Foams with enhanced ductility and impact behavior based on polypropylene composites

Producción CientíficaIn this work, formulations based on composites of a linear polypropylene (L-PP), a long-chain branched polypropylene (LCB-PP), a polypropylene–graft–maleic anhydride (PP-MA), a styrene-ethylene-butylene-styrene copolymer (SEBS), glass fibers (GF), and halloysite nanotubes (HNT-QM) have been foamed by using the improved compression molding route (ICM), obtaining relative densities of about 0.62. The combination of the inclusion of elastomer and rigid phases with the use of the LCB-PP led to foams with a better cellular structure, an improved ductility, and considerable values of the elastic modulus. Consequently, the produced foams presented simultaneously an excellent impact performance and a high stiffness with respect to their corresponding solid counterparts.Unión Europea (Evolution project under grant 314744)Ministerio de Ciencia, Innovación y Universidades - Fondo Europeo de Desarrollo Regional (project RTI2018-098749-B-I00)Junta de Castilla y Leon (project VA275P18

Morphological and Tribological Properties of PMMA/Halloysite Nanocomposites

From an environmental and cost-effective perspective, a number of research challenges can be found for electronics, household, but especially in the automotive polymer parts industry. Reducing synthesis steps, parts coating and painting, or other solvent-assisted processes, have been identified as major constrains for the existing technologies. Therefore, simple polymer processing routes (mixing, extrusion, injection moulding) were used for obtaining PMMA/HNT nanocomposites. By these techniques, an automotive-grade polymethylmethacrylate (PMMA) was modified with halloysite nanotubes (HNT) and an eco-friendly additive N,N′-ethylenebis(stearamide) (EBS) to improve nanomechanical properties involved in scratch resistance, mechanical properties (balance between tensile strength and impact resistance) without diminishing other properties. The relationship between morphological/structural (XRD, TEM, FTIR) and tribological (friction) properties of PMMA nanocomposites were investigated. A synergistic effect was found between HNT and EBS in the PMMA matrix. The synergy was attained by the phase distribution resulted from the selective interaction between partners and favourable processing conditions. Modification of HNT with EBS improved the dispersion of nanoparticles in the polymer matrix by increasing their interfacial compatibility through hydrogen bonding established by amide groups with aluminol groups. The increased interfacial adhesion further improved the nanocomposite scratch resistance. The PMMA/HNT-EBS nanocomposite had a lower coefficient of friction and lower scratch penetration depth than PMMA/HNT nanocomposite.Financial support by the EU Commission through Project H2020-686165-IZADINANO2INDUSTRY is gratefully acknowledged

The Effect of SEBS/Halloysite Masterbatch Obtained in Different Extrusion Conditions on the Properties of Hybrid Polypropylene/Glass Fiber Composites for Auto Parts

Masterbatches from a linear poly[styrene-b-(ethylene-co-butylene)-b-styrene] (SEBS) and halloysite nanotubes (HNT-QM) were obtained in different conditions of temperature and shear using two co-rotating twin-screw extruders. The influence of screw configuration and melt processing conditions on the morpho-structural, thermal and mechanical properties of masterbatches at macro and nanoscale was studied. A good dispersion of halloysite nanotubes and better thermal stability and tensile and nanomechanical properties were obtained at a lower temperature profile and higher screw speed. The effect of masterbatches, the best and worst alternatives, on the properties of a polypropylene (PP)–glass fiber (GF) composite was also evaluated. Double hardness, tensile strength and modulus and four times higher impact strength were obtained for PP/GF composites containing masterbatches compared to pristine PP. However, the masterbatch with the best properties led further to enhanced mechanical properties of the PP/GF composite. A clear difference between the effects of the two masterbatches was obtained by nanoindentation and nanoscratch tests. These analyses proved to be useful for the design of polymer composites for automotive parts, such as bumpers or door panels. This study demonstrated that setting-up the correct processing conditions is very important to obtain the desired properties for automotive applications

BETA-CATENIN – AN IMPORTANT IMMUNOHISTOCHEMICAL TOOL IN STRATIFYING ENDOMETRIAL CARCINOMAS?

