Large-Scale Influences on Atmospheric River Induced Extreme Precipitation Events Along the Coast of Washington State

Atmospheric Rivers (ARs) are responsible for much of the precipitation along the west coast of the United States. In order to accurately predict AR events in numerical weather prediction, subseasonal and seasonal timescales, it is important to understand the large-scale meteorological influence on extreme AR events.Here, characteristics of ARs that result in an extreme precipitation event are compared to typical ARs on the coast of WashingtonState. In addition to more intense water vapor transport, notable differences in the synoptic forcing are present during extreme precipitation events that are not present during typical AR events.In particular, a negatively tilted low pressure system is positioned to the west in the Gulf of Alaska, alongside an upper level jet streak. Subseasonal and seasonal teleconnection patterns are known to influence the weather in the Pacific Northwest. The Madden JulianOscillation (MJO) is shown to be particularly important in determining the strength of precipitation associated with in AR ont he Washington coast

The Use of MERRA-2 Near Surface Meteorology to Understand the Behavior of Planetary Boundary Layer Heights Derived from Wind Profiler Data over the US Great Plains

The atmospheric general circulation model (GCM) that underlies the MERRA-2 reanalysis includes a suite of physical parameterizations that describe the processes that occur in the planetary boundary layer (PBL). The data assimilation system assures that the atmospheric state variables used as input to these parameterizations are constrained to the best fit to all of the available observations. Many studies, however, have shown that the GCM-based estimates of MERRA-2 PBL heights are biased high, and so are not reliable for boundary layer studies.A 20-year record of PBL heights was derived from Wind Profiler (WP) backscatter data measured at a wide network of stations throughout the US Great Plains and has been validated against independent estimates. The behavior of these PBL heights shows geographical and temporal variations that are difficult to attribute to particular physical processes without additional information that are not part of the observational record.In the present study, we use information on physical processes from MERRA-2 to understand the behavior of the WP derived PBL heights. The behavior of the annual cycle of both MERRA-2 and WP PBL heights shows four classes of behavior: (i) canonical, characterized by a monthly progression in PBL height that follows the solar insolation, (ii) double peak, characterized by canonical behavior that is interrupted by a minimum in July, (iii) late peak, characterized by a suppressed heights in May and June, and return to canonical in July and August, and (iv) early peak where the PBL height rises with solar insolation but is suppressed later in the summer. The explanation for these behaviors and the relationship to local precipitation, temperature, sensible and latent heat fluxes, net radiation and aerosol load is articulated using information from MERRA-2

The Use of MERRA-2 Near Surface Meteorology to Understand the Behavior of Planetary Boundary Layer Heights Derived from Wind Profiler Data over the US Great Plains

The atmospheric general circulation model (GCM) that underlies the MERRA-2 reanalysis includes a suite of physical parameterizations that describe the processes that occur in the planetary boundary layer (PBL). The data assimilation system assures that the atmospheric state variables used as input to these parameterizations are constrained to the best fit to all of the available observations. Many studies, however, have shown that the GCM-based estimates of MERRA-2 PBL heights are biased high, and so are not reliable for application related to constituent transport or the carbon cycle. A new 20-year record of PBL heights was derived from Wind Profiler (WP) backscatter data measured at a wide network of stations throughout the US Great Plains and has been validated against independent estimates. The behavior of these PBL heights shows geographical and temporal variations that are difficult to attribute to particular physical processes without additional information that are not part of the observational record. In the present study, we use information on physical processes from MERRA-2 to understand the behavior of the WP derived PBL heights. The behavior of the annual cycle of both MERRA-2 and WP PBL heights shows three classes of behavior: (i) canonical, where the annual cycle follows the annual cycle of the sun, (ii) delayed, where the PBL height reaches its annual maximum after the annual maximum of the solar insolation, and (iii) double maxima, where the PBL height begins to rise with the solar insolation but falls sometimes during the summer and then rises again. Although the magnitude of these types of variations is described by the WP PBL record, the explanation for these behaviors and the relationship to local precipitation, temperature, hydrology and sensible and latent heat fluxes is articulated using information from MERRA-2

