Generation of polarization entangled photon pairs by a single crystal interferometric source pumped by femtosecond laser pulses

Photon pairs, highly entangled in polarization have been generated under femtosecond laser pulse excitation by a type I crystal source, operating in a single arm interferometric scheme. The relevant effects of temporal walk-off existing in these conditions between the ordinary and extraordinary photons were experimentally investigated. By introducing a suitable temporal compensation between the two orthogonal polarization components highly entangled pulsed states were obtained

Polyhydroxyalkanoate (PHA): Review of synthesis, characteristics, processing and potential applications in packaging

Polyhydroxyalkanoates (PHAs) are gaining increasing attention in the biodegradable polymer market due to their promising properties such as high biodegradability in different environments, not just in composting plants, and processing versatility. Indeed among biopolymers, these biogenic polyesters represent a potential sustainable replacement for fossil fuel-based thermoplastics. Most commercially available PHAs are obtained with pure microbial cultures grown on renewable feedstocks (i.e. glucose) under sterile conditions but recent research studies focus on the use of wastes as growth media. PHA can be extracted from the bacteria cell and then formulated and processed by extrusion for production of rigid and flexible plastic suitable not just for the most assessed medical applications but also considered for applications including packaging, moulded goods, paper coatings, non-woven fabrics, adhesives, films and performance additives. The present paper reviews the different classes of PHAs, their main properties, processing aspects, commercially available ones, as well as limitations and related improvements being researched, with specific focus on potential applications of PHAs in packaging

Generating qudits with d=3,4 encoded on two-photon states

We present an experimental method to engineer arbitrary pure states of qudits with d=3,4 using linear optics and a single nonlinear crystal.Comment: 4 pages, 1 eps figure. Minor changes. The title has been changed for publication on Physical Review

Experimental generation of complex noisy photonic entanglement

We present an experimental scheme based on spontaneous parametric down-conversion to produce multiple photon pairs in maximally entangled polarization states using an arrangement of two type-I nonlinear crystals. By introducing correlated polarization noise in the paths of the generated photons we prepare mixed entangled states whose properties illustrate fundamental results obtained recently in quantum information theory, in particular those concerning bound entanglement and privacy.Comment: 12 pages, 3 figure

"All-versus-nothing" nonlocality test of quantum mechanics by two-photon hyperentanglement

We report the experimental realization and the characterization of polarization and momentum hyperentangled two photon states, generated by a new parametric source of correlated photon pairs. By adoption of these states an "all versus nothing" test of quantum mechanics was performed. The two photon hyperentangled states are expected to find at an increasing rate a widespread application in state engineering and quantum information. PACS: 03.65.Ud, 03.67.Mn, 42.65. LmComment: Replaced with published versio

PHB-rich biomass and BioH2 production by means of photosynthetic microorganisms

Polyhydroxyalkanoates (PHAs) are a family of biopolyesters produced by many bacteria as intracellular storage carbon and energy source. Poly-β-hydroxybutyrate (PHB) is probably the most common type of PHA. It is biodegradable and renewable, with relevant thermoplastic properties along with adjustable thermal and mechanical properties. The thermoplastic properties of PHB and its biodegradability make it a potential alternative to petroleum-based plastics. Several microorganisms growing in the dark and/or in the light produce PHB. The polymer is mainly accumulated in the cytoplasm of cells when microorganisms are growing under conditions of stress. If purple non-sulfur photosynthetic bacteria (PNSB) are grown under nitrogen starvation conditions, a photoevolution of molecular hydrogen occurs as well. The PHB amount increases when carbon and energy sources are in excess, but the growth is limited, for example, by the lack of a nitrogen, phosphorous or sulfur source. This work deals the possibility of producing PHAs by photosynthetic microorganisms belonging to cyanobacteria and PNSB. Different culture broths, with and without organic carbon sources, were investigated to maximize PHA production by photosynthetic microorganisms. An unbalanced agro-industrial wastewater has been also investigated in the present study. It concerns the olive mill wastewater (OMW) containing significant reusable carbon fractions suitable for an eco-efficient valorization by feeding photosynthetic processes. The maximum PHA concentration in a cyanobacterium drybiomass was 317 mg/L, when growing cells in a medium with a low content of acetic acid (LAC). In PNSB drybiomass the maximum PHB content was 215 mg/L, when growing PNSB in a synthetic medium. A simultaneous H2 co-production (1,295 mL/L of culture) was cumulated as well, at the end of the process

