Evaluation of the Photon Contributions to the Solar Energy Conversion for Organic Luminescent Down-Shifting Liquid Beam Splitters in Hybrid Photovoltaic-Thermal (PVT) Applications Using Raytracing Monte Carlo Simulations

A hybrid photovoltaic-thermal (PVT) system combines photovoltaic (PV) and photo-thermal (PT) energy collection into a single structure, enhancing the potential to achieve greater solar energy conversion efficiencies. Such enhanced efficiencies can result in greater economic returns and could promote a larger uptake of PVT devices in cold and temperate climate countries. Through the utilization of a Monte Carlo ray-tracing model, this work provides new insights into the optical, electrical, and thermal characteristics of PVT devices. In particular, the work focuses on evaluating the behaviour of novel luminescent imidazole-phenanthroline-based working fluids that were previously experimentally investigated as liquid spectral beam splitters (SBS). The modelling procedure outlined here is able of providing an in-depth analysis of various categories of photons undergoing events such as transmission, absorption, parasitic absorption, and luminescent downshifting (LDS) which, otherwise, are difficult or impossible to detect experimentally. Evaluating such photon characteristics provides the possibility to estimate the direct contribution of the luminophore (embedded within the working fluid) to the enhanced conversion efficiencies reported for PVT systems. In addition, the model can also allow for better tuning of the luminophore properties to match the main factors that are influencing the energy conversion dynamics of these systems. The current results indicate that the embedded luminophore is able of providing direct contributions of up to 91% for thermal power generation and 77% towards electrical power generation for the various concentrations of the liquid filters when compared with the individual performances of the independent PV or PT systems

Modelling the human accommodation system using finite element analysis

The human accommodation system has been extensively examined for over a century, with a particular focus on trying to understand the mechanisms that lead to the loss of accommodative ability with age (Presbyopia). The accommodative process, along with the potential causes of presbyopia, are disputed; hindering efforts to develop methods of restoring accommodation in the presbyopic eye. One method that can be used to provide insight into this complex area is Finite Element Analysis (FEA). The effectiveness of FEA in modelling the accommodative process has been illustrated by a number of accommodative FEA models developed to date. However, there have been limitations to these previous models; principally due to the variation in data on the geometry of the accommodative components, combined with sparse measurements of their material properties. Despite advances in available data, continued oversimplification has occurred in the modelling of the crystalline lens structure and the zonular fibres that surround the lens. A new accommodation model was proposed by the author that aims to eliminate these limitations. A novel representation of the zonular structure was developed, combined with updated lens and capsule modelling methods. The model has been designed to be adaptable so that a range of different age accommodation systems can be modelled, allowing the age related changes that occur to be simulated. The new modelling methods were validated by comparing the changes induced within the model to available in vivo data, leading to the definition of three different age models. These were used in an extended sensitivity study on age related changes, where individual parameters were altered to investigate their effect on the accommodative process. The material properties were found to have the largest impact on the decline in accommodative ability, in particular compared to changes in ciliary body movement or zonular structure. Novel data on the importance of the capsule stiffness and thickness was also established. The new model detailed within this thesis provides further insight into the accommodation mechanism, as well as a foundation for future, more detailed investigations into accommodation, presbyopia and accommodative restoration techniques

Experimental and Theoretical Evaluation of a Commercial Luminescent Dye for PVT Systems

Combining photovoltaic (PV) and photo-thermal (PT) energy collection strategies in a single system can enhance solar energy conversion efficiencies, leading to increased economic returns and wider adoption of renewable energy sources. This study focuses on incorporating a commercial luminescent organic dye (BASF Lumogen F Red 305) into ethylene glycol to explore its potential for PVT applications. The optical and electrical characteristics of the working fluid were evaluated at different temperatures under direct solar irradiance. Pristine ethylene glycol reduced the maximum PV cell temperature by 10 °C. The inclusion of luminescent dye at various concentrations further reduced the maximum temperature, with the lowest concentration achieving a 7 °C decrease compared to pristine ethylene glycol. The highest dye concentration (0.50 wt%) resulted in a significant temperature reduction of 12 °C. While electrical conversion efficiencies decreased with increasing dye concentration, all concentrations exhibited higher fill factors compared to the bare PV cell during the 100-min illumination period. A ray-tracing model was employed to analyze the behavior of the luminescent dye and quantify transmitted energy for electricity and thermal energy production. Different concentrations showed varying energy outputs, with lower concentrations favoring electrical energy and higher concentrations favoring thermal energy. Economic assessment revealed the viability of certain concentrations for specific countries, highlighting the trade-off between thermal and electrical energy generation. These findings provide valuable insights for PVT system applications in different geographical and economic contexts