Introduction. Recent research has demonstrated that the immunohistochemical nuclear -catenin expression is a valid surrogate for CTNNB1 exon 3 mutation in endometrial carcinomas (ECs). This mutation is an independent prognostic factor which identifies a subgroup of low-grade endometrial carcinomas that have a tendency for recurrence and worse prognosis. The objective of the study was to evaluate nuclear -catenin expression in different molecular subgroups of E Cs. Material and methods. We tested immunohistochemical nuclear -catenin expression in 50 cases of endometrial carcinomas diagnosed in two clinical institutions. Statistical analysis was performed between -catenin expression and various clinical, demographic, pathological and immunohistochemical parameters (age, myometrial invasion, FIGO grade, histopathological subtype, hormone receptors – ER, PR etc). Additionally, we analysed what molecular subgroup of ECs (MSS, MSI, p53wt, p53abn) revealed the most frequent cases with -catenin expression. Results. Our study indicated that ECs with nuclear -catenin positivity were observed in cases with higher FIGO grade (p=0.02), in endometrioid carcinomas (p=0.04) and in cases with lympho-vascular invasion (p=0.05). ER and PR were frequently expressed in the positive -catenin subgroup (p=0.03, p=0 .02). Our results show that ECs which express nuclear -catenin correlate with parameters that are already considered unfavourable. Conclusions. mmunohistochemical -catenin nuclear expression is an excellent replacement for the CTNNB1 exon 3 mutation in ECs and helps to stratify and predict prognosis in certain cases of ECs. We believe that future research will include this marker as part of the routine immunohistochemical panel for ECs

Stearic Acid/Layered Double Hydroxides Composite Thin Films Deposited by Combined Laser Techniques

We report on the investigation of stearic acid-layered double hydroxide (LDH) composite films, with controlled wettability capabilities, deposited by a combined pulsed laser deposition (PLD)-matrix-assisted pulsed laser evaporation (MAPLE) system. Two pulsed lasers working in IR or UV were used for experiments, allowing the use of proper deposition parameters (wavelength, laser fluence, repetition rate) for each organic and inorganic component material. We have studied the time stability and wettability properties of the films and we have seen that the morphology of the surface has a low effect on the wettability of the surfaces. The obtained composite films consist in stearic acid aggregates in LDH structure, exhibiting a shift to hydrophobicity after 36 months of storage

Preliminary Studies on Graphene-Reinforced 3D Products Obtained by the One-Stage Sacrificial Template Method for Bone Reconstruction Applications

The bone remodeling field has shifted focus towards the delineation of products with two main critical attributes: internal architectures capable to promote fast cell colonization and good mechanical performance. In this paper, Luffa-fibers and graphene nanoplatelets were proposed as porogen template and mechanical reinforcing agent, respectively, in view of framing 3D products by a one-stage polymer-free process. The ceramic matrix was prepared through a reproducible technology, developed for the conversion of marble resources into calcium phosphates (CaP) powders. After the graphene incorporation (by mechanical and ultrasonication mixing) into the CaP matrix, and Luffa-fibers addition, the samples were evaluated in both as-admixed and thermally-treated form (compact/porous products) by complementary structural, morphological, and compositional techniques. The results confirmed the benefits of the two agents’ addition upon the compact products’ micro-porosity and the global mechanical features, inferred by compressive strength and elastic modulus determinations. For the porous products, overall optimal results were obtained at a graphene amount of <1 wt.%. Further, no influence of graphene on fibers’ ability to generate at high temperatures internal interconnected-channels-arrays was depicted. Moreover, its incorporation led to a general preservation of structural composition and stability for both the as-admixed and thermally-treated products. The developed CaP-reinforced structures sustain the premises for prospective non- and load-bearing biomedical applications

The Nanomechanical and Tribological Properties of Polyamide/Hydrotalcite Nanocomposites

In specific fields of the industry (e.g., aircraft and automotive industry), plastic materials with high performance (improved scratch resistance, fire resistance, thermal stability, and high mechanical properties) are required. [...

The Effect of Graphene Nanoplatelets on the Properties of Hybrid Polyamide/Glass Fiber Composites

Currently, the method of solving the issues related to the environment has become a topic of great interest and is approached by researching several directions, such as recycling or the replacement of polluting materials [...

Scanning Electron Microscopy and Raman Spectroscopy Characterization of Structural Changes Induced by Thermal Treatment in Innovative Bio-Based Polyamide Nanocomposites

A comprehensive Raman scattering-based characterization of a full bio-based polyamide loaded with graphene nanoplatelets or layered double hydroxides (LDH) was assessed. The potential of the Raman spectroscopy was used to reveal several particularities of the nanocomposite structures induced by thermal treatment. Thus, a complete morpho-structural picture was obtained in combination with scanning electron microscopy (SEM) analysis of the neat polyamide and polyamide nanocomposites exposed at different thermal conditions (room temperature, 80 °C, and 145 °C). The analysis of G, D and 2D Raman peaks and their relative intensity ratio ID/IG, revealed the fact that the presence of graphene in polyamide is suitable for improving the essential physical properties and is also responsible for the decrease in the defects’ occurrence in the graphene layers. The surface of nanocomposites based on full bio-based polyamide, with different 2D fillers (graphenic and non-graphenic structures), was carefully evaluated before and after the thermal treatment by employing SEM and Raman analyses. The two thermal treatments allowed different chain mobility of the polymer (first temperature being over the polymer Tg and second one close to the melting phase in the viscoelastic stage). The spectroscopic and microscopic investigation was used to determine the conformational changes in filler aggregates and polymer surface, respectively