Radiative Heating from Biomass Burning Aerosol and its Impact on Cloud Structure in the Southeast Atlantic

Marine boundary layer clouds, including the transition from stratocumulus to cumulus, are poorly represented in numerical weather prediction and general circulation models. In many cases, the complex physical relationships between marine boundary cloud morphology and the environmental conditions in which the clouds exist are not well understood. Such uncertainties arise in the presence of biomass burning carbonaceous aerosol, as is the case over the southeast Atlantic Ocean. It is likely that the absorbing and heating properties of these aerosols influence the microphysical composition and macrophysical arrangement of marine stratocumulus and trade cumulus in this region; however, this has yet to be quantified. The deployment of the Atmospheric Radiation Measurement Mobile Facility #1 (AMF1) in support of LASIC (Layered Atlantic Smoke Interactions with Clouds) provided a unique opportunity to collect observations of cloud and aerosol properties during two consecutive biomass burning seasons during July through October of 2016 and 2017 over Ascension Island (7.96 S, 14.35 W). Thermodynamic profiles will be analyzed through the unique combination of sounding data from radiosonde launches and microwave profiling radiometers, giving observations of additional quantities important for cloud development such as CAPE and CIN at a fine temporal resolution. The thermodynamic profiles will be presented in conjunction with detailed observations of the cloud structure over the site from a K-band cloud radar, micropulse lidar, and laser ceilometer. The observed thermodynamic and cloud profiles will be used as input forcing, alongside aerosols from the Modern Era Retrospective analysis for Research and Applications, version 2 (MERRA-2), for the Rapid Radiative Transfer Model (RRTM) to gain information regarding the radiative heating profiles. Idealized experiments using RRTM with and without aerosols will be used to quantify the impact of biomass burning carbonaceous aerosol plumes as they pass over the site. Due to documented discrepancies in the single scatter albedo (SSA) between models and observations, further sensitivity experiments will demonstrate the importance of the optical properties of biomass burning aerosol in accurately representing heating within the column. Finally, the heating rates will be put into context of the cloud structure over the site from the perspective of the mass flux closure from the University of Washington shallow convective scheme

Large-Scale Influences on Atmospheric RiverInduced Extreme Precipitation Events Along the Coast of Washington State

Transient, narrow plumes of strong water vapor transport, referred to as Atmospheric Rivers (ARs) are responsible for much of the precipitation along the west coast of the United States. Along the coast of Oregon and Washington, the most intense cool season precipitation events are almost always induced by an AR and can result in detrimental impacts on society due to mudslides and flooding. It is therefore important to understand the large scale influence on extreme AR events so that they can be accurately predicted on timescales ranging from numerical weather prediction to seasonal forecasts. Here, characteristics of ARs that result in observed extreme precipitation events are compared to typical ARs on the coast of Washington State using data from the Modern Era Retrospective analysis for Research and Applications, Version 2. In addition to more intense water vapor transport, notable differences in the synoptic scale forcing are present during extreme precipitation events that are not present during typical AR events. In particular, an anomalously deep low pressure system is stationed to the west in the Gulf of Alaska, alongside a jet streak overhead. Attention will also be given to subseasonal and seasonal teleconnection patterns that are known to influence the weather in the Pacific Northwest of the United States. While little influence can be seen from the phase of the El Nino Southern Oscillation, Pacific Decadal Oscillation, and Pacific North American Pattern, the Madden Julian Oscillation (MJO) can play a role in determining the strength of precipitation associated with in AR on the Washington Coast. Lastly, interactions between the MJO and other teleconnection patterns will be explored to determine key features that should be investigated when making subseasonal predictions for AR activity and the associated precipitation in the Pacific Northwest

Characterizing Differences in the Aerosol Plume and Cloud Structure over Ascension Island During the 2016 and 2017 Biomass Burning Seasons

