Molecular level structure of biodegradable poly(delta-valerolactone) obtained in the presence of boric acid

In this study, low molecular weight poly(δ-valerolactone) (PVL) was synthesized through bulk-ring openings polymerization of δ-valerolactone with boric acid (B(OH)₃) as a catalyst and benzyl alcohol (BnOH) as an initiator. The resulting homopolymer was characterized with the aid of nuclear magnetic resonance (NMR) and mass spectrometry (MS) techniques to gain further understanding of its molecular structure. The electrospray ionization mass spectrometry (ESI-MS) spectra of poly(δ-valerolactone) showed the presence of two types of homopolyester chains-one terminated by benzyl ester and hydroxyl end groups and one with carboxyl and hydroxyl end groups. Additionally, a small amount of cyclic PVL oligomers was identified. To confirm the structure of PVL oligomers obtained, fragmentation of sodium adducts of individual polyester molecules terminated by various end groups was explored in ESI-MSn by using collision induced dissociation (CID) techniques. The ESI-MSn analyses were conducted both in positive- and negative ion mode. The comparison of the fragmentation spectra obtained with proposed respective theoretical fragmentation pathways allowed the structure of the obtained oligomers to be established at the molecular level. Additionally, using matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF-MS), it was proven that regardless of the degree of oligomerization, the resulting PVL samples were a mixture of two types of linear PVL oligomers differing in end groups and containing just a small amount of cyclic oligomers that tended to be not visible at higher molar masses

Structural Architectural Features of Cyclodextrin Oligoesters Revealed by Fragmentation Mass Spectrometry Analysis

Cyclodextrins (CDs) were used in the present study for the ring-opening oligomerization (ROO) of l-lactide (LA) in order to synthesize biodegradable products with possible applications in pharmaceutical and medical fields. The practical importance of ROO reactions may reside in the possibility of synthesizing novel CD derivatives with high purity due to the dual role played by CDs, the role of the initiator through the hydroxylic groups, and the role of the catalyst by monomer inclusion in the CD cavity. The analyzed compounds were CDs modified with oligolactides obtained through ROO reactions of l-lactide in dimethylformamide. The resulting CD isomeric mixtures were investigated using classical characterization techniques such as gel permeation chromatography and nuclear magnetic resonance. Moreover, advanced mass spectrometry (MS) techniques were employed for the determination of the average number of monomer units attached to the cyclodextrin and the architecture of the derivatives (if the monomer units were attached as a single chain or as multiple chains). Thus, fragmentation studies effectuated on two different instruments (ESI Q-TOF and MALDI TOF) allowed us to correlate the size of the oligolactide chains attached to the CD with the observed fragmentation patterns

Structural Architectural Features of Cyclodextrin Oligoesters Revealed by Fragmentation Mass Spectrometry Analysis

Cyclodextrins (CDs) were used in the present study for the ring-opening oligomerization (ROO) of l-lactide (LA) in order to synthesize biodegradable products with possible applications in pharmaceutical and medical fields. The practical importance of ROO reactions may reside in the possibility of synthesizing novel CD derivatives with high purity due to the dual role played by CDs, the role of the initiator through the hydroxylic groups, and the role of the catalyst by monomer inclusion in the CD cavity. The analyzed compounds were CDs modified with oligolactides obtained through ROO reactions of l-lactide in dimethylformamide. The resulting CD isomeric mixtures were investigated using classical characterization techniques such as gel permeation chromatography and nuclear magnetic resonance. Moreover, advanced mass spectrometry (MS) techniques were employed for the determination of the average number of monomer units attached to the cyclodextrin and the architecture of the derivatives (if the monomer units were attached as a single chain or as multiple chains). Thus, fragmentation studies effectuated on two different instruments (ESI Q-TOF and MALDI TOF) allowed us to correlate the size of the oligolactide chains attached to the CD with the observed fragmentation patterns

Polyurethane Degradable Hydrogels Based on Cyclodextrin-Oligocaprolactone Derivatives

