Discharge coefficients of flat-fan nozzles

The discharge coefficient (Cd) is a measure of how much of the pressure energy of a nozzle is converted into kinetic energy. With the discharge coefficient known, the exit velocity of the liquid sheet from the nozzle can be calculated from the pressure. It is important to be able to accurately calculate this nozzle exit velocity for use in initializing computational simulations such as AGDISP or CFD. The objective of this work was to measure the discharge coefficients for different types of flat-fan nozzles. In this work, a phase-Doppler interferometer was used to measure the exit velocity for standard, pre-orifice, and air-induction flat-fan nozzles, for rated sizes from 01 to 06, at pressures from 1 to 6 bar. From these velocities, discharge coefficients were calculated. The standard flat-fan nozzles had the highest discharge coefficients, while the air-induction nozzles had the lowest discharge coefficients. For a fixed type of nozzle design, the discharge coefficient increased slightly with the rated flow rate. The discharge coefficient decreased slightly with increasing pressure for a given nozzle. Much of the differences in droplet size for different types of nozzles can be explained by atomization theory as a result of the differences in discharge coefficients for the different nozzle designs

Evaluation of the AGDISP ground boom spray drift model

AGDISP is a well-established spray drift model that has been validated for aerial spraying of forests. Recently a prototypical ground boom option has been added to AGDISP. This was evaluated in the current study by collecting data from spray trials over a grass sward using a ground boom sprayer and representative application parameters. Spray solutions were made up of water, sticker adjuvant and a metal cation, which was changed for each spray application. Deposition from spray drift was measured by analyses of the cation deposits on artificial targets (plastic tapes) placed on the grass surface. Measured deposition was compared with profiles calculated using AGDISP. AGDISP overpredicted deposition from spray drift by a factor of 3.5-100 outside the spray block. Possible reasons for these discrepancies are given. Options are to improve measured deposition and the algorithms for the deposition on the downwind swath of the spray block and evaporation of droplets

Effect of HIV-1 infection on T-Cell-based and skin test detection of tuberculosis infection

RATIONALE: Two forms of the IFN-gamma release assay (IFNGRA) to detect tuberculosis infection are available, but neither has been evaluated in comparable HIV-infected and uninfected persons in a high tuberculosis incidence environment. OBJECTIVE: To compare the ability of the T-SPOT.TB (Oxford Immunotec, Abingdon, UK), QuantiFERON-TB Gold (Cellestis, Melbourne, Australia), and Mantoux tests to identify latent tuberculosis in HIV-infected and uninfected persons. METHODS: A cross-sectional study of 160 healthy adults without active tuberculosis attending a voluntary counseling and testing center for HIV infection in Khayelitsha, a deprived urban South African community with an HIV antenatal seroprevalence of 33% and a tuberculosis incidence of 1,612 per 100,000. MEASUREMENTS AND MAIN RESULTS: One hundred and sixty (74 HIV(+) and 86 HIV(-)) persons were enrolled. A lower proportion of Mantoux results was positive in HIV-infected subjects compared with HIV-uninfected subjects (p < 0.01). By contrast, the proportion of positive IFNGRAs was not significantly different in HIV-infected persons for the T-SPOT.TB test (52 vs. 59%; p = 0.41) or the QuantiFERON-TB Gold test (43 and 46%; p = 0.89). Fair agreement between the Mantoux test (5- and 10-mm cutoffs) and the IFNGRA was seen in HIV-infected people (kappa = 0.52-0.6). By contrast, poor agreement between the Mantoux and QuantiFERON-TB Gold tests was observed in the HIV-uninfected group (kappa = 0.07-0.30, depending on the Mantoux cutoff). The pattern was similar for T-SPOT.TB (kappa = 0.18-0.24). Interpretation: IFNGRA sensitivity appears relatively unimpaired by moderately advanced HIV infection. However, agreement between the tests and with the Mantoux test varied from poor to fair. This highlights the need for prospective studies to determine which test may predict the subsequent risk of tuberculosis

Laser Ablation Surface Preparation of Ti-6A1-4V for Adhesive Bonding

Adhesive bonding offers many advantages over mechanical fastening, but requires certification before it can be incorporated in primary structures for commercial aviation without disbond-arrestment features or redundant load paths. Surface preparation is widely recognized as the key step to producing robust and predictable bonds. Laser ablation imparts both topographical and chemical changes to a surface which can lead to increased bond durability. A laser based process provides an alternative to chemical-dip, manual abrasion and grit blast treatments which are expensive, hazardous, polluting, and less precise. This report documents preliminary testing of a surface preparation technique using laser ablation as a replacement for the chemical etch and abrasive processes currently applied to Ti-6Al-4V alloy adherends. Failure mode, surface roughness, and chemical makeup were analyzed using fluorescence enhanced visualization, microscopy, and X-ray photoelectron spectroscopy, respectively. Single lap shear tests were conducted on bonded and aged specimens to observe bond strength retention and failure mode. Some promising results showed increasing strength and durability of lap shear specimens as laser ablation coverage area and beam intensity increased. Chemical analyses showed trends for surface chemical species which correlated with improved bond strength and durability. Combined, these results suggest that laser ablation is a viable process for inclusion with or/and replacement of one or more currently used titanium surface treatments. On-going work will focus on additional mechanical tests to further demonstrate improved bond durability

CAPG is required for Ebola virus infection by controlling virus egress from infected cells