Marine boundary layer clouds, including the transition from stratocumulus to cumulus, are poorly represented in numerical weather prediction and general circulation models. In many cases, the complex physical relationships between marine boundary cloud morphology and the environmental conditions in which the clouds exist are not well understood. Such uncertainties arise in the presence of biomass burning carbonaceous aerosol, as is the case over the southeast Atlantic Ocean. It is likely that the absorbing and heating properties of these aerosols influence the microphysical composition and macrophysical arrangement of marine stratocumulus and trade cumulus in this region; however, this has yet to be quantified. The deployment of the Atmospheric Radiation Measurement Mobile Facility #1 (AMF1) in support of LASIC (Layered Atlantic Smoke Interactions with Clouds) provided a unique opportunity to collect observations of cloud and aerosol properties during two consecutive biomass burning seasons during July through October of 2016 and 2017 over Ascension Island (7.96 S, 14.35 W). Through the use of AMF1 observations, the Modern Era Retrospective Analysis for Research and Applications, version 2 (MERRA-2), and back trajectories from the Hybrid Single-Particle Lagrangian Integrated Trajectory model (HYSPLIT), it will be demonstrated that differences in the atmospheric circulation during the two years result in varying aerosol conditions over Ascension Island. When the aerosol plume is overhead, the aerosol loading is higher during the 2016 season as a result of a weaker subtropical high-pressure system. Furthermore, the aerosol plume originates from central Africa in 2016, but further south in 2017. Contrasts in the season-to-season and day-to-day aerosol loading are used to categorize boundary layer cloud and sub-cloud turbulence measurements above Ascension Island using the AMF1 Doppler lidar and cloud radar

Thermodynamic, Cloud, and Radiative Heating Profiles over Ascension Island During the 2016 and 2017 Biomass Burning Seasons

Marine boundary layer clouds, including the transition from stratocumulus to cumulus, are poorly represented in numerical weather prediction and general circulation models. In many cases, the complex physical relationships between marine boundary cloud morphology and the environmental conditions in which the clouds exist are not well understood. Such uncertainties arise in the presence of biomass burning carbonaceous aerosol, as is the case over the southeast Atlantic Ocean. It is likely that the absorbing and heating properties of these aerosols influence the microphysical composition and macrophysical arrangement of marine stratocumulus and trade cumulus in this region; however, this has yet to be quantified. The deployment of the Atmospheric Radiation Measurement Mobile Facility #1 (AMF1) in support of LASIC (Layered Atlantic Smoke Interactions with Clouds) provided a unique opportunity to collect observations of cloud and aerosol properties during two consecutive biomass burning seasons during July through October of 2016 and 2017 over Ascension Island (7.96 S, 14.35 W). Thermodynamic profiles will be analyzed through the unique combination of sounding data from radiosonde launches and microwave profiling radiometers, giving observations of additional quantities important for cloud development such as CAPE and CIN at a fine temporal resolution. The thermodynamic profiles will be presented in conjunction with detailed observations of the cloud structure over the site from a K-band cloud radar, micropulse lidar, and laser ceilometer. Finally, the observed thermodynamic and cloud profiles will be used as input forcing, alongside aerosols from the Modern Era Retrospective analysis for Research and Applications, version 2 (MERRA-2), for the Rapid Radiative Transfer Model (RRTM) to gain information regarding the radiative heating profiles. Idealized experiments using RRTM with and without aerosols will be used to quantify the impact of biomass burning carbonaceous aerosol plumes as they pass over the site

Radiative Heating Profiles over Ascension Island during the 2016 and 2017 Biomass Burning Seasons

Marine boundary layer clouds, including the transition from stratocumulus to cumulus, are poorly represented in numerical weather prediction and general circulation models. In many cases, the complex physical relationships between cloud morphology and the environmental conditions in which marine boundary layer clouds exist are not well understood. Such uncertainties arise in the presence of biomass burning carbonaceous aerosol, as is the case over the southeast Atlantic Ocean, where it is likely that the absorbing and heating properties of these aerosols modify the microphysical composition and macrophysical arrangement of marine stratocumulus and trade cumulus. The deployment of the Atmospheric Radiation Measurement Mobile Facility #1 (AMF1) in support of LASIC (Layered Atlantic Smoke Interactions with Clouds) provided a unique opportunity to observe thermodynamic, cloud and aerosol properties during two consecutive biomass burning seasons from July through October of 2016 and 2017 over Ascension Island (7.96 S, 14.35 W). These observations in conjunction with radiation transfer modeling were used to assess the impact of biomass burning carbonaceous aerosol plumes as they passed over the site.Thermodynamic profiles were generated using a combination of radiosonde data and thermodynamic profilers to provide high temporal resolution profiles of quantities that are important for cloud development, such as CAPE and CIN. Coincident Ka-band radar and lidar profiles were used to characterize the cloud and sub-cloud structure. The resulting thermodynamic and cloud profiles are used as input forcing for the Rapid Radiative Transfer Model (RRTM) to compute radiative heating profiles over the observation site. Idealized experiments using RRTM, with and without aerosols present, are used to assess the impacts of the absorbing aerosol on the heating rate profiles

