High-frequency techniques for RCS prediction of plate geometries

The principal-plane scattering from perfectly conducting and coated strips and rectangular plates is examined. Previous reports have detailed Geometrical Theory of Diffraction/Uniform Theory of Diffraction (GTD/UTD) solutions for these geometries. The GTD/UTD solution for the perfectly conducting plate yields monostatic radar cross section (RCS) results that are nearly identical to measurements and results obtained using the Moment Method (MM) and the Extended Physical Theory of Diffraction (EPTD). This was demonstrated in previous reports. The previous analysis is extended to bistatic cases. GTD/UTD results for the principal-plane scattering from a perfectly conducting, infinite strip are compared to MM and EPTD data. A comprehensive overview of the advantages and disadvantages of the GTD/UTD and of the EPTD and a detailed analysis of the results from both methods are provided. Several previous reports also presented preliminary discussions and results for a GTD/UTD model of the RCS of a coated, rectangular plate. Several approximations for accounting for the finite coating thickness, plane-wave incidence, and far-field observation were discussed. Here, these approximations are replaced by a revised wedge diffraction coefficient that implicitly accounts for a coating on a perfect conductor, plane-wave incidence, and far-field observation. This coefficient is computationally more efficient than the previous diffraction coefficient because the number of Maliuzhinets functions that must be calculated using numerical integration is reduced by a factor of 2. The derivation and the revised coefficient are presented in detail for the hard polarization case. Computations and experimental data are also included. The soft polarization case is currently under investigation

Part A: Nonprincipal-plane scattering from flat plates: Second-order and corner diffractions

Two models of a flat plate for nonprincipal-plane scattering are explored. The first is a revised version of the Physical Optics/Physical Theory of Diffraction (PO/PTD) model with second-order PTD equivalent currents included to account for second-order interactions among the plate edges. The second model uses a heurisitcally derived corner diffraction coefficient to account for the corner scattering mechanism. The patterns obtained using the newer models were compared to the data of previously reported models, the Moment Method (MM), and experimental results. Near normal incidence, all the models agreed; however, near grazing incidence a need for higher-order and corner diffraction mechanisms was noted. In many instances the second-order and corner-scattered fields which were formulated improved the results

Part B: Pattern control of horn antennas

During this period, the computations of the impedance elements were completed. These include interactions between the two electric current modes, the elecric current mode and the magnetic current mode, and the two magnetic current modes. An accurate and efficient formulation of computing interactions between electric current mode and magnetic current mode was accomplished. This, together with other subroutines allows for the fill-in of all the elements in the matrix. After the fill-in of the impedance elements in the matrix, the forward problem is accomplished. That is, given the specification of the horn and the excitating waveguide mode, the radiation pattern of the antenna based on the integral equation can be obtained. An example case was run for a standard X-band gain-horn (DBG-520). The H- and E-plane patterns of this horn antenna with perfectly conducting walls are compared with the gain pattern available from the manufacturer for up to the first side lobe. Good agreements are obtained although the cross polarization has not yet been accounted for. The effect of the lossy coating on the radiation pattern was also investigated. The resulting E-plane pattern shows about 3-dB improvement in the first sidelobe and 4-dB improvement in the second sidelobe

Electromagnetic scattering by impedance structures

The scattering of electromagnetic waves from impedance structures is investigated, and current work on antenna pattern calculation is presented. A general algorithm for determining radiation patterns from antennas mounted near or on polygonal plates is presented. These plates are assumed to be of a material which satisfies the Leontovich (or surface impedance) boundary condition. Calculated patterns including reflection and diffraction terms are presented for numerious geometries, and refinements are included for antennas mounted directly on impedance surfaces. For the case of a monopole mounted on a surface impedance ground plane, computed patterns are compared with experimental measurements. This work in antenna pattern prediction forms the basis of understanding of the complex scattering mechanisms from impedance surfaces. It provides the foundation for the analysis of backscattering patterns which, in general, are more problematic than calculation of antenna patterns. Further proposed study of related topics, including surface waves, corner diffractions, and multiple diffractions, is outlined

