Exploring the job-shop search space with genetic algorithms

Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1997.Includes bibliographical references (leaves 52-53).by Steven E. Czerwinski.M.Eng

MesonNet Workshop on Meson Transition Form Factors

The mini-proceedings of the Workshop on Meson Transition Form Factors held in Cracow from May 29th to 30th, 2012 introduce the meson transition form factor project with special emphasis on the interrelations between the various form factors (on-shell, single off-shell, double off-shell). Short summaries of the talks presented at the workshop follow.Comment: 69 pages, 14 figures; all talks can be found at https://sites.google.com/site/mesonnetwork/home/activities/form-factor-workshop-2012; v2: workshop link updated (as the page had to be moved to a commercial server), table 6 correcte

Continuous twin screw rheo-extrusion of an AZ91D magnesium alloy

© The Minerals, Metals & Materials Society and ASM International 2012The twin screw rheo-extrusion (TSRE) is designed to take advantage of the nondendritc microstructure and thixotropic characterization of semisolid-metal slurries and produce simple metal profiles directly from melts. The extrusion equipment consists of a rotor-stator high shear slurry maker, a twin screw extruder, and a die assembly. The process is continuous and has a potential for significantly saving energy, manufacturing cost, and enhancing efficiency. The present investigation was carried out to study the process performance for processing rods of an AZ91D magnesium alloy and the microstructure evolution during processing. The semisolid slurry prepared by the process was characterized by uniformly distributed nondendritic granular primary phase particles. AZ91D rods with uniform and fine microstructures and moderate mechanical properties were produced. For the given slurry making parameters, decreasing extrusion temperature was found to improve microstructures and properties. The mechanisms of particle granulation and refinement and the effect of processing parameters on process performance and thermal management are discussed. © 2012 The Minerals, Metals & Materials Society and ASM International.EPSRC (UK) and Rautomead Lt

Kaon physics with the KLOE detector

In this paper we discuss the recent finalized analyses by the KLOE experiment at DA$\Phi$NE: the CPT and Lorentz invariance test with entangled $K^0 \bar{K}^0$ pairs, and the precision measurement of the branching fraction of the decay ${ K^+} \rightarrow \pi^+\pi^-\pi^+(\gamma)$. We also present the status of an ongoing analysis aiming to precisely measure the $K^{\pm}$ mass

First measurement of the K−n →Λπ−non-resonant transition amplitude below threshold

We present the analysis of K−absorption processes on He4 leading to Λπ−final states, measured with the KLOE spectrometer at the DAΦNE e+e−collider and extract, for the first time, the modulus of the non-resonant K−n →Λπ−direct production amplitude about 33 MeV below the K‾N threshold. This analysis also allows to disentangle the K−nuclear absorption at-rest from the in-flight capture, for K−momenta of about 120 MeV. The data are interpreted with the help of a phenomenological model, and the modulus of the non-resonant K−n →Λπ−amplitude for K−absorption at-rest is found to be |AK−n→Λπ−|=(0.334±0.018stat−0.058+0.034syst)fm

Novel method for hit-position reconstruction using voltage signals in plastic scintillators and its application to Positron Emission Tomography

Currently inorganic scintillator detectors are used in all commercial Time of Flight Positron Emission Tomograph (TOF-PET) devices. The J-PET collaboration investigates a possibility of construction of a PET scanner from plastic scintillators which would allow for single bed imaging of the whole human body. This paper describes a novel method of hit-position reconstruction based on sampled signals and an example of an application of the method for a single module with a 30 cm long plastic strip, read out on both ends by Hamamatsu R4998 photomultipliers. The sampling scheme to generate a vector with samples of a PET event waveform with respect to four user-defined amplitudes is introduced. The experimental setup provides irradiation of a chosen position in the plastic scintillator strip with an annihilation gamma quanta of energy 511~keV. The statistical test for a multivariate normal (MVN) distribution of measured vectors at a given position is developed, and it is shown that signals sampled at four thresholds in a voltage domain are approximately normally distributed variables. With the presented method of a vector analysis made out of waveform samples acquired with four thresholds, we obtain a spatial resolution of about 1 cm and a timing resolution of about 80 p

Search for the 3He-eta bound state at COSY-11

We have measured excitation function for dp -> ppp_pi- reaction near the eta production threshold. We observe an enhancement of the counting rate above the threshold which can originate from the production of the eta meson in the reaction dp -> 3He eta and its subsequent absorption on neutron in the 3He nucleus leading to creation of the p_pi- pair.Comment: Presented at 10th International Workshop on Meson Production, Properties and Interaction (MESON 2008), Cracow, Poland, 6 - 10 June 2008, 4 pages, 4 figures,references adde

Promoting Bicycle Commuter Safety, Research Report 11-08

We present an overview of the risks associated with cycling to emphasize the need for safety. We focus on the application of frameworks from social psychology to education, one of the 5 Es—engineering, education, enforcement, encouragement, and evaluation. We use the structure of the 5 Es to organize information with particular attention to engineering and education in the literature review. Engineering is essential because the infrastructure is vital to protecting cyclists. Education is emphasized since the central focus of the report is safety