The Influence of Prescribed Boundary Conditions on Near-Surface Temperature over the Arctic in the MERRA-2 Atmospheric Model

An accurate historical record of evolving Arctic conditions is integral to furthering our understanding of climate processes and to providing a foundation for predicting future climate scenarios in northern high latitudes. Atmospheric reanalyses are seen as an important source of information on the recent past for the data-sparse Arctic region. An assessment of near-surface Arctic air temperatures finds significant discrepancies among the various modern reanalyses. An important point is the treatment of surface boundary conditions: specifically, the sea ice cover and sea surface temperatures (SSTs) over the Arctic Ocean. Reanalyses use different methodologies and data sources for SSTs and sea ice concentration boundary forcing. Notably, the Modern Era Retrospective analysis for Research and Applications, version 2 (MERRA-2) and the European Centre for Medium-Range Weather Forecasts Interim Re-Analysis (ERA-Interim) both use boundary forcing derived from the Operational Sea Surface Temperature and Sea Ice Analysis (OSTIA) over an extended, overlapping period of time. This allows for an examination of differences between the two systems while both concurrently employ the same fractional sea ice coverage. To further understand these differences, an ensemble of AMIP-style simulations using the MERRA-2 atmospheric model - but without data assimilation - shows considerable differences in Arctic temperatures as compared to reanalyses, particularly in autumn and winter months. Results from the AMIP simulations suggest that the surface representation over sea ice used in the MERRA-2 model provides an intrinsic warm bias and obfuscates Arctic Amplification, an established feature present in observations and reanalyses. An additional ensemble of AMIP-style simulations using the MERRA-2 atmospheric model was performed using boundary conditions derived from the ERA-Interim reanalysis. An in-depth comparison of surface temperatures over the Arctic from the two reanalyses and two AMIP-style ensembles will be presented, along with an assessment of the effects of the varying Arctic temperature time series on the atmospheric general circulation and energy budget

An Intercomparison of Changes Associated with Earth's Lower Tropospheric Temperature Using Traditional and AMIP-Style Reanalyses

Reanalyses have become an integral tool for evaluating regional and global climate variations, and an important component of this is modifications to the energy budget. Reductions in Arctic Sea ice extent has induced an albedo feedback, causing the Arctic to warm more rapidly than anywhere else in the world, referred to as "Arctic Amplification." This has been demonstrated by observations and numerous reanalyses, including the Modern Era Retrospective Analysis for Research and Applications, Version 2 (MERRA-2). However, the Arctic Amplification signal is non-existent in a ten member ensemble of the MERRA-2 Atmospheric Model Intercomparison Project (M2AMIP) simulations, using the same prescribed climate forcing, including Sea Surface Temperature (SST) and ice. An evaluation of the temperature tendency within the lower troposphere due to radiation, moisture, and dynamics as well as the surface energy budget in MERRA-2 and M2AMIP will demonstrate that despite identical prescribed SSTs and sea ice in both versions, enhanced warming in the Arctic in MERRA-2 is in response to the analysis increment tendency due to temperature observations. Furthermore, the role of boundary conditions, model biases and changes in observing systems on the Arctic Amplification signal will be assessed. Literature on the topic of Arctic Amplification demonstrates that the enhanced warming begins in the mid-1990s. Anomalously warm Arctic SST in the early time period of MERRA-2 can mute the trend in Arctic lower troposphere temperature without the constraint of observations in M2AMIP. Additionally, MERRA-2 uses three distinct datasets of SST and sea ice concentration, which also plays a role