Functionally Graded Materials by Laser Metal Deposition

Fabrication of functionally graded materials (FGMs) by laser metal deposition (LMD) has the potential to offer solutions to key engineering problems over the traditional metal-working techniques. But the issues that need to be addressed while building FGMs are intermixing in the layers and cracking due to the residual stresses. This paper is to present the study of the effect of process parameters (laser power and travel speed) on the degree of dilution between the substrate (or, previous layer) and powder material for few metallurgical systems.Mechanical Engineerin

Functionally Graded Materials by Laser Metal Deposition (preprint)

Fabrication of functionally graded materials (FGMs) by laser metal deposition (LMD) has the potential to offer solutions to key engineering problems over the traditional metalworking techniques. But the issues that need to be addressed while building FGMs are intermixing in the layers and cracking due to the residual stresses. This paper is to present the study of the effect of process parameters (laser power and travel speed) on the degree of dilution between the substrate (or, previous layer) and powder material for few metallurgical systems

Applications of a Hybrid Manufacturing Process for Fabrication and Repair of Metallic Structures

Since its appearance, rapid prototyping technology has been of interest to various industries that are looking for a process to produce/build a part directly from a CAD model in a short time. Among them, the direct metal deposition process is the only process which directly manufactures a fully dense metal part without intermediate steps. However, challenges of the direct metal deposition process include building overhang structures, producing precision surfaces, and making parts with complex structures. Coupled between the additive and the subtractive processes into a single workstation, the integrated process, or hybrid process, can produce a metal part with machining accuracy and surface finish. Therefore, the hybrid process is potentially a very competitive process to fabricate and repair metallic structures. This paper summarizes the current development of the hybrid process to process high temperature metallic materials, including tool steel and Ti64. Research in simulation and modeling, process development, and actual part building and repair are discussed

Modeling and Simulation of a Laser Deposition Process

A laser deposition process involves the supply of metallic powders into a laser-heated spot where the powder is melted and forms a melt puddle which quickly solidifies into a bead. In order to design an effective system, the laser beam, the powder beam, and their interactions need to be fully understood. In this paper, the laser-material interaction within the melt pool is reported using a multi-scale model: A macroscopic model to model mass, heat, and momentum transfer. Experiments were also conducted to validate the simulation model

Interplay between Cell Migration and Neurite Outgrowth Determines SH2B1β-Enhanced Neurite Regeneration of Differentiated PC12 Cells

The regulation of neurite outgrowth is crucial in developing strategies to promote neurite regeneration after nerve injury and in degenerative diseases. In this study, we demonstrate that overexpression of an adaptor/scaffolding protein SH2B1β promotes neurite re-growth of differentiated PC12 cells, an established neuronal model, using wound healing (scraping) assays. Cell migration and the subsequent remodeling are crucial determinants during neurite regeneration. We provide evidence suggesting that overexpressing SH2B1β enhances protein kinase C (PKC)-dependent cell migration and phosphatidylinositol 3-kinase (PI3K)-AKT-, mitogen activated protein kinase (MAPK)/extracellular signal-regulated protein kinase (ERK) kinase (MEK)-ERK-dependent neurite re-growth. Our results further reveal a cross-talk between pathways involving PKC and ERK1/2 in regulating neurite re-growth and cell migration. We conclude that temporal regulation of cell migration and neurite outgrowth by SH2B1β contributes to the enhanced regeneration of differentiated PC12 cells

Evaluation of Direct Diode Laser Deposited Stainless Steel 316L on 4340 Steel Substrate for Aircraft Landing Gear Application

300M steel is used extensively for aircraft landing gears because of its high strength, ductility and toughness. However, like other high-strength steels, 300M steel is vulnerable to corrosion fatigue and stress corrosion cracking, which can lead to catastrophic consequences in the landing gear. Stainless steels offer a combination of corrosion, wear, and fatigue properties. But for an aircraft landing gear application a higher surface hardness is required. A laser cladding process with fast heating and cooling rates can improve the surface hardness. AISI 4340 steel is used as a lower cost alternative to 300M due to its similar composition. In this study, the influence of laser cladding process parameters, shield gas, and composition of the deposition and dilution zone has been investigated. The microstructures and composition analysis were evaluated by Scanning Electron Microscopy (SEM) and Optical Microscopy. The deposition hardness varies from 330HV to 600HV

Genome-Wide Association Study of Young-Onset Hypertension in the Han Chinese Population of Taiwan

Young-onset hypertension has a stronger genetic component than late-onset counterpart; thus, the identification of genes related to its susceptibility is a critical issue for the prevention and management of this disease. We carried out a two-stage association scan to map young-onset hypertension susceptibility genes. The first-stage analysis, a genome-wide association study, analyzed 175 matched case-control pairs; the second-stage analysis, a confirmatory association study, verified the results at the first stage based on a total of 1,008 patients and 1,008 controls. Single-locus association tests, multilocus association tests and pair-wise gene-gene interaction tests were performed to identify young-onset hypertension susceptibility genes. After considering stringent adjustments of multiple testing, gene annotation and single-nucleotide polymorphism (SNP) quality, four SNPs from two SNP triplets with strong association signals (−log10(p)>7) and 13 SNPs from 8 interactive SNP pairs with strong interactive signals (−log10(p)>8) were carefully re-examined. The confirmatory study verified the association for a SNP quartet 219 kb and 495 kb downstream of LOC344371 (a hypothetical gene) and RASGRP3 on chromosome 2p22.3, respectively. The latter has been implicated in the abnormal vascular responsiveness to endothelin-1 and angiotensin II in diabetic-hypertensive rats. Intrinsic synergy involving IMPG1 on chromosome 6q14.2-q15 was also verified. IMPG1 encodes interphotoreceptor matrix proteoglycan 1 which has cation binding capacity. The genes are novel hypertension targets identified in this first genome-wide hypertension association study of the Han Chinese population

Women with endometriosis have higher comorbidities: Analysis of domestic data in Taiwan

AbstractEndometriosis, defined by the presence of viable extrauterine endometrial glands and stroma, can grow or bleed cyclically, and possesses characteristics including a destructive, invasive, and metastatic nature. Since endometriosis may result in pelvic inflammation, adhesion, chronic pain, and infertility, and can progress to biologically malignant tumors, it is a long-term major health issue in women of reproductive age. In this review, we analyze the Taiwan domestic research addressing associations between endometriosis and other diseases. Concerning malignant tumors, we identified four studies on the links between endometriosis and ovarian cancer, one on breast cancer, two on endometrial cancer, one on colorectal cancer, and one on other malignancies, as well as one on associations between endometriosis and irritable bowel syndrome, one on links with migraine headache, three on links with pelvic inflammatory diseases, four on links with infertility, four on links with obesity, four on links with chronic liver disease, four on links with rheumatoid arthritis, four on links with chronic renal disease, five on links with diabetes mellitus, and five on links with cardiovascular diseases (hypertension, hyperlipidemia, etc.). The data available to date support that women with endometriosis might be at risk of some chronic illnesses and certain malignancies, although we consider the evidence for some comorbidities to be of low quality, for example, the association between colon cancer and adenomyosis/endometriosis. We still believe that the risk of comorbidity might be higher in women with endometriosis than that we supposed before. More research is needed to determine whether women with endometriosis are really at risk of these comorbidities