Thermoplastic Blends Based on Poly(Butylene Succinate-co-Adipate) and Different Collagen Hydrolysates from Tanning Industry: I—Processing and Thermo-mechanical Properties

In this study, blends of a biodegradable thermoplastic polyester, poly (butylene succinate-co-adipate) (PBSA) with two different raw hydrolyzed collagens (HCs), derived from the tannery industry, were investigated in terms of processability, rheological, thermal and mechanical properties. HCs, obtained by alkaline (HCa) and enzymatic (HCe) hydrolysis of the solid wastes generated during the shaving of the tanned leather, were used in PBSA/HC blends, up to 20 wt% of HC, produced by melting extrusion and processed by injection molding. All the blends up to 20 wt% HCs resulted suitable for the injection molding obtaining flexible molded specimens with good tensile properties. The different secondary structure of the two HCs influenced the rheology, morphology and mechanical properties of the produced blends. In particular, HCa, due its higher content of oligopeptides and free amino-acids, showed a good compatibility with the polymeric matrix acting as a plasticizer with consequent reduction of melt viscosity with increasing its loading. The molded dog-bones specimens containing 20 wt% HCa showed a value of elongation at break of 810%. While, HCe, due its higher presence of b-sheet structures, behaved as organic filler, showing a poor interfacial interaction with PBSA with consequent decrease of the tensile properties with increasing its loading. The good processability and satisfactory mechanical properties obtained encourage the use of both investigated collagen hydrolysates in the production of thermoplastic blends and relative molded products for applications in agriculture and plant nurseries, such as pots or small containers with fertilizing properties, due the presence of HCs

Relationship between systolic time intervals and arterial blood pressure.

It has been suggested that systolic time intervals (STI) can be used to monitor the cardiac effects of antihypertensive treatments and also to evaluate hypertensive patients. STI changes observed in hypertensives have been ascribed to myocardial disease, although they could be due to the existence of a relationship between STI and blood pressure. A group of 37 subjects (18 normotensives and 19 hypertensives) with no signs of heart failure and left ventricular dysfunction were studied to examine the relationship of STI to blood pressure. Pacing with an external battery pulse generator was performed at the rate of 95 beats/min in order to eliminate differences in heart rate. STI were measured from good quality high speed (100 mm/s) recordings and the average value of 10 consecutive cardiac cycles was used for statistical analysis. Normal subjects showed significantly lower values of pre-ejection period (PEP), electromechanical systole (QS2), and pre-ejection period/left ventricular ejection time ratio (PEP/LVET). Moreover, a significant inverse relationship between diastolic pressure and LVET and significant direct relationships between diastolic pressure and PEP, systolic pressure and PEP, diastolic pressure and PEP/LVET, and between systolic pressure and PEP/LVET were demonstrated. We suggest to consider the relation of STI to blood pressure to provide regression equations to best appreciate and use STI

Evaluation of mechanical and interfacial properties of bio-composites based on poly(lactic acid) with natural cellulose fibers

The circular economy policy and the interest for sustainable material are inducing a constant expansion of the bio-composites market. The opportunity of using natural fibers in bio-based and biodegradable polymeric matrices, derived from industrial and/or agricultural waste, represents a stimulating challenge in the replacement of traditional composites based on fossil sources. The coupling of bioplastics with natural fibers in order to lower costs and promote degradability is one of the primary objectives of research, above all in the packaging and agricultural sectors where large amounts of non-recyclable plastics are generated, inducing a serious problem for plastic disposal and potential accumulation in the environment. Among biopolymers, poly(lactic acid) (PLA) is one of the most used compostable, bio-based polymeric matrices, since it exhibits process ability and mechanical properties compatible with a wide range of applications. In this study, two types of cellulosic fibers were processed with PLA in order to obtain bio-composites with different percentages of microfibers (5%, 10%, 20%). The mechanical properties were evaluated (tensile and impact test), and analytical models were applied in order to estimate the adhesion between matrix and fibers and to predict the material's stiffness. Understanding these properties is of particular importance in order to be able to tune and project the final characteristics of bio-composites