38,761 research outputs found
Exploratory flutter test in a cryogenic wind tunnel
A model consisting of a rigid wing with an integral, flexible beam support that was cantilever mounted from the wall in the NASA LaRC 0.3-m transonic cryogenic tunnel was used in a flutter analysis study. The wing had a rectangular planform of aspect ratio 1.5 and a 64A010 airfoil. Various considerations and procedures for conducting flutter tests in a cryogenic wind tunnel were evaluated. Flutter onset conditions were established from extrapolated subcritical response measurements. A flutter boundary was determined at cryogenic temperatures over a Mach number M range from 0.5 to 0.9. Flutter was obtained at two different Reynolds numbers R at M = 0.5 (R = 4.4 and 18.4 x 10 to the 6th power) and at M = 0.8 (R = 5.0 and 10.4 x 10 to the 6th power). Flutter analyses using subsonic lifting surface (kernel function) aerodynamics were made over the range of test conditions. To evaluate the Reynolds number effects at M = 0.5 and 0.8, the experimental results were adjusted using analytical trends to account for differences in the model test temperatures and mass ratios. The adjusted experimental results indicate that increasing Reynolds number from 5.0 to 20.0 x 10 to the 6th power decreased the dynamic pressure by 4.0 to 6.5 percent at M = 0.5 and 0.8
Divergence study of a high-aspect ratio, forward-swept wing
An experimental wind-tunnel study to determine the divergence characteristics of a high-aspect ratio, forward-swept wing has been conducted in the NASA Langley Research Center (LaRC) Transonic Dynamics Tunnel (TDT). The rectangular wing used for this study had a panel aspect ratio of 9.16 (lambda = 0 deg.) and the sweep angle could be set at lambda = 0 deg., -15 deg., -30 deg., -45 deg., or -60 deg. A rectangular wing tip shape was tested at each of these sweep angles. In addition, a tip shape parallel to the freestream flow was tested for a wing sweep angle of lambda = -45 deg. The root of the wing was cantilever mounted to the wall of the wind tunnel. Divergence conditions were measured at M = 0.4 for each sweep angle and tip configuration tested. Subcritical response techniques were used to extrapolate to the divergence conditions during the wind-tunnel test. The primary objective of this test was to obtain data which could be used to verify for this configuration the divergence prediction capability of an aeroelastic analysis code. Subsonic lifting surface theory (kernel function) aerodynamics are utilized by this particular code. The analytical predictions of divergence were found to be significantly conservative at all forward sweep angles. At lambda = -45 deg., the analysis was 14 percent conservative. The effect of the two tip shapes on the divergence dynamic pressure was predicted accurately by the analysis. The divergence condition for the tip shape parallel to the flow occurred at a dynamic pressure 14 percent higher than the divergence condition with a rectangular tip shape
Inorganic glass ceramic slip rings
Prototypes of slip rings have been fabricated from ceramic glass, a material which is highly resistant to deterioration due to high temperature. Slip ring assemblies were not structurally damaged by mechanical tests and performed statisfactorily for 200 hours
Experimental studies of glass refining
The basic components of the experimental apparatus were selected and acquired. Techniques were developed for the fabrication of the special crucibles necessary for the experiments. Arrangements were made for the analysis of glass and gas bubble samples for composition information. Donations of major equipment were received for this project from Owens, Illinois where a similar study had been conducted a few year ago. Decisions were made regarding the actual glass composition to be used, the gas to be used in the first experiments, and the temperatures at which the experiments should be conducted. A microcomputer was acquired, and work was begun on interfacing the video analyzer to it
The motion of bubbles inside drops in containerless processing
A theoretical model of thermocapillary bubble motion inside a drop, located in a space laboratory, due to an arbitrary axisymmetric temperature distribution on the drop surface was constructed. Typical results for the stream function and temperature fields as well as the migration velocity of the bubble were obtained in the quasistatic limit. The motion of bubbles in a rotating body of liquid was studied experimentally, and an approximate theoretical model was developed. Comparison of the experimental observations of the bubble trajectories and centering times with theoretical predictions lends qualified support to the theory
Design investigation and development of design improvements for ST124-M stabilized platform slip ring capsules Final report
