Turbojet engine blade damping

The potentials of various sources of nonaerodynamic damping in engine blading are evaluated through a combination of advanced analysis and testing. The sources studied include material hysteresis, dry friction at shroud and root disk interfaces as well as at platform type external dampers. A limited seris of tests was conducted to evaluate damping capacities of composite materials (B/AL, B/AL/Ti) and thermal barrier coatings. Further, basic experiments were performed on titanium specimens to establish the characteristics of sliding friction and to determine material damping constants J and n. All the tests were conducted on single blades. Mathematical models were develthe several mechanisms of damping. Procedures to apply this data to predict damping levels in an assembly of blades are developed and discussed

An experimental investigation of the structural dynamics of a torsionally soft rotor in vacuum

An extensive data base of structural dynamic characteristics has been generated from an experimental program conducted on a torsionally soft two-bladed model helicopter rotor system. Measurements of vibratory strains for five modes of vibration were made at twenty-one locations on the two blades at speeds varying from 0 to 1000 RPM and for several combinations of precone, droop and flexure stiffness. Tests were conducted in vacuum under carefully controlled conditions using a unique excitation device with a system of piezoelectric crystals bonded to the blade surface near the root. Frequencies, strain mode shapes and dampings are extracted from the time histories and can be used to validate structural dynamics codes. The dynamics of the system are such that there is a clear tendency for the first torsion and second flap modes to couple within the speed range considered. Strain mode shapes vary significantly with speed and configuration. This feature is important in the calcualtion of aeroelastic instabilities. The tension axis tests confirmed that the modulus-weighted centroid for the nonhomogeneous airfoil is slightly off the mass centroid and validated previous static tests done to determine location of the tension axis

Graphical explanation in an expert system for Space Station Freedom rack integration

The rationale and methodology used to incorporate graphics into explanations provided by an expert system for Space Station Freedom rack integration is examined. The rack integration task is typical of a class of constraint satisfaction problems for large programs where expertise from several areas is required. Graphically oriented approaches are used to explain the conclusions made by the system, the knowledge base content, and even at more abstract levels the control strategies employed by the system. The implemented architecture combines hypermedia and inference engine capabilities. The advantages of this architecture include: closer integration of user interface, explanation system, and knowledge base; the ability to embed links to deeper knowledge underlying the compiled knowledge used in the knowledge base; and allowing for more direct control of explanation depth and duration by the user. The graphical techniques employed range from simple statis presentation of schematics to dynamic creation of a series of pictures presented motion picture style. User models control the type, amount, and order of information presented

A knowledge-based approach to configuration layout, justification, and documentation

The design, development, and implementation is described of a prototype expert system which could aid designers and system engineers in the placement of racks aboard modules on Space Station Freedom. This type of problem is relevant to any program with multiple constraints and requirements demanding solutions which minimize usage of limited resources. This process is generally performed by a single, highly experienced engineer who integrates all the diverse mission requirements and limitations, and develops an overall technical solution which meets program and system requirements with minimal cost, weight, volume, power, etc. This system architect performs an intellectual integration process in which the underlying design rationale is often not fully documented. This is a situation which lends itself to an expert system solution for enhanced consistency, thoroughness, documentation, and change assessment capabilities

A Knowledge-Based Approach to Configuration Layout, Justification, and Documentation

The design, development, and implementation of a prototype expert system which could aid designers and system engineers in the placement of racks aboard modules on the Space Station Freedom are described. This type of problem is relevant to any program with multiple constraints and requirements demanding solutions which minimize usage of limited resources. This process is generally performed by a single, highly experienced engineer who integrates all the diverse mission requirements and limitations, and develops an overall technical solution which meets program and system requirements with minimal cost, weight, volume, power, etc. This system architect performs an intellectual integration process in which the underlying design rationale is often not fully documented. This is a situation which lends itself to an expert system solution for enhanced consistency, thoroughness, documentation, and change assessment capabilities

Report of the Beyond the MSSM Subgroup for the Tevatron Run II SUSY/Higgs Workshop

There are many low-energy models of supersymmetry breaking parameters which are motivated by theoretical and experimental considerations. Here, we discuss some of the lesser-known theories of low-energy supersymmetry, and outline their phenomenological consequences. In some cases, these theories have more gauge symmetry or particle content than the Minimal Supersymmetric Standard Model. In other cases, the parameters of the Lagrangian are unusual compared to commonly accepted norms (e.g., Wino LSP, heavy gluino LSP, light gluino, etc.). The phenomenology of supersymmetry varies greatly between the different models. Correspondingly, particular aspects of the detectors assume greater or lesser importance. Detection of supersymmetry and the determination of all parameters may well depend upon having the widest possible view of supersymmetry phenomenology.Comment: 78 pages, 49 figures, to appear in the Proceedings of the Tevatron Run II SUSY/Higgs Workshop. Editor: J. F. Gunion; BTMSSM Convenors: M. Chertok, H. Dreiner, G. Landsberg, J. F. Gunion, J.D. Well

Correlates of Complete Childhood Vaccination in East African Countries.

Despite the benefits of childhood vaccinations, vaccination rates in low-income countries (LICs) vary widely. Increasing coverage of vaccines to 90% in the poorest countries over the next 10 years has been estimated to prevent 426 million cases of illness and avert nearly 6.4 million childhood deaths worldwide. Consequently, we sought to provide a comprehensive examination of contemporary vaccination patterns in East Africa and to identify common and country-specific barriers to complete childhood vaccination. Using data from the Demographic and Health Surveys (DHS) for Burundi, Ethiopia, Kenya, Rwanda, Tanzania, and Uganda, we looked at the prevalence of complete vaccination for polio, measles, Bacillus Calmette-Guérin (BCG) and DTwPHibHep (DTP) as recommended by the WHO among children ages 12 to 23 months. We conducted multivariable logistic regression within each country to estimate associations between complete vaccination status and health care access and sociodemographic variables using backwards stepwise regression. Vaccination varied significantly by country. In all countries, the majority of children received at least one dose of a WHO recommended vaccine; however, in Ethiopia, Tanzania, and Uganda less than 50% of children received a complete schedule of recommended vaccines. Being delivered in a public or private institution compared with being delivered at home was associated with increased odds of complete vaccination status. Sociodemographic covariates were not consistently associated with complete vaccination status across countries. Although no consistent set of predictors accounted for complete vaccination status, we observed differences based on region and the location of delivery. These differences point to the need to examine the historical, political, and economic context of each country in order to maximize vaccination coverage. Vaccination against these childhood diseases is a critical step towards reaching the Millennium Development Goal of reducing under-five mortality by two-thirds by 2015 and thus should be a global priority

Challenging Perceptions of Disability through Performance Poetry Methods: The "Seen but Seldom Heard" Project.

This paper considers performance poetry as a method to explore lived experiences of disability. We discuss how poetic inquiry used within a participatory arts-based research framework can enable young people to collectively question society’s attitudes and actions towards disability. Poetry will be considered as a means to develop a more accessible and effective arena in which young people with direct experience of disability can be empowered to develop new skills that enable them to tell their own stories. Discussion of how this can challenge audiences to critically reflect upon their own perceptions of disability will also be developed