1,155 research outputs found
Research Notes: Histology of the Embryo Sac of Male Sterile ms1ms1 Soybeans
The fact that ms1ms1 plants in maturity ranges I to V were producing haploids, triploids, and even higher ploidy levels along with the predominant normal diploids, indicated the female gametophyte was at least occasionally functioning abnormally. Histological sections of 92 male sterile pistils from plants about Groups III and IV, indicated only about 28% of the ovules had a normal embryo sac, by our interpretation. The remainder most commonly had extra nuclei in the regions of the secondary nucleus (endosperm mother cell) and/or the egg apparatus
Research Notes: Progress in Obtaining Soybean Haploids 2n=20
Male sterility gene ms 1 from North Carolina was transferred to maturity groups I, II, and III over the last few years to facilitate the use in Wisconsin of the twinning and haploidy phenomena associated with ms1ms1 plants. In 1975 we had an extended fall growing season and seed was obtained from several hundred male sterile ms 1ms1 plants, representing maturity groups I, II, III, IV, and V. Honey bees were used as pollinators
Improved antimicrobial activity of nisin-incorporated polymer films by formulation change and addition of food grade chelator
Aims: The following polymers were developed: polyethylene (PE), a PE and polyethylene oxide (70% PE and 30% PEO; PE + PEO) blend, PE and nisin (PE + nisin), PE, nisin, and EDTA (PE + nisin + EDTA), and PE + PEO with nisin (PE + PEO + nisin).
Methods and Results: Of the polymers tested, PE and PE + PEO did not exhibit any antimicrobial activity against Brochothrix thermosphacta (BT); however, PE + nisin, PE + nisin + EDTA, and PE + PEO + nisin did. Beef surfaces were experimentally inoculated with 3·50 log10 cfu/cm2 of BT, vacuum packaged with each of the five polymers, and held at 4°C for 21 d. After 3 d at 4°C, BT was reduced \u3e 1·70 log10 by PE + nisin and \u3e 3·50 log10 with PE + nisin + EDTA or PE + PEO + nisin. By 21 d at 4°C, BT was reduced to 0·30 log10 cfu/cm2 when treated with PE + PEO + nisin.
Conclusions: It appears that PE + PEO + nisin or PE + nisin + EDTA were more effective for reducing BT, as compared to polymers composed of PE + nisin.
Significance and Impact of the Study: Nisin-incorporated polymers may control the growth of undesirable bacteria, thereby extending the shelf life and possibly enhancing the microbial safety of meats
Improved antimicrobial activity of nisin-incorporated polymer films by formulation change and addition of food grade chelator
Aims: The following polymers were developed: polyethylene (PE), a PE and polyethylene oxide (70% PE and 30% PEO; PE + PEO) blend, PE and nisin (PE + nisin), PE, nisin, and EDTA (PE + nisin + EDTA), and PE + PEO with nisin (PE + PEO + nisin).
Methods and Results: Of the polymers tested, PE and PE + PEO did not exhibit any antimicrobial activity against Brochothrix thermosphacta (BT); however, PE + nisin, PE + nisin + EDTA, and PE + PEO + nisin did. Beef surfaces were experimentally inoculated with 3·50 log10 cfu/cm2 of BT, vacuum packaged with each of the five polymers, and held at 4°C for 21 d. After 3 d at 4°C, BT was reduced \u3e 1·70 log10 by PE + nisin and \u3e 3·50 log10 with PE + nisin + EDTA or PE + PEO + nisin. By 21 d at 4°C, BT was reduced to 0·30 log10 cfu/cm2 when treated with PE + PEO + nisin.
Conclusions: It appears that PE + PEO + nisin or PE + nisin + EDTA were more effective for reducing BT, as compared to polymers composed of PE + nisin.