Eliminating insulating deposits on precious metal contacts in stabilized platform slip ring capsule
Predictions of entry heating for lower surface of shuttle orbiter
A broad base of thermocouple and phase change paint data was assembled and correlated to the nominal design 14414.1 and proposed STS-1 (first flight of the space transportation system) entry trajectories. Averaged data from phase change paint tests compared favorably with thermocouple data for predicting heating rates. Laminar and turbulent radiation equilibrium heating rates were computed on the lower surface of the Shuttle orbiter for both trajectories, and the lower surface center line results were compared both with aerodynamic heating design data and with flight values from the STS-1 and STS-2 trajectories. The peak laminar heating values from the aerodynamic heating design data book were generally 40 to 60 percent higher than the laminar estimates of this study, except at the 55 percent location of maximum span where the design data book values were less than 10 percent higher. Estimates of both laminar and turbulent heating rates compared favorably with flight data
Coupling of phonons to a helium atom adsorbed on graphite
We compute the self-energy for a ^4He atom adsorbed on graphite to second order in the phonon coupling. The phonon contributions amount to several degrees Kelvin. The imaginary part corresponds to a lifetime of some 10^(-11) s
Physical Bias of Galaxies From Large-Scale Hydrodynamic Simulations
We analyze a new large-scale (Mpc) numerical hydrodynamic
simulation of the popular CDM cosmological model, including in our
treatment dark matter, gas and star-formation, on the basis of standard
physical processes. The method, applied with a numerical resolution of
kpc (which is still quite coarse for following individual galaxies,
especially in dense regions), attempts to estimate where and when galaxies
form. We then compare the smoothed galaxy distribution with the smoothed mass
distribution to determine the "bias" defined as on scales large compared with the code
numerical resolution (on the basis of resolution tests given in the appendix of
this paper). We find that (holding all variables constant except the quoted
one) bias increases with decreasing scale, with increasing galactic age or
metallicity and with increasing redshift of observations. At the Mpc
fiducial comoving scale bias (for bright regions) is 1.35 at reaching to
3.6 at , both numbers being consistent with extant observations. We also
find that Mpc voids in the distribution of luminous objects are
as observed (i.e., observed voids are not an argument against CDM-like models)
and finally that the younger systems should show a colder Hubble flow than do
the early type galaxies (a testable proposition). Surprisingly, little
evolution is found in the amplitude of the smoothed galaxy-galaxy correlation
function (as a function of {\it comoving} separation). Testing this prediction
vs observations will allow a comparison between this work and that of Kauffmann
et al which is based on a different physical modelingmethod.Comment: in press, ApJ, 26 latex pages plus 7 fig
Cosmological Constraints from Moments of the Thermal Sunyaev-Zel'dovich Effect
In this paper, we explain how moments of the thermal Sunyaev-Zel'dovich (tSZ)
effect can constrain both cosmological parameters and the astrophysics of the
intracluster medium (ICM). As the tSZ signal is strongly non-Gaussian, higher
moments of tSZ maps contain useful information. We first calculate the
dependence of the tSZ moments on cosmological parameters, finding that higher
moments scale more steeply with sigma_8 and are sourced by more massive galaxy
clusters. Taking advantage of the different dependence of the variance and
skewness on cosmological and astrophysical parameters, we construct a
statistic, ||/^1.4, which cancels much of the dependence on cosmology
(i.e., sigma_8) yet remains sensitive to the astrophysics of intracluster gas
(in particular, to the gas fraction in low-mass clusters). Constraining the ICM
astrophysics using this statistic could break the well-known degeneracy between
cosmology and gas physics in tSZ measurements, allowing for tight constraints
on cosmological parameters. Although detailed simulations will be needed to
fully characterize the accuracy of this technique, we provide a first
application to data from the Atacama Cosmology Telescope and the South Pole
Telescope. We estimate that a Planck-like full-sky tSZ map could achieve a <1%
constraint on sigma_8 and a 1-sigma error on the sum of the neutrino masses
that is comparable to the existing lower bound from oscillation measurements.Comment: 11 pages, 12 figures, to be submitted to Phys. Rev. D; v2: 14 pages,
16 figures, matches PRD accepted version (changes from v1 include additional
calculations with primordial non-Gaussianity and a new appendix discussing
the tSZ kurtosis
- …