Efficiency and Stability Enhancement in Perovskite Solar Cells by Inserting Lithium-Neutralized Graphene Oxide as Electron Transporting Layer

This work proposes a new perovskite solar cell structure by including lithium-neutralized graphene oxide (GO-Li) as the electron transporting layer (ETL) on top of the mesoporous TiO2 (m-TiO2) substrate. The modified work-function of GO after the intercalation of Li atoms (4.3 eV) exhibits a good energy matching with the TiO2 conduction band, leading to a significant enhancement of the electron injection from the perovskite to the m-TiO2. The resulting devices exhibit an improved short circuit current and fill factor and a reduced hysteresis. Furthermore, the GO-Li ETL partially passivates the oxygen vacancies/defects of m-TiO2 by resulting in an enhanced stability under prolonged 1 SUN irradiation

Efficient fully blade-coated perovskite solar cells in air with nanometer-thick bathocuproine buffer layer

Fully printed perovskite solar cells (PSCs) were fabricated in air with all constituent layers, except for electrodes, deposited by the blade coating technique. The PSCs incorporated, for the first time, a nanometer-thick printed bathocuproine (BCP) hole blocking buffer using blade coating and deposited at relative humidity up to 50%. The PSCs with a p-i-n structure (glass/indium tin oxide (ITO)/poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS)/CH3NH3PbI3/[6,6]-phenyl-C61-butyric acid methyl ester (PCBM)/BCP/Ag) delivered a maximum power conversion efficiency (PCE) of 14.9% on an active area of 0.5 cm2 when measured under standard test conditions. The PSCs with a blade coated BCP delivered performance of 10% and 63% higher (in relative terms) than those incorporating a spin coated BCP or without any BCP film, respectively. The atomic force microscopy (AFM) showed that blade coated films were more homogeneous and acted also as a surface planarizer leading to a reduction of roughness which improved BCP/Ag interface lowering charge recombination. The demonstration of 15% efficient devices with all constituent layers, including nanometer-thick BCP (∼ 10 nm), deposited by blade coating in air, demonstrates a route for industrialization of this technology

White light emitting silsesquioxane based materials: The importance of a ligand with rigid and directional arms

The synthesis of a novel polyhedral oligomeric silsesquioxane functionalized with eight rigid and directional terpyridine-based arms (Ter-POSS) was successfully achieved via a Sonogashira reaction. The POSS based ligand was extensively characterized using different techniques including 1H, 13C and 29Si NMR as well as UV-Vis and fluorescence spectroscopies. The assembly of these nano-caged units in the presence of different transition metal ions (Fe2+, Zn2+ and Cu2+) as well as of a cation from the lanthanides (Eu3+) was investigated using absorption and emission spectroscopies. The final materials display an evident emission in different regions of the visible spectrum as a function of the cation employed. Additional insights into the structural organization of Ter-POSS in the presence of metal cations were obtained via molecular mechanics and molecular dynamics simulations. The polymeric material resulting from the complexation with europium displays a white light emission ascribed to the presence of combined contributions from the blue, green and red regions. The final self-assembled organizations display an increased quantum yield with the highest value (29.6%) obtained in the presence of Zn2+. Moreover, the white-light emitting europium-based nanostructure exhibits one of the highest quantum yields reported in the literature for similar solids

A REPLICABLE OPEN-SOURCE MULTI-CAMERA SYSTEM FOR LOW-COST 4D GLACIER MONITORING

Image-based monitoring has emerged as a prevalent technique for sensing mountain environments. Monoscopic time-lapse cameras, which rely on digital image correlation to quantify glacier motion, have limitations due to the need for a Digital Elevation Model for deriving 3D flow velocity fields. Multi-camera systems overcome this limitation, as they allow for a 3D reconstruction of the scene. This paper presents a replicable low-cost stereoscopic system designed for 4D glacier monitoring. The system consists of independent and autonomous units, built from off-the-shelves components, such as a DSLR camera, an Arduino microcontroller, and a Raspberry Pi Zero, reducing costs compared to pre-built time-lapse cameras. The units are energetically self-sufficient and resistant to harsh alpine conditions. The system was successfully tested for more than a year to monitor the northwest terminus of the Belvedere Glacier (Italian Alps). Daily stereo-pairs acquired were processed with Structure-from-Motion to derive 3D point clouds of the glacier terminus and estimate glacier retreat and ice volume loss. By combining the information about ice volume loss with ablation estimates and ice flow velocity information, e.g., derived from monoscopic-camera time series, a multi-camera system enables a comprehensive understanding of sub-seasonal glacier dynamics

Rich Environments for Active Open Distance Learning: Looks Good in Theory But is it Really What Learners Want?

In the open distance learning environment, efforts are made to engage students and provide rich environments for active learning (REALs). This article describes exploratory research undertaken on a fourth-year Tourism Management module. The research investigated two different study guides for different years – 2012 students using an innovative guide with learner engagement tools designed in line with current learning theory, to achieve a REAL; and 2011 learners using a traditional study guide with far fewer engagement tools. The two consecutive cohorts completed a quantitative survey designed from theory on learner engagement, motivation and interactivity. The survey investigated learners’ experiences of the implementation of four constructs, namely course design; engagement; learning activities; and the integrated construct of relevance, application, bonding and ownership. Data analysis was conducted using descriptive statistics, non-parametric correlations and cross-tabulations. Results suggest that this REAL does aid learning but not to the extent anticipated, and that it may be too rich. In light of the greater debate regarding the design of ODL material to maximise learning, recommendations are made to discerningly regulate the richness and depth of learning material, avoid overload of isolated learners, and gradually introduce REALs.Transport Economics, Logistics and Touris

Massive facial edema and airway obstruction secondary to acute postoperative sialadenitis or "anesthesia mumps": a case report

This is an Open Access article distributed under the terms of the Creative Commons Attribution Licens

An Interlaboratory Study on the Stability of All-Printable Hole Transport Material–Free Perovskite Solar Cells

Comparisons between different laboratories on long-term stability analyses of perovskite solar cells (PSCs) is still lacking in the literature. This work presents the results of an interlaboratory study conducted between five laboratories from four countries. Carbon-based PSCs are prepared by screen printing, encapsulated, and sent to different laboratories across Europe to assess their stability by the application of three ISOS aging protocols: (a) in the dark (ISOS-D), (b) under simulated sunlight (ISOS-L), and (c) outdoors (ISOS-O). Over 1000 h stability is reported for devices in the dark, both at room temperature and at 65 degrees C. Under continuous illumination at open circuit, cells survive only for few hours, although they recover after being stored in the dark. Better stability is observed for cells biased at maximum power point under illumination. Finally, devices operate in outdoors for 30 days, with minor degradation, in two different locations (Barcelona, Spain and Paola, Malta). The findings demonstrate that open-circuit conditions are too severe for stability assessment and that the diurnal variation of the photovoltaic parameters reveals performance to be strongly limited by the fill factor, in the central hours of the day, due to the high series resistance of the carbon electrode

Minimum memory for generating rare events

We classify the rare events of structured, memoryful stochastic processes and use this to analyze sequential and parallel generators for these events. Given a stochastic process, we introduce a method to construct a process whose typical realizations are a given process' rare events. This leads to an expression for the minimum memory required to generate rare events. We then show that the recently discovered classical-quantum ambiguity of simplicity also occurs when comparing the structure of process fluctuations