A program to analyse optical coherence tomography images of the ciliary muscle

Purpose: To describe and validate bespoke software designed to extract morphometric data from ciliary muscle Visante Anterior Segment Optical Coherence Tomography (AS-OCT) images. Method: Initially, to ensure the software was capable of appropriately applying tiered refractive index corrections and accurately measuring orthogonal and oblique parameters, 5 sets of custom-made rigid gas-permeable lenses aligned to simulate the sclera and ciliary muscle were imaged by the Visante AS-OCT and were analysed by the software. Human temporal ciliary muscle data from 50 participants extracted via the internal Visante AS-OCT caliper method and the software were compared. The repeatability of the software was also investigated by imaging the temporal ciliary muscle of 10 participants on 2 occasions. Results: The mean difference between the software and the absolute thickness measurements of the rigid gas-permeable lenses were not statistically significantly different from 0 (t = -1.458, p = 0.151). Good correspondence was observed between human ciliary muscle measurements obtained by the software and the internal Visante AS-OCT calipers (maximum thickness t = -0.864, p = 0.392, total length t = 0.860, p = 0.394). The software extracted highly repeatable ciliary muscle measurements (variability ≤6% of mean value). Conclusion: The bespoke software is capable of extracting accurate and repeatable ciliary muscle measurements and is suitable for analysing large data sets

Developments in contact lens measurement:a comparative study of industry standard geometric inspection and optical coherence tomography

Purpose: The aim of this study was to compare a developmental optical coherence tomography (OCT) based contact lens inspection instrument to a widely used geometric inspection instrument (Optimec JCF), to establish the capability of a market focused OCT system. Methods: Measurements of 27 soft spherical contact lenses were made using the Optimec JCF and a new OCT based instrument, the Optimec is830. Twelve of the lenses analysed were specially commissioned from a traditional hydrogel (Contamac GM Advance 49%) and 12 from a silicone hydrogel (Contamac Definitive 65), each set with a range of back optic zone radius (BOZR) and centre thickness (CT) values. Three commercial lenses were also measured; CooperVision MyDay (Stenfilcon A) in −10D, −3D and +6D powers. Two measurements of BOZR, CT and total diameter were made for each lens in temperature controlled saline on both instruments. Results: The results showed that the is830 and JCF measurements were comparable, but that the is830 had a better repeatability coefficient for BOZR (0.065 mm compared to 0.151 mm) and CT (0.008 mm compared to 0.027 mm). Both instruments had similar results for total diameter (0.041 mm compared to 0.044 mm). Conclusions: The OCT based instrument assessed in this study is able to match and improve on the JCF instrument for the measurement of total diameter, back optic zone radius and centre thickness for soft contact lenses in temperature controlled saline

Femtosecond laser inscribed advanced calibration phantom for optical coherence tomography (OCT)

Optical coherence tomography (OCT) has developed rapidly and is widely used in different fields such as biomedicine and optometry. The characterization and calibration of OCT systems is essential when testing the system and during normal use to ensure that there is no misalignment or distortion that could affect clinical decisions. Imaging distortion is a significant challenge for OCT systems when viewing through non-planar surfaces. Here we present a new multi-purpose plano-convex OCT phantom which is designed to be used for OCT characterization and calibration as well as to validate the post-processing algorithm for the imaging distortion of the OCT systems. A femtosecond laser direct writing technique is used to fabricate this phantom which consists of a landmark layer with radial lines at a 45-degree angular spacing inscribed at 50μm in apparent depth (AD) underneath the planar surface. Below that there are a further 8 layers of a spherical inscription pattern which has a 150μm (in AD) separation between each layer. The first spherical layer is located at 150μm (in AD) underneath the planar surface. Due to the laser power loss when travelling through the deeper layer, an increased power is applied to the deeper layers. The spherical pattern overcomes orientation issues seen with existing calibration phantoms. The landmark layer is applied so that it can easily tell the exact location when scanning which will also benefit the image distortion correction process

Non-planar calibration phantoms for optical coherence tomography

Optical coherence tomography (OCT) is increasingly used in areas such as ophthalmology and contact lens metrology. However, in such cases, image distortion can occur due to the non-planar nature of the measured sample. Postprocessing algorithms can be implemented to correct this distortion. Here we present an OCT phantom designed to confirm the validity of post-processing algorithms used for measuring curved surfaces. A multi-purpose OCT phantom has been created within a fused silica plano-convex lens using the direct femtosecond laser writing technique. This phantom can be used to calibrate and quantitatively assess the performance (e.g. resolution, sensitivity and distortion) of OCT systems and associated post-processing algorithms for curved structures such as lenses. This novel OCT phantom has been characterized using an optical microscope and OCT systems