The performance of Detainment Bunds (DBs) for attenuating phosphorus and sediment loss from pastoral farmland

New Zealand relies upon phosphorus (P) to sustain agricultural productivity. However, P loss from farming systems to freshwater ecosystems can promote eutrophication; a global problem. A disproportionate amount of P and sediment is transported from farm systems to freshwaters via ephemeral streams (overland flow) during short of periods of time. Ephemeral streams flow over landscapes (e.g. depressions in paddocks which are usually dry) during intense rainfall events which produce surface runoff. Treating the sheer volume of water leaving a catchment during these events presents a challenge and many mitigation approaches struggle to cope with such large discharges over short periods of time. The objective of this MSc research was to quantify the performance of a new type of detainment bund (DB) being trialled in the Lake Rotorua catchment that was designed to intercept surface runoff by ponding it behind a low profile earth bund (c. 1.5 m high). The aim was to promote settling of suspended sediments and associated particulate P (PP) in the DB basin (onto the pasture). Ponded water was released slowly (via a floating decant structure) until the pond was completely drained; residence time of water was no more than three days to ensure pastoral production in the ponding area was maintained. Three detainment bunds were constructed on private dairy farms within three sub catchments (Waiteti, Hauraki and Awahou) of Lake Rotorua (Bay of Plenty, New Zealand). The DBs have been initiated as part of a collaboration of Bay of Plenty Regional Council, DairyNZ and Rotorua catchment farmers in a wider P mitigation programme known as the ‘Rotorua P-Project’. Sampling was undertaken from March - September 2012 during which eight rainfall events produced ponding in the DBs. Synthetic grass mats and sediment trays were deployed across the ponding area of each DB to capture sediments which were deposited during ponding periods. Grab samples of in– and out– flowing water were collected at various stages during storm events and analysed for total suspended sediments (TSS), particle size distribution, total P (TP), dissolved reactive P (DRP), total nitrogen (TN) and dissolved inorganic nitrogen to determine changes in water quality over the ponding periods. Water level was recorded to calculate the volume of ponded water and estimates of the mass of sediment and P deposited per event were derived. Total P concentrations of up to 1.6 mg L⁻¹ were recorded in ephemeral stream flow. Results showed that there were significant reductions in TSS concentrations throughout the ponding events. The fastest settling rate (73% reduction in TSS over 43 h) occurred when ponded water comprised a large percentage inorganic material, slower settling rates were associated with high % of organic SS. Particulate nutrient concentrations of water leaving the DBs decreased at fastest rates within the first 20 h of ponding (up to 36% of PP and 42% of PN at Awahou DB) when TSS concentrations were high (>100 mg L⁻¹). Similar reductions were observed at the other sites (with lower TSS) but settling rates were typically half this maximum observed rate. The sediment retained by the three DBs in this study was enriched with P (average 2080 mg P (kg dw) ⁻¹) relative to the benthic sediments of Lake Rotorua and the alluvium of the Waiteti Stream. Phosphorus in the deposited sediments was associated with metal cations such as Fe and Mn; this indicates that such PP which is present in redox–sensitive forms is potentially bioavailable in Lake Rotorua during periods of lake stratification which lead to anoxia in the hypolimnion. The largest retention of sediment and P (2,749 kg and 6.08 kg respectively) during the study period occurred when a large rainfall and runoff event in July coincided with the recent complete removal of vegetation in an upstream paddock sown with a winter forage crop. The setting of the Hauraki DB was the most representative of a typical dairy farm and the average deposition per sampled event was 0.261 kg P⁻¹. Using this figure it was estimated, that over a 20 year period, 28 kg of P could be retained (given the same hydrological and catchment characteristics as 2012). This equates to a saving of c. $28,000 if the P was to be removed by in-lake restoration methods. Detainment bunds did not attenuate dissolved nutrients (DRP and DN) during ponding in most cases; however, DRP was inversely correlated with TSS when the TSS concentrations were high. In some ponding events DRP increased, this was likely due to net desorption from suspended sediments. An investigation of the soil P concentrations around the ponding area of an old (12 y) detainment dam built for flood control revealed a significant decrease in Olsen P with distance from the dam wall, indicating that historic ponding had deposited sediment enriched with P in the ponding area (Olsen P ranged from 119 mg L⁻¹ inside to 41 mg L⁻¹ outside of the ponding area). There is a potential for DB ponding areas to be a P source at certain times if DRP is desorbed from P enriched soils to overlying water, however, in the long term the investigation indicated that they are likely to be a P sink and there may be no need for addition of P fertiliser in the ponding area. Adequate water storage capacity was identified as critical to the design of future DBs. Observations during this research showed that storage ratios should be based on a minimum ratio of 120 m³ of water storage per 1 ha of contributing catchment (to the concrete riser). It is important that the floating decant structures used to drain DBs are designed specifically for the volume of each DB to allow ponded water to drain from the DB within the desired time of ponding. Land owners have tolerated three days ponding with no impact on pastoral production. Detainment bunds can play a pivotal role in moderating the hydrological pathways at the catchment scale by prioritising headwater catchments and slowing down water flow to reduce the loss of nutrients and sediment from pastoral farmland during intense rainfall and runoff events. The level of DB implementation within pastoral landscapes will depend on the willingness of landowners to incorporate them into farm systems. A win-win situation is possible where water quality is improved and pastoral production within the ponding areas is maintained