Significance and Impact of the Study: Nisin-incorporated polymers may control the growth of undesirable bacteria, thereby extending the shelf life and possibly enhancing the microbial safety of meats
Indoor Carbon Monoxide: A Case Study in England for Detection and Interventions to Reduce Population Exposure
Background. Potential exposure to carbon monoxide (CO) in private homes is largely unquantified. Aim. To estimate prevalence of potential exposure to CO in residential dwellings and describe associated interventions in an inner-city community. Methods. A housing association in London, Hackney Homes, began fitting CO alarms in the 22,831 local authority homes it is responsible for in January 2010. A gas engineer investigated each alarm activation and recorded the information on a standard form. We undertook a cross-sectional study of all 22,831 homes, using data from these forms. Descriptive analysis was performed, including incidence, monthly variation, cause of alarm activation, and actions taken. Results. Between November 2011 and April 2012, 106 incidents were reported. Of these, 34.6% identified an issue with a gas appliance, and 10.6% identified misuse of cooking methods as the cause of activation. Relevant interventions were put in place, including disconnection of the gas appliance and education around cooking methods. Discussion. Little is known about the burden of CO poisoning in residential dwellings. This study provides important information on the path to quantifying population exposure to CO as well as establishing a possible approach to access this key information and realistic interventions to reduce potential exposure
Research Notes: University of Wisconsin
Tissue culture methods may benefit soybean breeders if whole plants can be differentiated from aneuploid, mutated, fused, or haploid cells. However, in order to realize this potential, it must be possible to derive plantlets from previously undifferentiated tissues - and ultimately from masses of callus cells. This report summarizes the information we obtained concerning adventitious budding from soybean tissues (Kimball and Bingham, 1973), early stages of embryo formation within masses of callus cells, and actual differentiation of plantlets from callus tissue
Comparing index-based vulnerability assessments in the Mississippi Delta: Implications of contrasting theories, indicators, and aggregation methodologies
There are many index-based approaches for assessing vulnerability to socio-natural hazards with differences in underlying theory, indicator selection and aggregation methodology. Spatially explicit output scores depend on these characteristics and contrasting approaches can therefore lead to very different policy implications. These discrepancies call for more critical reflection on index design and utility, a discussion that has not kept pace with the impetus for vulnerability assessments and respective index creation and application following the Hyogo Framework for Action 2005–2015. Comparing index outputs is an effective approach in this regard. Here, the Social Vulnerability Index (SoVI®) and the vulnerability component of the Global Delta Risk Index (GDRI) are applied at census tract level in the Mississippi Delta and visually and quantitatively compared. While the SoVI® is grounded in the hazard/risk research paradigm with primarily socio-economic indicators and an inductive principal component methodology, the GDRI incorporates advancements from sustainability science with ecosystem-based indicators and a modular hierarchical design. Maps, class rank changes, and correlations are used to assess the convergence and divergence of these indexes across the delta. Results show that while very different theoretical frameworks influence scores through indicator selection, methodology of index calculation has an even greater effect on output. Within aggregative methodology, the treatment of inter-indicator correlation is decisive. Implications include the need for an increased focus on index methodology and validation of results, transparency, and critical reflection regarding assessment limitations, as our results imply that contradictory risk reduction policies could be considered depending on the assessment methodology used
Indoor Carbon Monoxide: A Case Study in England for Detection and Interventions to Reduce Population Exposure
