Iron‐Mediated Electrophilic Amination of Organozinc Halides using Organic Azides

A wide range of alkyl‐, aryl‐ and heteroarylzinc halides were aminated with highly functionalized alkyl, aryl, and heterocyclic azides. The reaction proceeds smoothly at 50 °C within 1 h in the presence of FeCl3 (0.5 equiv) to furnish the corresponding secondary amines in good yields. This method was extended to peptidic azides and provided the arylated substrates with full retention of configuration. To demonstrate the utility of this reaction, we prepared two amine derivatives of pharmaceutical relevance using this iron‐mediated electrophilic amination as the key step

Commissioning of the CMS High Level Trigger

The CMS experiment will collect data from the proton-proton collisions delivered by the Large Hadron Collider (LHC) at a centre-of-mass energy up to 14 TeV. The CMS trigger system is designed to cope with unprecedented luminosities and LHC bunch-crossing rates up to 40 MHz. The unique CMS trigger architecture only employs two trigger levels. The Level-1 trigger is implemented using custom electronics, while the High Level Trigger (HLT) is based on software algorithms running on a large cluster of commercial processors, the Event Filter Farm. We present the major functionalities of the CMS High Level Trigger system as of the starting of LHC beams operations in September 2008. The validation of the HLT system in the online environment with Monte Carlo simulated data and its commissioning during cosmic rays data taking campaigns are discussed in detail. We conclude with the description of the HLT operations with the first circulating LHC beams before the incident occurred the 19th September 2008

CMS DAQ event builder based on Gigabit Ethernet

The CMS Data Acquisition System is designed to build and filter events originating from 476 detector data sources at a maximum trigger rate of 100 KHz. Different architectures and switch technologies have been evaluated to accomplish this purpose. Events will be built in two stages: the first stage will be a set of event builders called FED Builders. These will be based on Myrinet technology and will pre-assemble groups of about 8 data sources. The second stage will be a set of event builders called Readout Builders. These will perform the building of full events. A single Readout Builder will build events from 72 sources of 16 KB fragments at a rate of 12.5 KHz. In this paper we present the design of a Readout Builder based on TCP/IP over Gigabit Ethernet and the optimization that was required to achieve the design throughput. This optimization includes architecture of the Readout Builder, the setup of TCP/IP, and hardware selection

Infrastructures and Installation of the Compact Muon Solenoid Data Acquisition at CERN

At the time of this paper, all hardware elements of the CMS Data Acquisition System have been installed and commissioned both in the underground and surface areas. This paper describes in detail the infrastructures and the different steps that were necessary from the very beginning when the underground control rooms and surface building were building sites to a working system collecting data fragment from ~650 sources and sending them to surface for assembly and analysis

The CMS High Level Trigger System

The CMS Data Acquisition (DAQ) System relies on a purely software driven High Level Trigger (HLT) to reduce the full Level-1 accept rate of 100 kHz to approximately 100 Hz for archiving and later offline analysis. The HLT operates on the full information of events assembled by an event builder collecting detector data from the CMS front-end systems. The HLT software consists of a sequence of reconstruction and filtering modules executed on a farm of O(1000) CPUs built from commodity hardware. This paper presents the architecture of the CMS HLT, which integrates the CMS reconstruction framework in the online environment. The mechanisms to configure, control, and monitor the Filter Farm and the procedures to validate the filtering code within the DAQ environment are described

Dynamic configuration of the CMS Data Acquisition cluster

The CMS Data Acquisition cluster, which runs around 10000 applications, is configured dynamically at run time. XML configuration documents determine what applications are executed on each node and over what networks these applications communicate. Through this mechanism the DAQ System may be adapted to the required performance, partitioned in order to perform (test-) runs in parallel, or re-structured in case of hardware faults. This paper presents the CMS DAQ Configurator tool, which is used to generate comprehensive configurations of the CMS DAQ system based on a high-level description given by the user. Using a database of configuration templates and a database containing a detailed model of hardware modules, data and control links, nodes and the network topology, the tool automatically determines which applications are needed, on which nodes they should run, and over which networks the event traffic will flow. The tool computes application parameters and generates the XML configuration documents as well as the configuration of the run-control system. The performance of the tool and operational experience during CMS commissioning and the first LHC runs are discussed

On the Role of Attention in Binocular Rivalry: Electrophysiological Evidence

During binocular rivalry visual consciousness fluctuates between two dissimilar monocular images. We investigated the role of attention in this phenomenon by comparing event-related potentials (ERPs) when binocular-rivalry stimuli were attended with when they were unattended. Stimuli were dichoptic, orthogonal gratings that yielded binocular rivalry and dioptic, identically oriented gratings that yielded binocular fusion. Events were all possible orthogonal changes in orientation of one or both gratings. We had two attention conditions: In the attend-to-grating condition, participants had to report changes in perceived orientation, focussing their attention on the gratings. In the attend-to-fixation condition participants had to report changes in a central fixation target, taking attention away from the gratings. We found, surprisingly, that attending to rival gratings yielded a smaller ERP component (the N1, from 160–210 ms) than attending to the fixation target. To explain this paradoxical effect of attention, we propose that rivalry occurs in the attend-to-fixation condition (we found an ERP signature of rivalry in the form of a sustained negativity from 210–300 ms) but that the mechanism processing the stimulus changes is more adapted in the attend-to-grating condition than in the attend-to-fixation condition. This is consistent with the theory that adaptation gives rise to changes of visual consciousness during binocular rivalry

High Level Trigger Configuration and Handling of Trigger Tables in the CMS Filter Farm

The CMS experiment at the CERN Large Hadron Collider is currently being commissioned and is scheduled to collect the first pp collision data in 2008. CMS features a two-level trigger system. The Level-1 trigger, based on custom hardware, is designed to reduce the collision rate of 40 MHz to approximately 100 kHz. Data for events accepted by the Level-1 trigger are read out and assembled by an Event Builder. The High Level Trigger (HLT) employs a set of sophisticated software algorithms, to analyze the complete event information, and further reduce the accepted event rate for permanent storage and analysis. This paper describes the design and implementation of the HLT Configuration Management system. First experiences with commissioning of the HLT system are also reported