Enhancing intrusion resilience in publicly accessible distributed systems

PhD ThesisThe internet is increasingly used as a means of communication by many businesses. Online shopping has become an important commercial activity and many governmental bodies offer services online. Malicious intrusion into these systems can have major negative consequences, both for the providers and users of these services. The need to protect against malicious intrusion, coupled with the difficulty of identifying and removing all possible vulnerabilities in a distributed system, have led to the use of systems that can tolerate intrusions with no loss of integrity. These systems require that services be replicated as deterministic state machines, a relatively hard task in practice, and do not ensure that confidentiality is maintained when one or more replicas are successfully intruded into. This thesis presents FORTRESS, a novel intrusion-resilient system that makes use of proactive obfuscation techniques and cheap off-the-shelf hardware to enhance intrusionresilience. FORTRESS uses proxies to prevent clients accessing servers directly, and regular replacement of proxies and servers with differently obfuscated versions. This maintains both confidentiality and integrity as long as an attacker does not compromise the system as a whole. The expected lifetime until system compromise of the FORTRESS system is compared to those of state machine replicated and primary backup systems when confronted with an attacker capable of launching distributed attacks against known vulnerabilities. Thus, FORTRESS is demonstrated to be a viable alternative to building intrusion-tolerant systems using deterministic state machine replication. The performance overhead of the FORTRESS system is also evaluated, using both a general state transfer framework for distributed systems, and a lightweight framework for large scale web applications. This shows the FORTRESS system has a sufficiently small performance overhead to be of practical use

The relationship between sediment composition and infaunal polychaete communities along the southern coast of Namibia

