Shear Bond Strength of Nanohybrid Composite to the Resin Matrix Ceramics After Different Surface Treatments.

OBJECTIVE: The purpose of this study was to evaluate the effects of different surface treatments on the shear bond strength (SBS) of a composite resin to the various resin matrix ceramics (RMC). BACKGROUND: Clinical applications of physical and chemical surface conditioning methods may be required for RMC to optimize the adhesion of additional resin materials. MATERIALS AND METHODS: Ninety-nine RMC specimens (6 × 6 × 2 mm) were prepared from a resin nanoceramic (RNC), a polymer-infiltrated hybrid ceramic (PIHC), and a flexible hybrid ceramic (FHC) block with a cutting machine under copious water. All specimens divided randomly into three surface treatment subgroups (n = 11): (1) untreated (Cnt), (2) tribochemical silica coated (Tbc), and (3) neodymium-doped yttrium aluminum garnet (Nd:YAG) laser irradiated with 3 W (150 mJ/pulse, 20 Hz) for 20 sec. A nanohybrid composite resin was layered with a disc-shape mold (2 × 3 mm) onto the ceramics and submitted to thermal cycling (3000 cycles, 5-55°C). The SBS test of specimens was performed using a universal testing machine. Data were statistically analyzed with two-way analysis of variance (ANOVA) and Tukey HSD test (α = 0.05). RESULTS: The type of RMC, surface treatments, and their interactions was statistically significant on SBS, according to the ANOVA (p < 0.05). Both the Tbc and Lsr surface treatments significantly increased the SBS values of FHC (p < 0.001), while significant increases were observed only for Lsr0applied RNC and Tbc applied PIHC groups (p < 0.001). CONCLUSIONS: The tribochemical silica coating and laser irradiation techniques may be suitable for improving the surface topography of specific types of RMC. While the same surface treatment technique may not provide similar successful results for all types of RMC, it is recommended to choose the most effective and reliable technique for clinical application

Effect of surface treatments on the bond strength of indirect resin composite to resin matrix ceramics.

PURPOSE: The purpose of this study was to evaluate the shear bond strength (SBS) of an indirect resin composite (IRC) to the various resin matrix ceramic (RMC) blocks using different surface treatments. MATERIALS AND METHODS: Ninety-nine cubic RMC specimens consisting of a resin nanoceramic (RNC), a polymer-infiltrated hybrid ceramic (PIHC), and a flexible hybrid ceramic (FHC) were divided randomly into three surface treatment subgroups (n = 11). In the experimental groups, untreated (Cnt), tribochemical silica coating (Tbc), and Neodymium-Doped Yttrium Aluminum Garnet (Nd:YAG) laser irradiation (Lsr) with 3 W (150 mJ/pulse, 20 Hz for 20 sec.) were used as surface treatments. An indirect composite resin (IRC) was layered with a disc-shape mold (2 × 3 mm) onto the treated-ceramic surfaces and the specimens submitted to thermal cycling (6000 cycles, 5 - 55℃). The SBS test of specimens was performed using a universal testing machine and the specimens were examined with a scanning electron microscope to determine the failure mode. Data were statistically analyzed with two-way analysis of variance (ANOVA) and Tukey HSD test (α=.05). RESULTS: According to the two-way ANOVA, only the surface treatment parameter was statistically significant (P<.05) on the SBS of IRC to RMC. The SBS values of Lsr-applied RMC groups were significantly higher than Cnt groups for each RMC material, (P<.05). Significant differences were also determined between Tbc surface treatment applied and untreated (Cnt) PIHC materials (P=.039). CONCLUSION: For promoting a reliable bond strength during characterization of RMC with IRC, Nd:YAG laser or Tbc surface treatment technique should be used, putting in consideration the microstructure and composition of RMC materials and appropriate parameters for each material

Clinical factors affecting the translucency of monolithic Y-TZP ceramics

The use of monolithic yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) ceramics in aesthetically critical regions is questionable because of the insufficient translucency and opacity of the restorations. Intrinsic (manufacturing process) and extrinsic factors (laboratory procedures and clinical factors) can affect the translucency of monolithic zirconia. In this narrative review, the clinical factors (thickness, cementation type, colour of the monolithic zirconia, surface finishing methods and wear, dental background, cement colour, low temperature degradation) affecting the translucency of monolithic Y-TZP ceramics were reported