Fabrication process development of SiC/superalloy composite sheet for exhaust system components

A chemical compatibility study was conducted between SiC filament and the following P/M matrix alloys: Waspaloy, Hastelloy-X, NiCrAlY, Ha-188, S-57, FeCrAlY, and Incoloy 800. None of the couples demonstrated sufficient chemical compatibility to withstand the minimum HIP consolidation temperatures (996 C) or intended application temperature of the composite (982 C). However, Waspaloy, Haynes 188, and Hastelloy-X were the least reactive with SiC of the candidate alloys. Chemical vapor deposited tungsten was shown to be an effective diffusion barrier between the superalloy matrix and SiC filament providing a defect-free coating of sufficient thickness. However, the coating breaks down when the tungsten is converted into intermetallic compounds by interdiffusion with matrix constituents. Waspaloy was demonstrated to be the most effective matrix alloy candidate in contact with the CVD tungsten barrier because of its relatively low growth rate constant of the intermediate compound and the lack of formation of Kirkendall voids at the matrix-barrier interface. Fabrication methods were developed for producing panels of uniaxial and angle ply composites utilizing CVD tungsten coated filament

Spin-orbit coupled j=1/2 iridium moments on the geometrically frustrated fcc lattice

Motivated by experiments on the double perovskites La2ZnIrO6 and La2MgIrO6, we study the magnetism of spin-orbit coupled j=1/2 iridium moments on the three-dimensional, geometrically frustrated, face-centered cubic lattice. The symmetry-allowed nearest-neighbor interaction includes Heisenberg, Kitaev, and symmetric off-diagonal exchange. A Luttinger-Tisza analysis shows a rich variety of orders, including collinear A-type antiferromagnetism, stripe order with moments along the [111]-direction, and incommensurate non-coplanar spirals, and we use Monte Carlo simulations to determine their magnetic ordering temperatures. We argue that existing thermodynamic data on these iridates underscores the presence of a dominant Kitaev exchange, and also suggest a resolution to the puzzle of why La2ZnIrO6 exhibits `weak' ferromagnetism, but La2MgIrO6 does not.Comment: 5 pages, 5 figs, significantly revised to address referee comments, to appear in PRB Rapid Com

Numerical investigation of gapped edge states in fractional quantum Hall-superconductor heterostructures

Fractional quantum Hall-superconductor heterostructures may provide a platform towards non-abelian topological modes beyond Majoranas. However their quantitative theoretical study remains extremely challenging. We propose and implement a numerical setup for studying edge states of fractional quantum Hall droplets with a superconducting instability. The fully gapped edges carry a topological degree of freedom that can encode quantum information protected against local perturbations. We simulate such a system numerically using exact diagonalization by restricting the calculation to the quasihole-subspace of a (time-reversal symmetric) bilayer fractional quantum Hall system of Laughlin $\nu=1/3$ states. We show that the edge ground states are permuted by spin-dependent flux insertion and demonstrate their fractional $6\pi$ Josephson effect, evidencing their topological nature and the Cooper pairing of fractionalized quasiparticles.Comment: 12 pages, 9 figure

Low Frequency Gravitational Waves from Black Hole MACHO Binaries

Nakamura, Sasaki, Tanaka, and Thorne have recently estimated the initial distribution of binary MACHOs in the galactic halo assuming that the MACHOs are primordial half solar mass black holes, and considered their coalescence as a possible source for ground-based interferometer gravitational wave detectors such as LIGO. Evolving their binary distribution forward in time to the present, the low-frequency (10^{-5} < f < 10^{-1} Hz) spectrum of gravitational waves associated with such a population of compact binaries is calculated. The resulting gravitational waves would form a strong stochastic background in proposed space interferometers such as LISA and OMEGA. Low frequency gravitational waves are likely to become a key tool for determining the properties of binaries within the dark MACHO population.Comment: 8 pages + 2 ps figures; AASTe

Ceramic regenerator systems development program

Ceramic regenerator cores are considered that can be used in passenger car gas turbine engines, Stirling engines, and industrial/truck gas turbine engines. Improved materials and design concepts aimed at reducing or eliminating chemical attack were placed on durability test in Ford 707 industrial gas turbine engines. The results of 19,600 hours of turbine engine durability testing are described. Two materials, aluminum silicate and magnesium aluminum silicate, continue to show promise toward achieving the durability objectives of this program. A regenerator core made from aluminum silicate showed minimal evidence of chemical attack damage after 6935 hours of engine test at 800 C and another showed little distress after 3510 hours at 982 C. Results obtained in ceramic material screening tests, aerothermodynamic performance tests, stress analysis, cost studies, and material specifications are also included

Biased random satisfiability problems: From easy to hard instances

In this paper we study biased random K-SAT problems in which each logical variable is negated with probability $p$. This generalization provides us a crossover from easy to hard problems and would help us in a better understanding of the typical complexity of random K-SAT problems. The exact solution of 1-SAT case is given. The critical point of K-SAT problems and results of replica method are derived in the replica symmetry framework. It is found that in this approximation $\alpha_c \propto p^{-(K-1)}$ for $p\to 0$. Solving numerically the survey propagation equations for K=3 we find that for $p<p^* \sim 0.17$ there is no replica symmetry breaking and still the SAT-UNSAT transition is discontinuous.Comment: 17 pages, 8 figure