Out-of-plane in situ cyclic testing of unreinforced stone masonry walls with distributed loads

The present paper reports an in situ experimental test campaign carried out on existing buildings, in order to investigate the seismic behaviour of traditional masonry walls subject to out-of-plane loads. For the testing proposes, an experimental test setup based on a selfequilibrated scheme was developed and optimized to be applied in situ in two specimens on original and strengthened conditions. The obtained results are presented and carefully discussed namely from the reinforcement solutions’ efficiency point-of-view, as well as compared to previous experimental data obtained for the same type of masonry walls. Additionally, a simplified linearized displacement-based procedure was adapted in order to characterize the nonlinear force-displacement relationship for unreinforced traditional masonry walls and to analytically predict the experimental test results. The confrontation between the experimental and the analytical results are presented and discussed

Out-of-plane seismic response of stone masonry walls: experimental and analytical study of real piers

This paper presents the application of an existing simplified displacement-based procedure to the characterization of the nonlinear force-displacement relationship for the out-of-plane behaviour of unreinforced traditional masonry walls. According to this procedure, tri-linear models based on three different energy based criteria were constructed and confronted with three experimental tests on existing stone masonry constructions. Moreover, a brief introduction is presented regarding the main characteristics of the in situ cyclic testing recently carried out using distributed loads, as well as results obtained during the experimental campaigns performed. The comparison between the experimental and the analytical results are presented and discussed

Structural optimisation problem in support to building retrofitting decision

Various analysis methods, either linear elastic or non-linear, static or dynamic, are available for the performance analysis of existing buildings. Despite its advantages, it must be admitted that non-linear time history analysis can frequently become overly complex and impractical for general use as a first assessment. Simplified models, as the Capacity Spectrum Method, are frequently not able to accurately assess irregular structures. Considering these limitations, it is proposed and evaluated a simplified MDOF non-linear dynamic model, accounting for non-linear storey behaviour and storey damping. Based on the MDOF non-linear dynamic model, were developed optimization algorithms for the redesign of existing non-seismically designed structures. The optimization procedure searches for the optimum storey strengthening distribution (strength, stiffness or damping) in order to meet specific performance requirements, in terms of maximum inter-storey drift for a given seismic demand level. Numerical examples are presented in order to illustrate the capability of methodology

Tricriticality and Reentrance in a Naive Spin-Glass Model

In this paper a spin-1 spin-glass model under the presence of a uniform crystal field is investigated. It is shown that the model presents both continuous and first-order phase transition separated by a tricritical point. The phase diagram is obtained within the replica-symmetric solution and exhibits reentrance phenomena at low temperatures. Possibly it is the simplest model which can describe inverse freezing phenomena.Comment: 12 pages, 1 figur

Homological Domination in Large Random Simplicial Complexes

In this paper we state the homological domination principle for random multi-parameter simplicial complexes, claiming that the Betti number in one specific dimension (which is explicitly determined by the probability multi-parameter) significantly dominates the Betti numbers in all other dimensions. We also state and discuss evidence for two interesting conjectures which would imply a stronger version of the homological domination principle, namely that generically homology of a random simplicial complex coincides with that of a wedges of k-dimensional spheres. These two conjectures imply that under an additional assumption (specified in the paper) a random simplicial complex collapses to a k-dimensional complex homotopy equivalent to a wedge of spheres of dimension k.Comment: 8 pages, 1 figur

Viscous heating effects in fluids with temperature-dependent viscosity: triggering of secondary flows

Viscous heating can play an important role in the dynamics of fluids with strongly temperature-dependent viscosities because of the coupling between the energy and momentum equations. The heat generated by viscous friction produces a local temperature increase near the tube walls with a consequent decrease of the viscosity and a strong stratification in the viscosity profile. The problem of viscous heating in fluids was investigated and reviewed by Costa & Macedonio (2003) because of its important implications in the study of magma flows. Because of the strong coupling between viscosity and temperature, the temperature rise due to the viscous heating may trigger instabilities in the velocity field, which cannot be predicted by a simple isothermal Newtonian model. When viscous heating produces a pronounced peak in the temperature profile near the walls, a triggering of instabilities and a transition to secondary flows can occur because of the stratification in the viscosity profile. In this paper we focus on the thermal and mechanical effects caused by viscous heating. We will present the linear stability equations and we will show, as in certain regimes, these effects can trigger and sustain a particular class of secondary rotational flows which appear organised in coherent structures similar to roller vortices. This phenomenon can play a very important role in the dynamics of magma flows in conduits and lava flows in channels and, to our knowledge, it is the first time that it has been investigated by a direct numerical simulation.Comment: 18 pages manuscript, 10 figures, to be published in Journal of Fluid Mechanics (2005