238 research outputs found
Analysis on the hull girder ultimate strength of a bulk carrier using simplified method based on an incremental-iterative approach
The hull girder ultimate strength of a typical bulk carrier is analyzed using a simplified method based on an incremental-iterative approach. First, vertical bending moment is examined by seven different methods. The moment versus curvature curves and the values of the ultimate longitudinal moments at collapse states are determined for both hogging and sagging cases. Second, the ultimate strength under coupled vertical and horizontal bending moment is accounted. An interaction curve is obtained, which corresponds to the results of series of calculation for the ship hull subject to bending conditions with different angles of curvature. It is found that the interaction curve is asymmetrical because the hull cross section is not symmetrical with respect to the horizontal axis and the structural response of the elements under compression is different from that under tension due to nonlinearity caused by buckling. The angles of the resultant bending moment vector and that of the curvature vector are different in investigated cases. The interaction design equations proposed by other researches are also addressed to discuss the results presented by this study
Steel-concrete connections for floating wave energy converters
In order to make wave power technologies competitive within the overall energy market, there needs to be significant reductions in the levelised cost of energy (LCoE). One area for potential cost reduction is the use of cheaper materials that are suitable for use in the harsh marine environment, such as reinforced concrete, which gives good corrosion and fatigue properties while providing excellent strength and stiffness at low unit cost. Concrete has the potential to be used for a wide range of wave energy device configurations, however in general use has been limited to nearshore fixed bottom wave energy converters. To date, no dynamic floating wave energy devices have successfully utilised reinforced concrete as structural material, mainly due to the uncertainty surrounding the behaviour of critical dynamic connections between concrete sections and other materials. This paper explores the main issues surrounding steel-concrete connections for floating wave energy converters, providing a review of available design options and standards and assessing the applicability of these to WECs. A methodology is proposed for the evaluation of connection options, and a case study of the Squid 12S floating WEC (developed by Albatern) is presented.This work has been carried out as part of the IDCORE programme, funded by the Energy Technology Institute and RCUK Energy programme (grant no. EP/J500847/1
Wave-current interactions in marine current turbines
The influence of waves on the dynamic properties of bending moments at the root of blades of tidal stream vertical-axis rotors is reported. Blade element-momentum theory for wind turbines is combined with linear wave theory and used to analyze this influence. Experiments were carried out with a 350 mm diameter rotor to validate the simulation and the comparison shows the ability of the theoretical approach to predict the blade root bending moments. It can be concluded that, in steep waves, linear theory underestimates the dynamic behaviour of bending moments. However, in long waves, linear theory works well. Bending moments at roots of rotor blades fluctuate with significant amplitudes (as much as 50 per cent of mean value for out-of-plane bending moment and 100 per cent of mean value for in-plane bending moment), which will be important for design of tidal stream rotors
An electrochromic ionic liquid: design, characterisation and performance in a solid state platform
This work describes the synthesis and characteristics of a novel electrochromic ionic liquid (IL) based on a phosphonium core tethered to a viologen moiety. When integrated into a solid-state electrochromic platform, the viologen modified IL behaved as both the electrolyte and the electrochromic material. Platform fabrication was achieved through in situ photo-polymerisation and encapsulation of this novel IL within a hybrid sol-gel. Important parameters of the platform performance, including its coloration efficiency, switching kinetics and optical properties were characterised using UV/Vis spectroscopy and cyclic voltammetry in tandem. The electrochromic platform exhibits a coloration efficiency of 10.72 cm2C-1, and a varied optical output as a function of the incident current. Despite the rather viscous nature of the material, the platform exhibited approximately two orders of magnitude faster switching kinetics (221 seconds to reach 95 % absorbance) when compared to previously reported electrochromic ILs (18,000 seconds)
Gold Nanoparticle-Based Surface-Enhanced Raman Scattering for Noninvasive Molecular Probing of Embryonic Stem Cell Differentiation
This study reports the use of gold nanoparticle-based surface-enhanced Raman scattering (SERS) for probing the differentiation of mouse embryonic stem (mES) cells, including undifferentiated single cells, embryoid bodies (EBs), and terminally differentiated cardiomyocytes. Gold nanoparticles (GNPs) were successfully delivered into all 3 mES cell differentiation stages without affecting cell viability or proliferation. Transmission electron microscopy (TEM) confirmed the localization of GNPs inside the following cell organelles: mitochondria, secondary lysosome, and endoplasmic reticulum. Using bright- and dark-field imaging, the bright scattering of GNPs and nanoaggregates in all 3 ES cell differentiation stages could be visualized. EB (an early differentiation stage) and terminally differentiated cardiomyocytes both showed SERS peaks specific to metabolic activity in the mitochondria and to protein translation (amide I, amide II, and amide III peaks). These peaks have been rarely identified in undifferentiated single ES cells. Spatiotemporal changes observed in the SERS spectra from terminally differentiated cardiomyocyte tissues revealed local and dynamic molecular interactions as well as transformations during ES cell differentiation
The evolution of fetal protection policies
This article examines the evolution of fetal protection policies (FPPs) by detailing their historical legacy and a range of contemporary social forces that have contributed to their maintenance. It is based on a case study of the 1977 U.S. Department of Labor, Occupational Safety and Health Administration (OSHA) hearings to revise the industrial lead standard, the 1991 U.S. Supreme Court decision that such policies are unconstitutional ( United Auto Workers v. Johnson Controls , 1991), and the case law preceding that decision. A primary issue is the notion that women and fetuses are disproportionately susceptible to lead. This study reveals the ways in which this belief is framed, disputed, and appropriated by various parties to the fetal protection policy debate. Implications of this case study for family health policy are also discussed.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/44656/1/10834_2006_Article_BF02353687.pd
- …