The replication of Ebola virus (EBOV) is dependent upon actin functionality, especially at cell entry through macropinocytosis and at release of virus from cells. Previously, major actin-regulatory factors involved in actin nucleation, such as Rac1 and Arp2/3, were shown important in both steps. However, downstream of nucleation, many other cell factors are needed to control actin dynamics. How these regulate EBOV infection remains largely unclear. Here, we identified the actin-regulating protein, CAPG, as important for EBOV replication. Notably, knockdown of CAPG specifically inhibited viral infectivity and yield of infectious particles. Cell-based mechanistic analysis revealed a requirement of CAPG for virus production from infected cells. Proximity ligation and split-green fluorescent protein reconstitution assays revealed strong association of CAPG with VP40 that was mediated through the S1 domain of CAPG. Overall, CAPG is a novel host factor regulating EBOV infection through connecting actin filament stabilization to viral egress from cells

Effects of ACTH, dexamethasone, and adrenalectomy on 11β-hydroxylase (CYP11B1) and aldosterone synthase (CYP11B2) gene expression in the rat central nervous system

Using a highly sensitive quantitative RT-PCR method for the measurement of CYP11B1 (11β-hydroxylase) and CYP11B2 (aldosterone synthase) mRNAs, we previously demonstrated that CYP11B2 expression in the central nervous system (CNS) is subject to regulation by dietary sodium. We have now quantified the expression of these genes in the CNS of male Wistar Kyoto (WKY) rats in response to systemic ACTH infusion, dexamethasone infusion, and to adrenalectomy. CYP11B1 and CYP11B2 mRNA levels were measured in total RNA isolated from the adrenal gland and discrete brain regions using real-time quantitative RT-PCR. ACTH infusion (40 ng/day for 7 days, N=8) significantly increased CYP11B1 mRNA in the adrenal gland, hypothalamus, and cerebral cortex compared with animals infused with vehicle only. ACTH infusion decreased adrenal CYP11B2 expression but increased expression in all of the CNS regions except the cortex. Dexamethasone (10 μg/day for 7 days, N=8) reduced adrenal CYP11B1 mRNA compared with control animals but had no significant effect on either gene's expression in the CNS. Adrenalectomy (N=6 per group) significantly increased CYP11B1 expression in the hippocampus and hypothalamus and raised CYP11B2 expression in the cerebellum relative to sham-operated animals. This study confirms the transcription of CYP11B1 and CYP11B2 throughout the CNS and demonstrates that gene transcription is subject to differential regulation by ACTH and circulating corticosteroid levels

A perspective on using experiment and theory to identify design principles in dye-sensitized solar cells

Dye-sensitized solar cells (DSCs) have been the subject of wide-ranging studies for many years because of their potential for large-scale manufacturing using roll-to-roll processing allied to their use of earth abundant raw materials. Two main challenges exist for DSC devices to achieve this goal; uplifting device efficiency from the 12 to 14% currently achieved for laboratory-scale ‘hero’ cells and replacement of the widely-used liquid electrolytes which can limit device lifetimes. To increase device efficiency requires optimized dye injection and regeneration, most likely from multiple dyes while replacement of liquid electrolytes requires solid charge transporters (most likely hole transport materials – HTMs). While theoretical and experimental work have both been widely applied to different aspects of DSC research, these approaches are most effective when working in tandem. In this context, this perspective paper considers the key parameters which influence electron transfer processes in DSC devices using one or more dye molecules and how modelling and experimental approaches can work together to optimize electron injection and dye regeneration. This paper provides a perspective that theory and experiment are best used in tandem to study DSC device

A novel dimethylformamide (DMF) free bar-cast method to deposit organolead perovskite thin films with improved stability

We report a solvent-free approach to synthesizing organolead perovskites by using solid state reactions to coat perovskite crystals onto Al2O3 or TiO2 nanoparticles followed by addition of terpineol affording perovskite inks. We have bar cast these inks to produce photoactive perovskite thin films which are significantly more stable to humidity than solution-processed films. This new method also avoids the use of toxic DMF solvent

ASRS Reports on Wake Vortex Encounters

ASRS is conducting a structured callback research project of wake vortex incidents reported to the ASRS at all US airports, as well as wake encounters in the enroute environment. This study has three objectives: (1) Utilize the established ASRS supplemental data collection methodology and provide ongoing analysis of wake vortex encounter reports; (2) Document event dynamics and contributing factors underlying wake vortex encounter events; and (3) Support ongoing FAA efforts to address pre-emptive wake vortex risk reduction by utilizing ASRS reporting contributions

Genetic dissection of the tissue‐specific roles of type III effectors and phytotoxins in the pathogenicity of Pseudomonas syringae pv. syringae to cherry

When compared with other phylogroups (PGs) of the Pseudomonas syringae species complex, P. syringae pv. syringae (Pss) strains within PG2 have a reduced repertoire of type III effectors (T3Es) but produce several phytotoxins. Effectors within the cherry pathogen Pss 9644 were grouped based on their frequency in strains from Prunus as the conserved effector locus (CEL) common to most P. syringae pathogens; a core of effectors common to PG2; a set of PRUNUS effectors common to cherry pathogens; and a FLEXIBLE set of T3Es. Pss 9644 also contains gene clusters for biosynthesis of toxins syringomycin, syringopeptin and syringolin A. After confirmation of virulence gene expression, mutants with a sequential series of T3E and toxin deletions were pathogenicity tested on wood, leaves and fruits of sweet cherry (Prunus avium) and leaves of ornamental cherry (Prunus incisa). The toxins had a key role in disease development in fruits but were less important in leaves and wood. An effectorless mutant retained some pathogenicity to fruit but not wood or leaves. Striking redundancy was observed amongst effector groups. The CEL effectors have important roles during the early stages of leaf infection and possibly acted synergistically with toxins in all tissues. Deletion of separate groups of T3Es had more effect in P. incisa than in P. avium. Mixed inocula were used to complement the toxin mutations in trans and indicated that strain mixtures may be important in the field. Our results highlight the niche‐specific role of toxins in P. avium tissues and the complexity of effector redundancy in the pathogen Pss 9644