Magister Scientiae - MScThis study examined the relationship between sediment structure and infaunal polychaete communities off the southern coast of Namibia from two separate sets of data, and a total of ninety-two samples. It also examined whether a selected group of organisms (polychaetes) could provide the same level of information regarding community structure, as the entire fauna, at a number of taxonomic resolutions. A total of 44 samples were collected by De Beers Marine (Pty) Ltd in 1999 off the southern coast of Luderitz from depths between 40 m and 90 m. The sediments varied from soft muds (45 μm) to gravel (> 710 μm). Forty-three morpho species of polychaetes were distinguished, of which only 28 known species of polychaetes could be positively identified, which suggests that more information on the diversity of polychaetes in the region is needed. The fauna was dominated by species in the Ampharetidae, Capitellidae, Maldanidae, Spionidae, Lumbrineridae, Flabilligeridae, Nephtyidae, Pectinariidae and Onuphidae. Multi-variate analyses using PRIMER indicated that communities were structured by mud (45 μm) and very fine sand (45 - 63 μm) and gravel (> 710 μm). Mud and gravel, although selected by the BIOENV procedure as accounting for some of the variation in the polychaete assemblage structure, explained no more of the data (in combination) than did mud on its own. As similar clustering of samples was observed when the data were analysed at both the family and species-level, suggesting that the same level of information was being gained at the two taxonomic levels. The results of the BIOENV analyses were also broadly similar for both taxonomic levels of analyses, in terms of both the proportion of the variation in assemblage structure explained by the selected environmental variables and the choice of selected variables. These results suggested the information gathered at the polychaete family-level were equally clear when they are collected at the family-level for the entire infauna. The use of polychaetes (to the family-level) as surrogates, using sediment structure and depth was independently investigated from a total of 48 samples that were collected by De Beers Marine (Pty) Ltd in 2001, from depths between 20 m and 110 m. The sediment varied from mud ( 710 μm). Twenty-two families of polychaetes were distinguished, the fauna showing an abundance of Capitellidae, Cirratulidae, Flabilligeridae, Lumbrineridae, Magelonidae, Nephtyidae, Paraonidae, Pilargiidae, Onuphidae, Syllidae and Spionidae. Striking differences were found in the amount of variation accounted for in the biological samples by the environmental data. Interestingly, depth in combination with a particular sediment size fraction featured very strongly in structuring both sets of communities. The biotic patterns in the family-level total infauna were not similar for the polychaetes (at the same taxonomic resolution). These results suggested that one group of organisms (polychaetes at the family-level) may not be useful as a proxy for the entire infauna (at the family-level). Because of the contrasting results that were obtained in 1999 and 2001, the biological data in 1999 were pooled and the environmental data (sediment size fractions) were adjusted accordingly (i.e. some of the differences in the results may reflect differences in the methods used to collect data). Consequently the results still did not adequately explain why there was a low level of similarity between the total infauna and polychaete family-level biotic patterns in 2001. It seemed that pooled data improved the taxonomic resolution (amount of variation obtained), but when the sediment size fraction data were adjusted, it lowered the amount of taxonomic resolution. The results suggest that comprehensive and standardized samples must be collected to fully understand the relationships between biotic patterns and environmental variables. This is potentially important given the costs involved and the potentially long lasting value of the material collected. These sediment and biological samples were collected by industry (for baseline biological monitoring in the mining industry, and not academic purposes). Proper protocols need to be established which allow industry-related monitoring programs to make a real contribution to our understanding of the biodiversity and ecology of the area.South Afric

Verifiable Classroom Voting in Practice

Classroom voting is an important pedagogical technique in which students learn by voting on the answers to questions. The same voting platform is also often used for exercises such as rating lecturer performance and voting for prizes. In this paper, we present VCV, an end-to-end (E2E) verifiable classroom voting system built based on the DRE-i protocol. Our system provides E2E verifiability without tallying authorities; it supports voting through mobile phones with constrained computing resources; it reports the tallying results instantly after voting is finished along with cryptographic proofs that enable the public to verify the tallying integrity. Since 2013, the VCV system has been used regularly in real classroom teaching, as well as academic prize competitions, in Newcastle University with positive user feedback. Our experience suggests that E2E verifiable voting through the internet and using mobile phones is feasible for daily routine activities such as classroom voting

OpenEarable:Open Hardware Earable Sensing Platform

Earables are ear-worn devices that offer functionalities beyond basic audio in- and output. In this paper we present the ongoing development of a new, open-source, Arduino-based earable platform called OpenEarable. It is based on standard components, is easy to manufacture and costs roughly $40 per device at batch size ten. We present the first version of the device which is equipped with a series of sensors and actuators: a 3-axis accelerometer and gyroscope, an ear canal pressure and temperature sensor, an inward facing ultrasonic microphone as well as a speaker, a push button, and a controllable LED. We demonstrate the versatility of the prototyping platform through three different example application scenarios. In sum, OpenEarable offers a general-purpose, open sensing platform for earable research and development.<br/

A new species of Magelona (Polychaeta: Magelonidae) from southern Namibia

A new species of Magelonidae, Magelona debeerei sp. nov., is described and illustrated from grab-samples collected at <100moff the southwest coast of Africa. Magelona debeerei sp. nov. has previously been identified from the region as M. papillicornis (Müller, 1858) by Day (1955, 1961, 1967) but differs from M. papillicornis sensu stricto by possessing dorsal medial lobes on chaetigers 4–8 and lateral pouches (Σ configuration) between chaetigers 10 and 11. Three species of Magelona have now been recorded from southern Africa (M. capensis Day, 1961, M. cincta Ehlers, 1908 and M. debeerei sp. nov.), and a key to Magelona from this region is provided

