation-stimulating DSBs introduced via I-SceI endonuclease in vivo do not promote Lac+ mutation independently of the HMS. This and the previous finding support the hypothesis that the HMS underlies most stress-induced mutants, not just a minority of them, i.e., it is important. We consider a model in which HMS differentiation is controlled by stress responses. Differentiation of an HMS potentially limits the risks of mutagenesis in cell clones

    Aberrant Epigenetic Silencing Is Triggered by a Transient Reduction in Gene Expression

    Get PDF
    Aberrant epigenetic silencing plays a major role in cancer formation by inactivating tumor suppressor genes. While the endpoints of aberrant silencing are known, i.e., promoter region DNA methylation and altered histone modifications, the triggers of silencing are not known. We used the tet-off system to test the hypothesis that a transient reduction in gene expression will sensitize a promoter to undergo epigenetic silencing.The tet responsive promoter (P(TRE)) was used to drive expression of the selectable human HPRT cDNA in independent transfectants of an Hprt deficient mouse cell line. In this system, high basal HPRT expression is greatly reduced when doxycycline (Dox) is added to the culture medium. Exposure of the P(TRE)-HPRT transfectants to Dox induced HPRT deficient clones in a time dependent manner. A molecular analysis demonstrated promoter region DNA methylation, loss of histone modifications associated with expression (i.e., H3 lysine 9 and 14 acetylation and lysine 4 methylation), and acquisition of the repressive histone modification H3 lysine 9 methylation. These changes, which are consistent with aberrant epigenetic silencing, were not present in the Dox-treated cultures, with the exception of reduced H3 lysine 14 acetylation. Silenced alleles readily reactivated spontaneously or after treatment of cells with inhibitors of histone deacetylation and/or DNA methylation, but re-silencing of reactivated alleles did not require a new round of Dox exposure. Inhibition of histone deacetylation inhibited both the induction of silencing and re-silencing, whereas inhibition of DNA methylation had no such effect.This study demonstrates that a transient reduction in gene expression triggers a pathway for aberrant silencing in mammalian cells and identifies histone deacetylation as a critical early step in this process. DNA methylation, in contrast, is a secondary step in the silencing pathway under study. A model to explain these observations is offered

    Design and in vitro studies of a needle-type glucose sensor for subcutaneous monitoring

    Get PDF
    International audienceA new miniaturized glucose oxidase based needle-type glu¬ cose mlcrosensor has been developed for subcutaneous glu¬ cose monitoring. The sensor Is equivalent In shape and size to a 26-gauge needle (0.45-mm o.d.) and can be Implanted with ease without any Incision. The novel configuration greatly facilitates the deposition of enzyme and polymer films so that sensors with characteristics suitable for In vivo use (upper limit of linear range > 15 mM, response time 60%). The sensor response is largely Independent of ox¬ ygen tension In the normal physiological range. It also ex¬ hibits good selectivity against common interferences except for the exogenous drug acetaminophen

    A Microhomology-Mediated Break-Induced Replication Model for the Origin of Human Copy Number Variation

    Get PDF
    Chromosome structural changes with nonrecurrent endpoints associated with genomic disorders offer windows into the mechanism of origin of copy number variation (CNV). A recent report of nonrecurrent duplications associated with Pelizaeus-Merzbacher disease identified three distinctive characteristics. First, the majority of events can be seen to be complex, showing discontinuous duplications mixed with deletions, inverted duplications, and triplications. Second, junctions at endpoints show microhomology of 2–5 base pairs (bp). Third, endpoints occur near pre-existing low copy repeats (LCRs). Using these observations and evidence from DNA repair in other organisms, we derive a model of microhomology-mediated break-induced replication (MMBIR) for the origin of CNV and, ultimately, of LCRs. We propose that breakage of replication forks in stressed cells that are deficient in homologous recombination induces an aberrant repair process with features of break-induced replication (BIR). Under these circumstances, single-strand 3′ tails from broken replication forks will anneal with microhomology on any single-stranded DNA nearby, priming low-processivity polymerization with multiple template switches generating complex rearrangements, and eventual re-establishment of processive replication
    corecore