3,610 research outputs found
The Gaussian Plasma Lens in Astrophysics. Refraction
We consider the geometrical optics for refraction of a distant radio source
by an interstellar plasma lens, with application to a lens with a Gaussian
electron column density profile. The refractive properties of the lens are
specified completely by a dimensionless parameter, alpha, which is a function
of the wavelength of observation, the lens' electron column density, the
lens-observer distance, and the transverse diameter of the lens. Relative
motion of the observer and lens produces modulations in the source's light
curve. Plasma lenses are diverging so the light curve displays a minimum, when
the lens is on-axis, surrounded by enhancements above the unlensed flux
density. Lensing can also produce caustics, multiple imaging, and angular
position wander of the background source. If caustics are formed, the
separation of the outer caustics can constrain alpha, while the separation of
the inner caustics can constrain the size of the lens. We apply our analysis to
0954+654, a source for which we can identify caustics in its light curve, and
1741-038, for which polarization observations were obtained during and after
the scattering event. We find general agreement between modelled and observed
light curves at 2.25 GHz, but poor agreement at 8.1 GHz. The discrepancies may
result from a combination of lens substructure or anisotropic shape, a lens
that only grazes the source, or unresolved source substructure. Our analysis
places the following constraints on the lenses: Toward 0954+654 (1741-038) the
lens was 0.38 AU (0.065 AU) in diameter, with a peak column density of 0.24 pc
cm^{-3} (1E-4 pc cm^{-3}) and an electron density of 1E5 cm^{-3} (300 cm^{-3}).
The angular wander caused by the lens was 250 mas (0.4 mas) at 2.25 GHz. For
1741-038, we place an upper limit of 100 mG on the lens' magnetic field.Comment: 26 pages, LaTeX2e using AASTeX macro aaspp4, 11 PostScript figures;
to be published in Ap
Effects of Thermal Shock on Mechanical Behaviour of Kevlar Fibre Composites
The development of composite technology represents one of the most significant advances in materials science since 1940s. The major advantages of composite materials are their high strength and stiffness, light weight, corrosion resistance, crack and fatigue resistance and design flexibility as compared to metallic materials. Because
of the attractive properties. the use of composite materials has been increasing steadily in recent years. Unfortunately, there are disadvantages in composite materials as compared with metals. They include brittleness, vulnerability to stress concentration,
inflexibility for localised multidirectional stresses, sensitivity to environmental effects, and poor damage tolerance to impact. These factors must be critically considered in designing a composite system.
The aramid keviar family of fibres have been accepted as reinforcement for composites and finds wider and newer applications in various industrial and aerospace
sectors. The interfacial bond strength between aramid fibres and epoxy resins is normally lower than what is experienced with carbon fibre composites. This weakness
with kevlar necessitates investigation and evaluation of the interlaminar shear strength (ILSS) and modulus under some realistic environmental conditions. The present
work has been taken up to evaluate the variation of ILS S and modulus values after being given the extreme thermal shock of 160°C thermal gradient. The thermal shock
is given in two separate ways, firstly, one series of kevlar/ epoxy and kevlar/polyester short beam shear (SBS) specimens are kept in a oven at 80°C for different time intervals and then immersed in a liquid bath at -80`'C temperature. The other experiment is done in reverse way i.e. first kept at -80°C and then exposed to 80°C temperature. The interesting variations of ELSS and modulus values have generated some ideas for
assessment in this area. The thermal shock, positive temperature and cryogenic temperature affect the kevlar/epoxy and kevlar/polyester composites in a very complex way. The wide fluctuation in results necessitates further investigation and depth analysis of this interaction, It may be hypothesised that the extreme thermal shock may introduce some decohesion between fibre/matrix interface especially when the gradient is
positive in thermal shock
Detection of Far-Infrared Water Vapor, Hydroxyl, and Carbon Monoxide Emissions from the Supernova Remnant 3C 391
We report the detection of shock-excited far-infrared emission of H2O, OH,
and CO from the supernova remnant 3C 391, using the ISO Long-Wavelength
Spectrometer. This is the first detection of thermal H2O and OH emission from a
supernova remnant. For two other remnants, W~28 and W~44, CO emission was
detected but OH was only detected in absorption. The observed H2O and OH
emission lines arise from levels within ~400 K of the ground state, consistent
with collisional excitation in warm, dense gas created after the passage of the
shock front through the dense clumps in the pre-shock cloud. The post-shock gas
we observe has a density ~2x10^5 cm^{-3} and temperature 100-1000 K, and the
relative abundances of CO:OH:H2O in the emitting region are 100:1:7 for a
temperature of 200 K. The presence of a significant column of warm H2O suggests
that the chemistry has been significantly changed by the shock. The existence
of significant column densities of both OH and H2O, which is at odds with
models for non-dissociative shocks into dense gas, could be due to
photodissociation of H2O or a mix of fast and slow shocks through regions with
different pre-shock density.Comment: AASTeX manuscript and 4 postscript figure
Colloid-stabilized emulsions: behaviour as the interfacial tension is reduced
We present confocal microscopy studies of novel particle-stabilized
emulsions. The novelty arises because the immiscible fluids have an accessible
upper critical solution temperature. The emulsions have been created by
beginning with particles dispersed in the single-fluid phase. On cooling,
regions of the minority phase nucleate. While coarsening these nuclei become
coated with particles due to the associated reduction in interfacial energy.
