1,300 research outputs found
Effects of wall compliance on the laminar–turbulent transition of torsional Couette flow
Torsional Couette flow between a rotating disk and a stationary wall is studied experimentally. The surface of the disk is either rigid or covered with a compliant coating. The influence of wall compliance on characteristic flow instabilities and on the laminar–turbulent flow transition is investigated. Data obtained from analysing flow visualizations are discussed. It is found that wall compliance favours two of the three characteristic wave patterns associated with the transition process and broadens the parameter regime in which these patterns are observed. The results for the effects of wall compliance on the third pattern are inconclusive. However, the experiments indicate that the third pattern is not a primary constituent of the laminar–turbulent transition process of torsional Couette flow
Switching a spin-valve back and forth by current-induced domain wall motion
We have studied the current-induced displacement of a domain wall (DW) in the
permalloy (Py) layer of a Co/Cu/Py spin valve structure at zero and very small
applied field. The displacement is in opposite direction for opposite dc
currents, and the current density required to move DW is only of the order of
10^6 A/cm^2. For H = 3 Oe, a back and forth DW motion between two stable
positions is observed. We also discuss the effect of an applied field on the DW
motion.Comment: 4 pages, 3 figure
Optimization of laser-plasma injector via beam loading effects using ionization-induced injection
Simulations of ionization induced injection in a laser driven plasma
wakefield show that high-quality electron injectors in the 50-200 MeV range can
be achieved in a gas cell with a tailored density profile. Using the PIC code
Warp with parameters close to existing experimental conditions, we show that
the concentration of in a hydrogen plasma with a tailored
density profile is an efficient parameter to tune electron beam properties
through the control of the interplay between beam loading effects and varying
accelerating field in the density profile. For a given laser plasma
configuration, with moderate normalized laser amplitude, and maximum
electron plasma density, , the
optimum concentration results in a robust configuration to generate electrons
at 150~MeV with a rms energy spread of 4\% and a spectral charge density of
1.8~pC/MeV.Comment: 13 pages, 10 figure
Phase diagram of silicon from atomistic simulations
In this letter we present a calculation of the temperature-pressure phase
diagram of Si in a range of pressures covering from -5 to 20 GPa and
temperatures up to the melting point. The phase boundaries and triple points
between the diamond, liquid, -Sn and clathrate phases are
reported. We have employed efficient simulation techniques to calculate free
energies and to numerically integrate the Clausius-Clapeyron equation, combined
with a tight binding model capable of an accuracy comparable to that of
first-principles methods. The resulting phase diagram agrees well with the
available experimental data.Comment: 5 pages, 1 figure, accepted in PR
Domain wall displacement by remote spin-current injection
We demonstrate numerically the ability to displace a magnetic domain wall by
a remote spin current injection. We consider a long and narrow magnetic
nanostripe with a single domain wall (DW). The spin-polarized current is
injected perpendicularly to the plane of the film (CPP) through a small
nanocontact which is located at certain distance from the domain wall initial
position. We show theoretically that the DW motion can be initiated not only by
conventional spin-transfer torque but also by indirect spin-torque, created by
a remote spin-current injection and then transferred to the DW by the
exchange-spring mechanism. An analytical description of this effect is
proposed. This finding may lead to a solution of bottleneck problems of DW
motion-based spintronic and neuromorphic devices with perpendicular
spin-current injection.Comment: 6 pages, 4 figure
Syracosphaera azureaplaneta sp. nov. and revision of Syracosphaera corolla Lecal, 1966
Here we show that the extant coccolithophore Syracosphaera corolla Lecal, 1966 comprises two consistently
different non-intergrading morphotypes characterised respectively by exothecal coccoliths with wide and
narrow central-areas. These are interpreted as separate species and so a new species is described, S. azureaplaneta,
and a revised description is given for S. corolla
The digital data processing concepts of the LOFT mission
The Large Observatory for X-ray Timing (LOFT) is one of the five mission
candidates that were considered by ESA for an M3 mission (with a launch
opportunity in 2022 - 2024). LOFT features two instruments: the Large Area
Detector (LAD) and the Wide Field Monitor (WFM). The LAD is a 10 m 2 -class
instrument with approximately 15 times the collecting area of the largest
timing mission so far (RXTE) for the first time combined with CCD-class
spectral resolution. The WFM will continuously monitor the sky and recognise
changes in source states, detect transient and bursting phenomena and will
allow the mission to respond to this. Observing the brightest X-ray sources
with the effective area of the LAD leads to enormous data rates that need to be
processed on several levels, filtered and compressed in real-time already on
board. The WFM data processing on the other hand puts rather low constraints on
the data rate but requires algorithms to find the photon interaction location
on the detector and then to deconvolve the detector image in order to obtain
the sky coordinates of observed transient sources. In the following, we want to
give an overview of the data handling concepts that were developed during the
study phase.Comment: Proc. SPIE 9144, Space Telescopes and Instrumentation 2014:
Ultraviolet to Gamma Ray, 91446
- …