129 research outputs found
Numerical and experimental characterization of a railroad switch machine
This contribution deals with the numerical and experimental characterization of the structural behavior of a railroad switch machine. Railroad switch machines must meet a number of safety-related conditions such as, for instance, exhibiting the appropriate resistance against any undesired movements of the points due to the extreme forces exerted by a passing train. This occurrence can produce very high stress on the components, which has to be predicted by designers. In order to assist them in the development of new machines and in defining what the critical components are, FEA models have been built and stresses have been calculated on the internal components of the switch machine. The results have been validated by means of an ad-hoc designed experimental apparatus, now installed at the facilities of the Department of Industrial Engineering of the University of Bologna. This apparatus is particularly novel and original, as no Standards are available that provide recommendations for its design, and no previous studies have dealt with the development of similar rigs. Moreover, it has wide potential applications for lab tests aimed at assessing the safety of railroad switch machines and the fulfilment of the specifications by many railway companies
On Hirth Ring Couplings: Design Principles Including the Effect of Friction
Rings with Hirth couplings are primarily used for the accurate positioning of axial-symmetric components in the machine tool industry and, generally, in mechanical components. It is also possible to use Hirth rings as connection tools. Specific industries with special milling and grinding machines are able to manufacture both tailor made and standard Hirth rings available on stock. Unfortunately, no international standard (for instance ISO, DIN or AGMA) is available for the production and the design of such components. In the best-case scenario, it is possible to find simplified design formulae in the catalogue of the suppliers. The aim of this work is to provide some accurate formulae and computational methods for design to provide better awareness on the limitations and the potential of this type of connection. The work consists of five parts: (i) a review of the base calculation derived mainly from the catalogues of manufacturers; (ii) an improved calculation based on a new analytical method including the friction phenomenon; (iii) an experimentation run for validating the method; (iv) a case study applied to a machine tool; and, (v) a closed form formulation to determine an upper threshold for friction, thus ensuring the Hirth coupling regular performance
A Practical Approach to Gear Design and Lubrication: A Review
The modern design of mechanical parts, such as gears, goes through the continuous demand for a high level of efficiency and reliability, as well as an increased load carrying capacity and endurance life. The aim of the present paper was to perform a review and to collect practical examples in order to provide interesting tips and guidelines for gear design, including both its dimensioning and its lubrication. From this point of view, this paper is particularly novel, as it is a full-comprehensive collection of all the tools supporting gear design. Several practical aspects have been taken into account, including the definition of the right profile shifting, the selection of a proper lubricant, and the definition of the quality grade and of the tolerances needed to obtain the correct backlash. Finally, a numerical example is provided, addressing the research of the best solution to fit a given space, while maximizing the transmittable torque over weight ratio for two mating spur gears
A methodology for the lightweight design of modern transfer machine tools
This paper deals with a modern design approach via finite elements in the definition of the main structural elements (rotary table and working unit) of an innovative family of transfer machine tools. Using the concepts of green design and manufacture, as well as sustainable development thinking, the paper highlights the advantages derived from their application in this specific field (i.e., the clever use of lightweight materials to allow ruling out high-consumption hydraulic pump systems). The design is conceived in a modular way, so that the final solution can cover transfers from four to 15 working stations. Two versions of the machines are examined. The first one has a rotary table with nine divisions, which can be considered as a prototype: this machine has been studied in order to set up the numerical predictive model, then validated by experimental tests. The second one, equipped with a rotary table with 15 divisions, is the biggest of the range: this machine has been entirely designed with the aid of the previously developed numerical model. The loading input forces for the analyses have been evaluated experimentally via drilling operations carried out on a three-axis CNC unit. The definition of the design force made it possible to accurately assess both the rotary table and the working units installed in the machine
INFLUENCE OF THE STIFFNESS AND FRICTIONAL CHARACTERISTICS ON THE SHANK TORQUE OF SCREWS IN BOLTED JOINTS
This work aims at determining the influence of tribological and stiffness characteristics of a bolted joint on the residual shank torque of the screw. Even if it is commonly accepted to consider such a residual torque equal to half the torque at the thread, the literature lacks experimental data about the topic. The residual shank torque combines with the axial preload and the external loads to bring about the overall stress on the screw. Hence, the higher the residual torque, the lower the admissible external load for given size and class of the screw. From there stems the need for an analytical tool allowing the designer to calculate the residual torque as a function of the key parameters of the joint
Influence of the orientation of steel parts produced by DMLS on the fatigue behaviour
© The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG 2020. The goal of this paper is to present studies of the influence of orientation of steel samples during additive manufacturing to their fatigue behaviour. The samples were produced from maraging steel EOS MS1 and stainless steel EOS PH1 using direct laser metal sintering technology. Three sets of samples were manufactured for each of the materials, with slopes of longitudinal axis of the samples being 0° (horizontal), 45° (slanted) and 90° (vertical) with respect to the horizontal building plane. All the samples were post-processed by heat treatment, shot-peening and machining, and tested according to the ISO 1143 standard. The curves for finite life domain were calculated using ISO 12107, and an estimation of the fatigue limit was made by Dixon-Mood method. The obtained results show that the building orientation has no significant influence on fatigue strength of maraging steel samples, while the stainless steel samples with slanted orientation of the axis have fatigue strength of up to 20% higher than the samples with horizontal or vertical orientation of the axis.The authors wish to acknowledge the support of European Commission through the project “Advanced design rules for optimal dynamic properties of additive manufacturing products – A_MADAM”, which has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 734455.The authors wish to acknowledge the support of European Commission through the project “Advanced design rules for optimal dynamic properties of additive manufacturing products – A_MADAM”, which has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 734455
Numerical and Experimental Characterization of a Railroad Switch Machine
This contribution deals with the numerical and experimental characterization of the structural behavior of a railroad switch machine. Railroad switch machines must meet a number of safety-related conditions such as, for instance, exhibiting the appropriate resistance against any undesired movements of the points due to the extreme forces exerted by a passing train. This occurrence can produce very high stress on the components, which has to be predicted by designers. In order to assist them in the development of new machines and in defining what the critical components are, FEA models have been built and stresses have been calculated on the internal components of the switch machine. The results have been validated by means of an ad-hoc designed experimental apparatus, now installed at the facilities of the Department of Industrial Engineering of the University of Bologna. This apparatus is particularly novel and original, as no Standards are available that provide recommendations for its design, and no previous studies have dealt with the development of similar rigs. Moreover, it has wide potential applications for lab tests aimed at assessing the safety of railroad switch machines and the fulfilment of the specifications by many railway companies
Fatigue response of as built DMLS processed Maraging Steel and effects of machining and heat and surface treatments
The main motivations for this study arise from the need for an assessment of the fatigue performance of DMLS produced Maraging Steel MS1, when it is used in the \u201cas fabricated\u201d state. The literature indicates a lack of knowledge from this point of view, moreover the great potentials of the additive process may be more and more incremented, if an easier and cheaper procedure could be used after the building stage. The topic has been tackled experimentally, investigating the impact of heat treatment, machining and micro-shot-peening on the fatigue strength with respect to the \u201cas built state\u201d. The results indicate that heat treatment significantly enhances the fatigue response, probably due to the relaxation of the post-process tensile residual stresses. Machining can also be effective, but it must be followed (not preceded) by micro-shot-peening, to benefit from the compressive residual stress state generated by the latter
- …