The resulting emulsion is arrested, and the particle-coated interfaces have
intriguing properties. Having made use of the binary-fluid phase diagram to
create the emulsion we then make use of it to study the properties of the
interfaces. As the emulsion is re-heated toward the single-fluid phase the
interfacial tension falls and the volume of the dispersed phase drops.
Crumpling, fracture or coalescence can follow. The results show that the
elasticity of the interfaces has a controlling influence over the emulsion
behaviour.Comment: Submitted for the proceedings of the 6th Liquid Matter Conference,
held in Utrecht (NL) in July 200
A New Look At Carbon Abundances In Planetary Nebulae. III. DDDM1, IC 3568, IC4593, NGC 6210, NGC 6720, NGC 6826, & NGC 7009
This paper is the third in a series reporting on a study of carbon abundances
in a carefully chosen sample of planetary nebulae representing a large range in
progenitor mass and metallicity. We make use of the IUE Final Archive database
containing consistently-reduced spectra to measure line strengths of C III]
1909 along with numerous other UV lines for the planetary nebulae DDDM1, IC
3568, IC 4593, NGC 6210, NGC 6720, NGC 6826, & NGC 7009. We combine the IUE
data with line strengths from optical spectra obtained specifically to match
the IUE slit positions as closely as possible, to determine values for the
abundance ratios He/H, O/H, C/O, N/O, and Ne/O. The ratio of C III] 1909/C II
4267 is found to be effective for merging UV and optical spectra when He II
1640/4686 is unavailable. Our abundance determination method includes a 5-level
program whose results are fine-tuned by corrections derived from detailed
photoionization models constrained by the same set of emission lines. All
objects appear to have subsolar levels of O/H, and all but one show N/O levels
above solar. In addition, the seven planetary nebulae span a broad range in C/O
values. We infer that many of our objects are matter bounded, and thus the
standard ionization correction factor for N/O may be inappropriate for these
PNe. Finally, we estimate C/O using both collisionally-excited and
recombination lines associated with C+2 and find the well established result
that abundances from recombination lines usually exceed those from
collisionally-excited lines by several times.Comment: 36 pages, 7 tables, 2 figures, latex. Tables and figures supplied as
two separate postscript files. Accepted for publication in Ap
The Slowly Formed Guiselin Brush
We study polymer layers formed by irreversible adsorption from a polymer
melt. Our theory describes an experiment which is a ``slow'' version of that
proposed by Guiselin [Europhys. Lett., v. 17 (1992) p. 225] who considered
instantaneously irreversibly adsorbing chains and predicted a universal density
profile of the layer after swelling with solvent to produce the ``Guiselin
brush.'' Here we ask what happens when adsorption is not instantaneous. The
classic example is chemisorption. In this case the brush is formed slowly and
the final structure depends on the experiment's duration, . We find
the swollen layer consists of an inner region of thickness with approximately constant density and an outer region
extending up to height which has the same density decay as for the Guiselin case.Comment: 7 pages, submitted to Europhysics Letter
ISO LWS Spectroscopy of M82: A Unified Evolutionary Model
We present the first complete far-infrared spectrum (43 to 197 um) of M82,
the brightest infrared galaxy in the sky, taken with the Long Wavelength
Spectrometer of the Infrared Space Observatory (ISO). We detected seven fine
structure emission lines, [OI] 63 and 145 um, [OIII] 52 and 88 um, [NII] 122
um, [NIII] 57 um and [CII] 158 um, and fit their ratios to a combination
starburst and photo-dissociation region (PDR) model. The best fit is obtained
with HII regions with n = 250 cm^{-3} and an ionization parameter of 10^{-3.5}
and PDRs with n = 10^{3.3} cm^{-3} and a far-ultraviolet flux of G_o =
10^{2.8}. We applied both continuous and instantaneous starburst models, with
our best fit being a 3-5 Myr old instantaneous burst model with a 100 M_o
cut-off. We also detected the ground state rotational line of OH in absorption
at 119.4 um. No excited level OH transitions are apparent, indicating that the
OH is almost entirely in its ground state with a column density ~ 4x10^{14}
cm^{-2}. The spectral energy distribution over the LWS wavelength range is well
fit with a 48 K dust temperature and an optical depth, tau_{Dust} proportional
to lambda^{-1}.Comment: 23 pages, 4 figures, accepted by ApJ, Feb. 1, 199
- …