Authenticated Key Exchange over Bitcoin

Bitcoin is designed to protect user anonymity (or pseudonymity) in a financial transaction, and has been increasingly adopted by major e- commerce websites such as Dell, PayPal and Expedia. While the anonymity of Bitcoin transactions has been extensively studied, little attention has been paid to the security of post-transaction correspondence. In a commercial ap- plication, the merchant and the user often need to engage in follow-up corre- spondence after a Bitcoin transaction is completed, e.g., to acknowledge the receipt of payment, to confirm the billing address, to arrange the product de- livery, to discuss refund and so on. Currently, such follow-up correspondence is typically done in plaintext via email with no guarantee on confidentiality. Obviously, leakage of sensitive data from the correspondence (e.g., billing ad- dress) can trivially compromise the anonymity of Bitcoin users. In this paper, we initiate the first study on how to realise end-to-end secure communica- tion between Bitcoin users in a post-transaction scenario without requiring any trusted third party or additional authentication credentials. This is an important new area that has not been covered by any IEEE or ISO/IEC se- curity standard, as none of the existing PKI-based or password-based AKE schemes are suitable for the purpose. Instead, our idea is to leverage the Bit- coin’s append-only ledger as an additional layer of authentication between previously confirmed transactions. This naturally leads to a new category of AKE protocols that bootstrap trust entirely from the block chain. We call this new category “Bitcoin-based AKE” and present two concrete protocols: one is non-interactive with no forward secrecy, while the other is interactive with additional guarantee of forward secrecy. Finally, we present proof-of-concept prototypes for both protocols with experimental results to demonstrate their practical feasibility

Challenging the Perceptions of Human Tendon Allografts: Influence of Donor Age, Sex, Height, and Tendon on Biomechanical Properties

Background: The use of allograft tendons has increased for primary and revision anterior cruciate ligament reconstruction, but allograft supply is currently limited to a narrow range of tendons and donors up to the age of 65 years. Expanding the range of donors and tendons could help offset an increasing clinical demand. Purpose: To investigate the effects of donor age, sex, height, and specific tendon on the mechanical properties of a range of human lower leg tendons. Study Design: Descriptive laboratory study. Methods: Nine tendons were retrieved from 39 fresh-frozen human cadaveric lower legs (35 donors [13 female, 22 male]; age, 49-99 years; height, 57-85 inches [145-216 cm]) including: Achilles tendon, tibialis posterior and anterior, fibularis longus and brevis, flexor and extensor hallucis longus, plantaris, and flexor digitorum longus. Tendons underwent tensile loading to failure measuring cross-sectional area (CSA), maximum load, strain at failure, ultimate tensile strength, and elastic modulus. Results from 332 tendons were analyzed using mixed-effects linear regression, accounting for donor age, sex, height, and weight. Results: Mechanical properties were significantly different among tendons and were substantially greater than the effects of donor characteristics. Significant effects of donor sex, age, and height were limited to specific tendons: Achilles tendon, tibialis posterior, and tibialis anterior. All other tendons were unaffected. The Achilles tendon was most influenced by donor variables: greater CSA in men (β = 15.45 mm2; Šidák adjusted P < .0001), decreased maximum load with each year of increased age (β = −17.20 N per year; adjusted P = .0253), and increased CSA (β = 1.92 mm2 per inch; adjusted P < .0001) and maximum load (β = 86.40 N per inch; adjusted P < .0001) with each inch of increased height. Conclusion: Mechanical properties vary significantly across different human tendons. The effects of donor age, sex, and height are relatively small, are limited to specific tendons, and affect different tendons uniquely. The findings indicate that age negatively affected only the Achilles tendon (maximum load) and challenge the exclusion of donors aged >65 years across all tendon grafts. Clinical Relevance: The findings support including a broader range of tendons for use as allografts for anterior cruciate ligament reconstruction and reviewing the current exclusion criterion of donors aged >65 years