314 research outputs found
S-band omnidirectional antenna for the SERT-C satellite
The program to design an S-band omnidirectional antenna system for the SERT-C spacecraft is discussed. The program involved the tasks of antenna analyses by computer techniques, scale model radiation pattern measurements of a number of antenna systems, full-scale RF measurements, and the recommended design, including detailed drawings. A number of antenna elements were considered: the cavity-backed spiral, quadrifilar helix, and crossed-dipoles were chosen for in-depth studies. The final design consisted of a two-element array of cavity-backed spirals mounted on opposite sides of spacecraft and fed in-phase through a hybrid junction. This antenna system meets the coverage requirement of having a gain of at least minus 10 dBi over 50 percent of a 4 pi steradian sphere with the solar panels in operation. This coverage level is increased if the ground station has the capability to change polarization
Validation of interpolative interfaces for rotorcraft applications
The study uses computational methods to simulate fluid flow on the NASA ROBIN helicopter model and on a simplified rotor geometry previously tested at Mississippi State. The ROBIN model and the rotor are run using an unstructured grid. Results from the Tenasi flow solver are compared against both simulated and wind tunnel data. Tenasi is an unstructured, Reynolds Averaged Navier-Stokes (RANS) solver developed at the SimCenter: National Center for Computational Engineering, located at the University of Tennessee at Chattanooga. Steady-state results for the isolated ROBIN fuselage and unsteady results for both fuselage and rotor systems are computed. In the unsteady case, relative grid motion of both the rotor disk relative to the fuselage and the cyclic pitching motion of each blade as the rotor turns must be simulated. Thus, each moving component is meshed in its own subdomain, and a nonmatching and sliding interface method is used to compute fluxes across the subdomain boundaries. Testing of the implementation of this method in Tenasi is the primary purpose of the study
Machine-Checked Proofs For Realizability Checking Algorithms
Virtual integration techniques focus on building architectural models of
systems that can be analyzed early in the design cycle to try to lower cost,
reduce risk, and improve quality of complex embedded systems. Given appropriate
architectural descriptions, assume/guarantee contracts, and compositional
reasoning rules, these techniques can be used to prove important safety
properties about the architecture prior to system construction. For these
proofs to be meaningful, each leaf-level component contract must be realizable;
i.e., it is possible to construct a component such that for any input allowed
by the contract assumptions, there is some output value that the component can
produce that satisfies the contract guarantees. We have recently proposed (in
[1]) a contract-based realizability checking algorithm for assume/guarantee
contracts over infinite theories supported by SMT solvers such as linear
integer/real arithmetic and uninterpreted functions. In that work, we used an
SMT solver and an algorithm similar to k-induction to establish the
realizability of a contract, and justified our approach via a hand proof. Given
the central importance of realizability to our virtual integration approach, we
wanted additional confidence that our approach was sound. This paper describes
a complete formalization of the approach in the Coq proof and specification
language. During formalization, we found several small mistakes and missing
assumptions in our reasoning. Although these did not compromise the correctness
of the algorithm used in the checking tools, they point to the value of
machine-checked formalization. In addition, we believe this is the first
machine-checked formalization for a realizability algorithm.Comment: 14 pages, 1 figur
What Does an Exemplary Middle School Mathematics Teacher Look Like? The Use of a Professional Development Rubric
A School University Research Network (SURN) committee composed of current mathematics teachers, central office math supervisors, building administrators, mathematicians, and mathematics educators researched numerous sources regarding best practices in mathematics instruction. The resulting professional development rubric synthesizes their findings and can serve a professional development role by providing teachers and administrators with a tool to develop clarity and consensus on best mathematics instructional practices, and how these practices are implemented in the classroom. It is also being used as a tool for cooperating teachers in their supervision of student teachers and as a reflective method for self-evaluation
Summary of measurement results of ozone, methane, and nonmethane hydrocarbons for C-54 aircraft. 1979 Southeastern Virginia Urban Plume Study
Methane, nonmethane hydrocarbon, and ozone data collected in a C-54 aircraft during the 1979 Southeastern Virginia Urban Plume Study are presented. Three major aircraft experiments were flown on five separate days in August collecting 20 hours of flight data. Direct correlation between ozone and hydrocarbon plumes was observed on several occasions
Verifying the Safety of a Flight-Critical System
This paper describes our work on demonstrating verification technologies on a
flight-critical system of realistic functionality, size, and complexity. Our
work targeted a commercial aircraft control system named Transport Class Model
(TCM), and involved several stages: formalizing and disambiguating requirements
in collaboration with do- main experts; processing models for their use by
formal verification tools; applying compositional techniques at the
architectural and component level to scale verification. Performed in the
context of a major NASA milestone, this study of formal verification in
practice is one of the most challenging that our group has performed, and it
took several person months to complete it. This paper describes the methodology
that we followed and the lessons that we learned.Comment: 17 pages, 5 figure
Home freezing: Meat and poultry
The Oklahoma Cooperative Extension Service periodically issues revisions to its publications. The most current edition is made available. For access to an earlier edition, if available for this title, please contact the Oklahoma State University Library Archives by email at [email protected] or by phone at 405-744-6311
Advancing Clinical Practice through Integration of Congenital Cytomegalovirus (cCMV) Testing with Newborn Hearing Screening at Mayo Clinic
Although cCMV is the leading non-genetic cause of childhood hearing loss in the United States, neither targeted nor universal screening protocols have been well established to identify cCMV in newborns. Moreover, until cCMV testing is universal, clinical protocols need to account for the complexities of individualized care in partnership with interprofessional care teams. This work addressed an immediate clinical practice need to identify cCMV with subsequent hearing monitoring of babies who test positive for cCMV. This effort focused on three primary objectives to: 1) define interprofessional, team-based approach to facilitate care pathways; 2) develop a clinical workflow for all babies who refer on inpatient hearing screening to be tested for cCMV by 21 days of age; 3) develop a hearing monitoring plan for all babies who test positive for cCMV. The development and integration of our interprofessional, team-based approach to institute cCMV testing by 21 days of age on all babies who refer inpatient newborn hearing screening and subsequent monitoring is described. Our observed referral rate was lower than predicted (2.7%) from existing literature with only one positive cCMV outcome noted in the two-year span. This study demonstrates the feasibility of a hearing-targeted cCMV testing paradigm in our clinic practice
- …