Background. Potential exposure to carbon monoxide (CO) in private homes is largely unquantified. Aim. To estimate prevalence of potential exposure to CO in residential dwellings and describe associated interventions in an inner-city community. Methods. A housing association in London, Hackney Homes, began fitting CO alarms in the 22,831 local authority homes it is responsible for in January 2010. A gas engineer investigated each alarm activation and recorded the information on a standard form. We undertook a cross-sectional study of all 22,831 homes, using data from these forms. Descriptive analysis was performed, including incidence, monthly variation, cause of alarm activation, and actions taken. Results. Between November 2011 and April 2012, 106 incidents were reported. Of these, 34.6% identified an issue with a gas appliance, and 10.6% identified misuse of cooking methods as the cause of activation. Relevant interventions were put in place, including disconnection of the gas appliance and education around cooking methods. Discussion. Little is known about the burden of CO poisoning in residential dwellings. This study provides important information on the path to quantifying population exposure to CO as well as establishing a possible approach to access this key information and realistic interventions to reduce potential exposure
An intermediate-depth source of hydrothermal 3He and dissolved iron in the North Pacific
We observed large water column anomalies in helium isotopes and trace metal concentrations above the Loihi Seamount. The 3He/4He of the added helium was 27.3 times the atmospheric ratio, clearly marking its origin to a primitive mantle plume. The dissolved iron to 3He ratio (dFe:3He) exported to surrounding waters was 9.3 ± 0.3 × 106. We observed the Loihi 3He and dFe “signal” at a depth of 1100 m at several stations within ∼100 – 1000 km of Loihi, which exhibited a distal dFe:3He ratio of ∼4 × 106, about half the proximal ratio. These ratios were remarkably similar to those observed over and near the Southern East Pacific Rise (SEPR) despite greatly contrasting geochemical and volcanictectonic origins. In contrast, the proximal and distal dMn:3He ratios were both ∼ 1 × 106, less than half of that observed at the SEPR. Dissolved methane was minimally enriched in waters above Loihi Seamount and was distally absent. Using an idealized regional-scale model we replicated the historically observed regional 3He distribution, requiring a hydrothermal 3He source from Loihi of 10.4 ± 4.2 mola−1, ∼2% of the global abyssal hydrothermal 3He flux. From this we compute a corresponding dFe flux of ∼40 Mmola−1. Global circulation model simulations suggest that the Loihi-influenced waters eventually upwell along the west coast of North America, also extending into the shallow northwest Pacific, making it a possibly important determinant of marine primary production in the subpolar North Pacific
Mammography Facility Characteristics Associated With Interpretive Accuracy of Screening Mammography
BackgroundAlthough interpretive performance varies substantially among radiologists, such variation has not been examined among mammography facilities. Understanding sources of facility variation could become a foundation for improving interpretive performance.MethodsIn this cross-sectional study conducted between 1996 and 2002, we surveyed 53 facilities to evaluate associations between facility structure, interpretive process characteristics, and interpretive performance of screening mammography (ie, sensitivity, specificity, positive predictive value [PPV1], and the likelihood of cancer among women who were referred for biopsy [PPV2]). Measures of interpretive performance were ascertained prospectively from mammography interpretations and cancer data collected by the Breast Cancer Surveillance Consortium. Logistic regression and receiver operating characteristic (ROC) curve analyses estimated the association between facility characteristics and mammography interpretive performance or accuracy (area under the ROC curve [AUC]). All P values were two-sided.ResultsOf the 53 eligible facilities, data on 44 could be analyzed. These 44 facilities accounted for 484 463 screening mammograms performed on 237 669 women, of whom 2686 were diagnosed with breast cancer during follow-up. Among the 44 facilities, mean sensitivity was 79.6% (95% confidence interval [CI] = 74.3% to 84.9%), mean specificity was 90.2% (95% CI = 88.3% to 92.0%), mean PPV1 was 4.1% (95% CI = 3.5% to 4.7%), and mean PPV2 was 38.8% (95% CI = 32.6% to 45.0%). The facilities varied statistically significantly in specificity (P < .001), PPV1 (P < .001), and PPV2 (P = .002) but not in sensitivity (P = .99). AUC was higher among facilities that offered screening mammograms alone vs those that offered screening and diagnostic mammograms (0.943 vs 0.911, P = .006), had a breast imaging specialist interpreting mammograms vs not (0.932 vs 0.905, P = .004), did not perform double reading vs independent double reading vs consensus double reading (0.925 vs 0.915 vs 0.887, P = .034), or conducted audit reviews two or more times per year vs annually vs at an unknown frequency (0.929 vs 0.904 vs 0.900, P = .018).ConclusionMammography interpretive performance varies statistically significantly by facility
- …