High-frequency techniques for RCS prediction of plate geometries

Radar cross section (RCS) prediction of several rectangular plate geometries is discussed using high-frequency techniques such as the Uniform Theory of Diffraction (UTD) for perfectly conducting and impedance wedges and the Method of Equivalent Currents (MEC). Previous reports have presented detailed solutions to the principal-plane scattering by a perfectly conducting and a coated rectangular plate and nonprincipal-plane scattering by a perfectly conducting plate. These solutions are briefly reviewed and a modified model is presented for the coated plate. Theoretical and experimental data are presented for the perfectly conducting geometries. Agreement between theory and experiment is very good near and at normal incidence. In regions near and at grazing incidence, the disagreement between the data vary according to diffraction distances and angles involved. It is these areas of disagreement which are of extreme interest as an explanation for the disagreement will yield invaluable insight into scattering mechanisms which are not yet identified as major contributors near and at grazing incidence. Areas of disagreement between theory and experiment are identified and examined in an attempt to better understand and predict near-grazing incidence, grazing incidence, and nonprincipal-plane diffractions

Antenna pattern control using impedence surfaces

During this research period, September 16, 1990 to March 15, 1991, a design method for selecting a low-loss impedance material coating for a horn antenna pattern control has been developed. This method and the stepped waveguide technique can be employed to accurately compute the electromagnetic wave phenomenon inside the transition region of the horn antenna, with or without the impedance surfaces, from the feed to the radiating aperture. For moment method solutions of the electric and magnetic current distributions on the radiating aperture and the outer surface of the horn antenna, triangular surface-patch modes are introduced to replace the sinusoidal surface-patch modes as expansion and testing functions to provide a more physical expansion of the current distributions. In the synthesis problem, a numerical optimization process is formulated to minimize the error function between the desired waveguide modes and the modes provided by the horn transition with impedance surfaces. Since the modes generated by the horn transition with impedance surface are computed by analytical techniques, the computational error involved in the synthesis of the antenna pattern is minimum. Therefore, the instability problem can be avoided. A preliminary implementation of the techniques has demonstrated that the developed theory of the horn antenna pattern control using the impedance surfaces is realizable

Sex Education: The Parent's Perspective

Presents summary findings from the first in-depth statewide poll of California parents on school-based comprehensive sex education

Nonprincipal plane scattering of flat plates and pattern control of horn antennas

Using the geometrical theory of diffraction, the traditional method of high frequency scattering analysis, the prediction of the radar cross section of a perfectly conducting, flat, rectangular plate is limited to principal planes. Part A of this report predicts the radar cross section in nonprincipal planes using the method of equivalent currents. This technique is based on an asymptotic end-point reduction of the surface radiation integrals for an infinite wedge and enables nonprincipal plane prediction. The predicted radar cross sections for both horizontal and vertical polarizations are compared to moment method results and experimental data from Arizona State University's anechoic chamber. In part B, a variational calculus approach to the pattern control of the horn antenna is outlined. The approach starts with the optimization of the aperture field distribution so that the control of the radiation pattern in a range of directions can be realized. A control functional is thus formulated. Next, a spectral analysis method is introduced to solve for the eigenfunctions from the extremal condition of the formulated functional. Solutions to the optimized aperture field distribution are then obtained

Scattering from coated structures and antenna pattern control using impedance surfaces, part A/B

The scattering from coated, conducting structures, specifically the coated dihedral corner reflector configuration and the coated strip/plate configuration is examined. The formulation uses impedance-wedge Uniform Theory of Diffraction scattering coefficients to calculate the diffracted fields. A finite-thickness coating is approximated using the impedance boundary condition to arrive at an equivalent impedance for the coating. The formulation of the impedance wedge coefficients is outlined. Far-field, perfectly conducting approximations are discussed. Problems with the present dihedral corner reflector model for certain angles of incidence and observation are discussed along with a potentially rectifying modification. Also, the capacity to measure the electromagnetic properties of lossy materials was developed. The effects of using multiple material coatings on the radiation pattern of the horn antenna were studied. Numerous computations were devoted toward the inverse problem of synthesizing desired radiation patterns using the impedance surfaces. Stabilizing the equivalent sheet impedance using the linear control condition was attempted, and it was found to be a very difficult task