Polymer networks based on cyclodextrin and polyethylene glycol were prepared through polyaddition crosslinking using isophorone diisocyanate. The envisaged material properties are the hydrophilic character, specific to PEG and cyclodextrins, and the capacity to encapsulate guest molecules in the cyclodextrin cavity through physical interactions. The cyclodextrin was custom-modified with oligocaprolactone to endow the crosslinked material with a hydrolytically degradable character. SEM, DTG, and FTIR characterization methods have confirmed the morphology and structure of the prepared hydrogels. The influence of the crosslinking reaction feed was investigated through dynamic rheology. Further, thermal water swelling and hydrolytic degradation in basic conditions revealed the connectivity of the polymer network and the particular influence of the cyclodextrin amount in the crosslinking reaction feed on the material properties. Also, levofloxacin was employed as a model drug to investigate the drug loading and release capacity of the prepared hydrogels

Chitosan Grafted Poly (Ethylene Glycol) Methyl Ether Acrylate Particulate Hydrogels for Drug Delivery Applications

Chitosan (CS) crosslinking has been thoroughly investigated, but the chemical reactions leading to submicronic hydrogel formulations pose problems due to various physical/chemical interactions that limit chitosan processability. The current study employs the chemical modification of chitosan by Michael addition of poly (ethylene glycol) methyl ether acrylate (PEGA) to the amine groups to further prepare chitosan particulate hydrogels (CPH). Thus, modified CS is subjected to a double crosslinking, ionic and covalent, in water/oil emulsion. The studied process parameters are polymer concentration, stirring speed, and quantity of ionic crosslinker. The CPH were structurally and morphologically characterized through infrared spectroscopy, scanning electron microscopy, light scattering granulometry, and zeta potential, showing that modified CS allows better control of dimensional properties and morphology as compared with neat CS. Swelling properties were studied in acidic and neutral pH conditions, showing that pH-dependent behavior was maintained after grafting and double crosslinking. The applicability of the prepared materials was further tested for drug loading and in vitro delivery of levofloxacin (LEV), showing excellent capacity. CPH were found to be cyto- and hemocompatible demonstrating their potential for effective use as a controlled release system for different biomedical applications

Electrospinning of Cyclodextrin–Oligolactide Derivatives

The materials used for the preparation of electrospun mats exhibit a large variety. Among them, cyclodextrins (CDs) and their derivatives have received thorough attention. Herein, we focus on the preparation of electrospun fibers based on biodegradable cyclodextrin–oligolactide (CDLA) derivatives, which may be qualified as polymer-free cyclodextrin. CDLA was prepared by ring opening of L-lactide initiated by the β-cyclodextrin. A clear structural image of the high-purity CDLA product was proved by MALDI MS. Preparation of the electrospun mats was optimized by taking into consideration the electrospinning parameters such as applied voltage, needle-to-collector distance, flow rate, the concentration of cyclodextrin solutions, and solvent type. The obtained electrospun fibers were morphologically characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and small-angle X-ray scattering (SAXS). SEM allowed the optimization of the electrospinning process to obtain beadless fibers with submicronic diameters. Further analysis by TEM and SAXS revealed the inner structural features of the CDLA-based filaments. Our results showed that the high purity CDLA materials, structurally well-defined at the molecular level, are suitable for the preparation of electrospun mats by using dimethylformamide or a water/acetonitrile mixture as electrospinning solvents, similar to lower molecular weight commercial cyclodextrin derivatives

Cyclodextrin-Oligocaprolactone Derivatives—Synthesis and Advanced Structural Characterization by MALDI Mass Spectrometry

Cyclodextrins have previously been proven to be active in the catalysis of cyclic ester ring-opening reactions, hypothetically in a similar way to lipase-catalyzed reactions. However, the way they act remains unclear. Here, we focus on β-cyclodextrin’s involvement in the synthesis and characterization of β-cyclodextrin-oligocaprolactone (CDCL) products obtained via the organo-catalyzed ring-opening of ε-caprolactone. Previously, bulk or supercritical carbon dioxide polymerizations has led to inhomogeneous products. Our approach consists of solution polymerization (dimethyl sulfoxide and dimethylformamide) to obtain homogeneous CDCL derivatives with four monomer units on average. Oligomerization kinetics, performed by a matrix-assisted laser desorption ionization mass spectrometry (MALDI MS) optimized method in tandem with 1H NMR, revealed that monomer conversion occurs in two stages: first, the monomer is rapidly attached to the secondary OH groups of β-cyclodextrin and, secondly, the monomer conversion is slower with attachment to the primary OH groups. MALDI MS was further employed for the measurement of the ring-opening kinetics to establish the influence of the solvents as well as the effect of organocatalysts (4-dimethylaminopyridine and (–)-sparteine). Additionally, the mass spectrometry structural evaluation was further enhanced by fragmentation studies which confirmed the attachment of oligoesters to the cyclodextrin and the cleavage of dimethylformamide amide bonds during the ring-opening process

