Instabilities encountered during heat transfer to a supercritical fluid

Investigation was made of the unstable behavior of a heat-transfer loop operating at a supercritical pressure. Natural convection operation of the loop, with observations on acoustic and slow oscillatory behavior, was emphasized during testing. The basic cause of both types of behavior appeared to originate in the heated boundary layer

Short-range Magnetic interactions in the Spin-Ice compound Ho2_{2}Ti2_{2}O7_{7}

Magnetization and susceptibility studies on single crystals of the pyrochlore Ho$_{2}$Ti$_{2}$O$_{7}$ are reported for the first time. Magnetization isotherms are shown to be qualitatively similar to that predicted by the nearest neighbor spin-ice model. Below the lock-in temperature, $T^{\ast }\simeq 1.97$ K, magnetization is consistent with the locking of spins along [111] directions in a specific two-spins-in, two-spins-out arrangement. Below $T^{\ast}$ the magnetization for $B||[111]$ displays a two step behavior signalling the breaking of the ice rules.Comment: 4 pages, 3 figure

The Role of Definitions in Biomedical Concept Representation

The Foundational Model (FM) of anatomy, developed as an anatomical enhancement of UMLS, classifies anatomical entities in a structural context. Explicit definitions have played a critical role in the establishment of FM classes. Essential structural properties that distinguish a group of anatomical entities serve as the differentiae for defining classes. These, as well as other structural attributes, are introduced as template slots in Protege, a frame-based knowledge acquisition system, and are inherited by descendants of the class. A set of desiderata has evolved during the instantiation of the FM for formulating definitions. We contend that 1. these desiderata generalize to non-anatomical domains and 2. satisfying them in constituent vocabularies of UMLS would enhance the quality of information retrievable through UMLS

A Survey of the Spacecraft Line-Of-Sight Jitter Problem

Predicting, managing, controlling, and testing spacecraft Line-of-Sight (LoS) jit- ter due to on-board internal disturbance sources is a challenging multi- disciplinary systems engineering problem, especially for those observatories hosting extremely sensitive optical sensor payloads with stringent requirements on allowable LoS jitter. Some specific spacecraft jitter engineering challenges will be introduced and described in this survey paper. Illustrative examples of missions where dynamic interactions have to be addressed to satisfy demanding payload instrument LoS jitter requirements will be provided. Some lessons learned and a set of recommended rules of thumb are also presented to provide guidance for analysts on where to initiate and how to approach a new spacecraft jitter design problem. These experience-based spacecraft jitter lessons learned and rules of thumb are provided in the hope they can be leveraged on new space system development projects to help overcome unfamiliarity with previously identified jitter technical pitfalls and challenges

Impact of pig slurry amendments on phosphorus, suspended sediment and metal losses in laboratory runoff boxes under simulated rainfall

peer-reviewedLosses of phosphorus (P) when pig slurry applications to land are followed by a rainfall event or losses from soils with high P contents can contribute to eutrophication of receiving waters. The addition of amendments to pig slurry spread on high P Index soils may reduce P and suspended sediment (SS) losses. This hypothesis was tested at laboratory-scale using runoff boxes under simulated rainfall conditions. Intact grassed soil samples, 100 cm-long, 22.5 cm-wide and 5 cm-deep, were placed in runoff boxes and pig slurry or amended pig slurry was applied to the soil surface. The amendments examined were: (1) commercial grade liquid alum (8% Al2O3) applied at a rate of 0.88:1 [Al:total phosphorus (TP)] (2) commercial-grade liquid ferric chloride (38% FeCl3) applied at a rate of 0.89:1 [Fe:TP] and (3) commercial-grade liquid poly-aluminium chloride (PAC) (10% Al2O3) applied at a rate of 0.72:1 [Al:TP]. The grassed soil was then subjected to three rainfall events (10.3 ± 0.15 mm h−1) at time intervals of 48, 72, and 96 h following slurry application. Each sod received rainfall on 3 occasions. Results across three rainfall events showed that for the control treatment, the average flow weighted mean concentration (FWMC) of TP was 0.61 mg L−1, of which 31% was particulate phosphorus (PP), and the average FWMC of SS was 38.1 mg L−1. For the slurry treatment, there was an average FWMC of 2.2 mg TP L−1, 47% of which was PP, and the average FWMC of SS was 71.5 mg L−1. Ranked in order of effectiveness from best to worst, PAC reduced the average FWMC of TP to 0.64 mg L−1 (42% PP), FeCl3 reduced TP to 0.91 mg L−1 (52% PP) and alum reduced TP to 1.08 mg L−1 (56% PP). The amendments were in the same order when ranked for effectiveness at reducing SS: PAC (74%), FeCl3 (66%) and alum (39%). Total phosphorus levels in runoff plots receiving amended slurry remained above those from soil only, indicating that, although incidental losses could be mitigated by chemical amendment, chronic losses from the high P index soil in the current study could not be reduced.The first author gratefully acknowledges the award of the EMBARK scholarship from IRCSET to support this study

Recent Experiences of the NASA Engineering and Safety Center (NESC) GN and C Technical Discipline Team (TDT)

The NASA Engineering and Safety Center (NESC), initially formed in 2003, is an independently funded NASA Program whose dedicated team of technical experts provides objective engineering and safety assessments of critical, high risk projects. The GN&C Technical Discipline Team (TDT) is one of fifteen such discipline-focused teams within the NESC organization. The TDT membership is composed of GN&C specialists from across NASA and its partner organizations in other government agencies, industry, national laboratories, and universities. This paper will briefly define the vision, mission, and purpose of the NESC organization. The role of the GN&C TDT will then be described in detail along with an overview of how this team operates and engages in its objective engineering and safety assessments of critical NASA projects. This paper will then describe selected recent experiences, over the period 2007 to present, of the GN&C TDT in which they directly performed or supported a wide variety of NESC assessments and consultations