Selecting Metal Alloy Electric Contact Materials for MEMS Switches

This paper presents a method for selecting metal alloys as the electric contact materials for microelectromechanical systems (MEMS) metal contact switches. This procedure consists of reviewing macro-switch lessons learned, utilizing equilibrium binary alloy phase diagrams, obtaining thin film material properties and, based on a suitable model, predicting contact resistance performance. After determining a candidate alloy material, MEMS switches were designed, fabricated and tested to validate the alloy selection methodology. Minimum average contact resistance values of 1.17 and 1.87 Ω were measured for micro-switches with gold (Au) and gold–platinum (Au–(6.3%)Pt) alloy electric contacts, respectively. In addition, \u27hot-switched\u27 life cycle test results of 1.02 × 108 and 2.70 × 108 cycles were collected for micro-switches with Au and Au–(6.3%)Pt contacts, respectively. These results indicate increased wear with a small increase in contact resistance for MEMS switches with metal alloy electric contacts

Indirect Detection of Kaluza-Klein Dark Matter from Latticized Universal Dimensions

We consider Kaluza-Klein dark matter from latticized universal dimensions. We motivate and investigate two different lattice models, where the models differ in the choice of boundary conditions. The models reproduce relevant features of the continuum model for Kaluza-Klein dark matter. For the model with simple boundary conditions, this is the case even for a model with only a few lattice sites. We study the effects of the latticization on the differential flux of positrons from Kaluza-Klein dark matter annihilation in the galactic halo. We find that for different choices of the compactification radius, the differential positron flux rapidly converges to the continuum model results as a function of the number of lattice sites. In addition, we consider the prospects for upcoming space-based experiments such as PAMELA and AMS-02 to probe the latticization effect.Comment: 25 pages, 9 figures, LaTeX. Final version published in JCA

The Energy Spectra and Relative Abundances of Electrons and Positrons in the Galactic Cosmic Radiation

Observations of cosmic-ray electrons and positrons have been made with a new balloon-borne detector, HEAT (the "High-Energy Antimatter Telescope"), first flown in 1994 May from Fort Sumner, NM. We describe the instrumental approach and the data analysis procedures, and we present results from this flight. The measurement has provided a new determination of the individual energy spectra of electrons and positrons from 5 GeV to about 50 GeV, and of the combined "all-electron" intensity (e+ + e-) up to about 100 GeV. The single power-law spectral indices for electrons and positrons are alpha = 3.09 +/- 0.08 and 3.3 +/- 0.2, respectively. We find that a contribution from primary sources to the positron intensity in this energy region, if it exists, must be quite small.Comment: latex2e file, 30 pages, 15 figures, aas2pp4.sty and epsf.tex needed. To appear in May 10, 1998 issue of Ap.

Modeling Micro-Porous Surfaces for Secondary Electron Emission Control to Suppress Multipactor

This work seeks to understand how the topography of a surface can be engineered to control secondary electron emission (SEE) for multipactor suppression. Two unique, semi-empirical models for the secondary electron yield (SEY) of a micro-porous surface are derived and compared. The first model is based on a two-dimensional (2D) pore geometry. The second model is based on a three-dimensional (3D) pore geometry. The SEY of both models is shown to depend on two categories of surface parameters: chemistry and topography. An important parameter in these models is the probability of electron emissions to escape the surface pores. This probability is shown by both models to depend exclusively on the aspect ratio of the pore (the ratio of the pore height to the pore diameter). The increased accuracy of the 3D model (compared to the 2D model) results in lower electron escape probabilities with the greatest reductions occurring for aspect ratios less than two. In order to validate these models, a variety of micro-porous gold surfaces were designed and fabricated using photolithography and electroplating processes. The use of an additive metal-deposition process (instead of the more commonly used subtractive metal-etch process) provided geometrically ideal pores which were necessary to accurately assess the 2D and 3D models. Comparison of the experimentally measured SEY data with model predictions from both the 2D and 3D models illustrates the improved accuracy of the 3D model. For a micro-porous gold surface consisting of pores with aspect ratios of two and a 50% pore density, the 3D model predicts that the maximum total SEY will be one. This provides optimal engineered surface design objectives to pursue for multipactor suppression using gold surfaces

Kaluza-Klein Dark Matter, Electrons and Gamma Ray Telescopes

Kaluza-Klein dark matter particles can annihilate efficiently into electron-positron pairs, providing a discrete feature (a sharp edge) in the cosmic $e^+ e^-$ spectrum at an energy equal to the particle's mass (typically several hundred GeV to one TeV). Although this feature is probably beyond the reach of satellite or balloon-based cosmic ray experiments (those that distinguish the charge and mass of the primary particle), gamma ray telescopes may provide an alternative detection method. Designed to observe very high-energy gamma-rays, ACTs also observe the diffuse flux of electron-induced electromagnetic showers. The GLAST satellite, designed for gamma ray astronomy, will also observe any high energy showers (several hundred GeV and above) in its calorimeter. We show that high-significance detections of an electron-positron feature from Kaluza-Klein dark matter annihilations are possible with GLAST, and also with ACTs such as HESS, VERITAS or MAGIC.Comment: 10 pages, 2 figure

Supersymmetry and the positron excess in cosmic rays

Recently the HEAT balloon experiment has confirmed an excess of high-energy positrons in cosmic rays. They could come from annihilation of dark matter in the galactic halo. We discuss expectations for the positron signal in cosmic rays from the lightest superpartner. The simplest interpretations are incompatible with the size and shape of the excess if the relic LSPs evolved from thermal equilbrium. Non-thermal histories can describe a sufficient positron rate. Reproducing the energy spectrum is more challenging, but perhaps possible. The resulting light superpartner spectrum is compatible with collider physics, the muon anomalous magnetic moment, Z-pole electroweak data, and other dark matter searches.Comment: 4 pages, 2 figures, references added, minor wording change

Innovator resilience potential: A process perspective of individual resilience as influenced by innovation project termination

Innovation projects fail at an astonishing rate. Yet, the negative effects of innovation project failures on the team members of these projects have been largely neglected in research streams that deal with innovation project failures. After such setbacks, it is vital to maintain or even strengthen project members’ innovative capabilities for subsequent innovation projects. For this, the concept of resilience, i.e. project members’ potential to positively adjust (or even grow) after a setback such as an innovation project failure, is fundamental. We develop the second-order construct of innovator resilience potential, which consists of six components – self-efficacy, outcome expectancy, optimism, hope, self-esteem, and risk propensity – that are important for project members’ potential of innovative functioning in innovation projects subsequent to a failure. We illustrate our theoretical findings by means of a qualitative study of a terminated large-scale innovation project, and derive implications for research and management

Energy Spectra, Altitude Profiles and Charge Ratios of Atmospheric Muons

We present a new measurement of air shower muons made during atmospheric ascent of the High Energy Antimatter Telescope balloon experiment. The muon charge ratio mu+ / mu- is presented as a function of atmospheric depth in the momentum interval 0.3-0.9 GeV/c. The differential mu- momentum spectra are presented between 0.3 and about 50 GeV/c at atmospheric depths between 13 and 960 g/cm^2. We compare our measurements with other recent data and with Monte Carlo calculations of the same type as those used in predicting atmospheric neutrino fluxes. We find that our measured mu- fluxes are smaller than the predictions by as much as 70% at shallow atmospheric depths, by about 20% at the depth of shower maximum, and are in good agreement with the predictions at greater depths. We explore the consequences of this on the question of atmospheric neutrino production.Comment: 11 pages, 8 figures, to appear in Phys. Rev. D (2000