Intermediate temperature solid oxide fuel cell/electrolyzer towards future large-scale production

n/

Fatigue life prediction of high strength steel welded joints by Energy Approach

AbstractTwo full-field techniques were applied for the study of the base material and welded specimens, made of S690QL steel: digital image correlation and thermographic techniques. Static and fatigue tests were carried out. The thermographic measurements can be used to predict the fatigue, with a great saving in time and effort. Fatigue tests at increasing loads were carried out by a stepwise succession, applied to the same specimen, for applying an energy-based approach. The predictions of the fatigue life, obtained by means of the Energy Approach, were compared with the values obtained by the traditional procedure

thermographic analysis during tensile tests and fatigue assessment of s355 steel

Abstract Structural S355 steel is widely applied in various sectors. Fatigue properties are of fundamental importance and extremely time consuming to be assessed. The aim of this research activity is to apply the Static Thermographic Method during tensile tests and correlate the temperature trend to the fatigue properties of the same steel. The Digital Image Correlation (DIC) and Infrared Thermography (IR) techniques have been used during all static tests. The Digital Image Correlation technique allowed the detection of displacements and strain, and so the evaluation of the mechanical properties of the material. Traditional fatigue tests were also performed in order to evaluate the stress-number of cycles to failure curve of the same steel. The value of the fatigue limit, obtained by the traditional procedure, was compared with the values predicted by means of the Static Thermographic Method (STM) obtained from tensile tests. The predicted values are in good agreement with the experimental values of fatigue life

Experimental investigation on Iroko wood used in shipbuilding

The paper deals with investigations about mechanical properties of Iroko, a hardwood species used for structures in shipbuilding as glued laminated timber. Experimental tests have been carried out to assess strength, stiffness and density of Iroko in accordance with current EN Standards. All the results obtained by tensile and three-point bending tests, along with the statistical analyses performed to define the characteristics values of some mechanical properties, are reported in the paper. These values allowed to assign the strength class, reported in EN 338 Standard, to the investigated Iroko wood population. The experiments have taken into account both solid timber strips and scarf-jointed strips, in order to evaluate the influence of such a type of joint, which is widely used in wooden shipbuilding on strength and stiffness. Eventually, peculiar investigations have been carried out to analyse the failure mode of some test pieces through special experimental techniques: three-dimensional computed tomography and infrared thermography

Fatigue assessment of Ti-6Al-4V titanium alloy laser welded joints in absence of filler material by means of full-field techniques

The aim of this research activity was to study the fatigue behavior of laser welded joints of titanium alloy, in which the welding was performed using a laser source and in the absence of filler material, by means of unconventional full field techniques: Digital Image Correlation (DIC), and Infrared Thermography (IRT). The DIC technique allowed evaluating the strain gradients around the welded zone. The IRT technique allowed analyzing the thermal evolution of the welded surface during all the fatigue tests. The fatigue limit estimated using the Thermographic Method corresponds with good approximation to the value obtained from the experimental fatigue tests. The obtained results provided useful information for the development of methods and models to predict the fatigue behavior of welded T-joints in titanium alloy

Predictive factors for lymph node involvement in sporadic medullary thyroid microcarcinoma: A systematic review

Objective: The aim of the study was to determine the impact of laboratory and imaging tests in predicting central and lateral neck lymph node/LN involvement and in decision making for surgical extent. Materials and Methods: A PubMed, Web of Science and Scopus search was performed according to PRISMA criteria. The relationship between nodule size, diagnostic biomarkers and imaging with LN involvement were evaluated. Results: The available data analysis did not yield clear indications of the relationship between each of these topics and the presence, number, and location of LN involved. There was no conclusive data for the selective indication of central neck dissection in the preoperative diagnosis of microMTC. Conclusions: There is no justification for less invasive interventions than total thyroidectomy with lymph node dissection

Modeling and experimental verification of an ultra-wide bandgap in 3D phononic crystal

This paper reports a comprehensive modeling and experimental characterization of a three-dimensional phononic crystal composed of a single material, endowed with an ultra-wide complete bandgap. The phononic band structure shows a gap-mid gap ratio of 132% that is by far the greatest full 3D bandgap in literature for any kind of phononic crystals. A prototype of the finite crystal structure has been manufactured in polyamide by means of additive manufacturing technology and tested to assess the transmission spectrum of the crystal. The transmission spectrum has been numerically calculated taking into account a frequency-dependent elastic modulus and a Rayleigh model for damping. The measured and numerical transmission spectra are in good agreement and present up to 75 dB of attenuation for a three-layer crystal

Interpretation of intraoperative parathyroid hormone monitoring according to the Rome criterion in primary hyperparathyroidism

Intraoperative parathyroid hormone dosage allows real-time monitoring of the decrease in PTH levels during parathyroidectomy and verify procedure’s efficacy. Currently, none of the interpretative criteria used has absolute accuracy. The aim of this study is to evaluate diagnostic accuracy of the Rome criterion verifying diagnostic significance of the individual assays. A total of 205 patients with primary hyperparathyroidism from a single adenoma were retrospectively evaluated and monitored with baseline PTH, PTH at 10 min and PTH at 20 min after adenoma excision. The accuracy of the latter two assays compared with baseline was compared by ROC curves. In addition, was evaluated the influence on these data of localization diagnostics (ultrasounds and scintigraphy), definitive histology, and type of surgery performed. The ratio of 20-min sampling to baseline in the Rome criterion showed highest diagnostic significance. This finding was not influenced by the type of surgery performed, definitive histologic examination, or intraoperative localization of the adenoma. The Rome criterion has shown its high reliability in detecting persistence. The ratio of sampling at 20 min to baseline is by far the best performing. Further studies are needed to evaluate whether sampling at 10 min after adenoma excision can be considered not mandatory

Study on Chinese Tourism Web Sites' Distribution and Online Marketing Effects.

As a platform and carrier of tourism information, tourism websites (TWs) and online tourism marketing have deeply affected the tourism industry. The authors adopt a geographical perspective to analyze the distribution of Chinese tourism websites (CTWs), and statistical analysis with SPSS16.0 was conducted to explore the online marketing effects of CTWs, and some meaningful results has been produced: 1) The number of CTWs generally decreases from eastern China to central and western China, and are especially dominant in tourism developed provinces. 2) The number of tourists has strong statistical correlation with the number of CTWs. 3) The strongest correlation for inbound tourists is with hotel websites, and the highest correlation coefficient is 0.807 between the number of domestic tourist and resort websites. Both inbound and domestic tourists have a low correlation coefficient with travel agency websites (TA). 4) There exist some statistical models between tourist numbers and different kinds of CTWs. The results clearly unveil the marketing effects and correlation of CTWs and is helpful for further online marketing strategies