Polyethylene Glycol-Isophorone Diisocyanate Polyurethane Prepolymers Tailored Using MALDI MS

The reaction of diols with isocyanates, leading to mono-functional and di-functional prepolymers may be investigated using various characterization methods which show the overall conversion of isocyanate monomers. On the other hand, matrix-assisted laser desorption ionization mass spectrometry (MALDI MS) polymer characterization can be employed to identify the monomer units, the end-group functionalities, molecular weight averages, and to determine the copolymer sequence. Herein, we focus on prepolymer synthesis using isophorone diisocyanate (IPDI), a widely used diisocyanate for prepolymers preparation, especially in waterborne polyurethane materials. Thus, the reaction between polyethylene glycol diol and IPDI was in-depth investigated by mass spectrometry to determine the influence of the reaction parameters on the prepolymer’s structure. The relative content of the different functional oligomer species at given reaction times was determined in the reaction mixture. More specifically, the offline analysis revealed the influence of reaction parameters such as reaction temperature, the concentration of reactants, and the amount of dibutyltin dilaurate catalyst. The established MALDI MS analysis involved measurements of samples, first, directly collected from the reaction mixture and secondly, following derivatization with methanol. The obtained results revealed the effects of reaction parameters on the functionalization reaction with isocyanates, allowing to achieve a better reaction control

Cyclodextrins tethered with oligolactides – green synthesis and structural assessment

Biodegradable oligolactide derivatives based on α-, β- and γ-cyclodextrins (CDs) were synthesized by a green procedure in which CDs play the role of both the initiator and the catalyst. The synthetic procedure in which CDs and L-lactide (L-LA) are reacting in bulk at relatively high temperature of 110 °C was investigated considering the structural composition of the products. The obtained products were thoroughly characterized via mass spectrometry methods with soft ionization like matrix-assisted laser desorption ionization (MALDI) and electrospray ionization (ESI). Liquid chromatography (LC) separation with evaporative light scattering detection (ELSD) and NMR analysis were employed in order to elucidate the structural profiles of the obtained mixtures. The results clearly demonstrate that the cyclodextrins were tethered with more than one short oligolactate chain per CD molecule, predominantly at the methylene group, through ring opening of L-LA initiated by primary OH groups

Electrospinning of Cyclodextrin–Oligolactide Derivatives

The materials used for the preparation of electrospun mats exhibit a large variety. Among them, cyclodextrins (CDs) and their derivatives have received thorough attention. Herein, we focus on the preparation of electrospun fibers based on biodegradable cyclodextrin–oligolactide (CDLA) derivatives, which may be qualified as polymer-free cyclodextrin. CDLA was prepared by ring opening of L-lactide initiated by the β-cyclodextrin. A clear structural image of the high-purity CDLA product was proved by MALDI MS. Preparation of the electrospun mats was optimized by taking into consideration the electrospinning parameters such as applied voltage, needle-to-collector distance, flow rate, the concentration of cyclodextrin solutions, and solvent type. The obtained electrospun fibers were morphologically characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and small-angle X-ray scattering (SAXS). SEM allowed the optimization of the electrospinning process to obtain beadless fibers with submicronic diameters. Further analysis by TEM and SAXS revealed the inner structural features of the CDLA-based filaments. Our results showed that the high purity CDLA materials, structurally well-defined at the molecular level, are suitable for the preparation of electrospun mats by using dimethylformamide or a water/acetonitrile mixture as electrospinning solvents, similar to lower molecular weight commercial cyclodextrin derivatives