Advanced Technologies for Large-Sized OLED Display

Five years have passed, since the first 55″ full high-definition (FHD) OLED TV fabricated on Gen 8.5 glass was successfully launched into the TV market. For the time being, the size of OLED TV became diverse from 55″ to 77″, and the resolution was doubled into ultrahigh definition (UHD). The brightness and color gamut were enhanced, while the lower power consumption was realized. Utmost picture quality and slim form factor of OLED TV as well as the improved performance have made OLED TV recognized as the best premium TV. In this chapter, we describe the recent progress in three key technologies, which enable such an enhancement of performance in OLED TV, i.e., oxide thin-film transistor (TFT) and white organic light-emitting diode (WOLED), compensation circuit, and method to compensate the nonuniformity of oxide TFTs, OLED devices, and luminance

Fabrication of Complex 3D Micro-Scale Scaffolds and Drug Delivery Devices using Dynamic Mask Projection Microstereolithography

Microstereolithography (μSL) technology can fabricate three-dimensional (3D) tissue engineered scaffolds with controlled biochemical and mechanical micro-architectures. A μSL system for tissue engineering was developed using a Digital Micromirror Device (DMDTM) for dynamic pattern generation and an ultraviolet (UV) lamp filtered at 365 nm for crosslinking the photoreactive polymer solution. The μSL system was designed with x-y resolution of ~2 μm and a vertical (z) resolution of ~1 μm. To demonstrate the use of μSL in tissue engineering, poly(propylene fumarate) (PPF) was synthesized with a molecular weight of ~1200 Da. The viscosity of the PPF was reduced to ~150 cP (at 50 o C) by mixing with diethyl fumarate (DEF) in the ratio of 7:3 (w/w). Finally, ~2 % (w/w) of (bis(2,4,6- trimethylbenzoyl) phenylphosphine oxide (BAPO) was added to the solution to serve as a photoinitiator. Cure depth experiments were performed to determine the curing characteristics of the synthesized PPF, and the resulting system and photopolymer were used to construct a variety of 3D porous scaffolds with interconnected pores between 100 and 150 μm and a micro-needle array with height of ~800 μm and individual tip diameters of ~20 μm. SEM and microscope images of the micro-architectures illustrate that the developed μSL system is a promising technology for producing biodegradable and biocompatible microstructures.Mechanical Engineerin

Hydrogen effects on nanoindentation behavior of metallic glass ribbons

Recently, metallic glass (MG) membranes that are permeable to hydrogen have gained interest due to the increasing importance of hydrogen separation in a number of applications, e.g., hydrogen-powered fuel cells. An important issue in the context of MG membranes is the hydrogen-induced embrittlement and efforts to understand the role played by hydrogen in the mechanical properties, especially yielding and plastic deformation behavior, of MGs are being made. In this study, therefore, an attempt was made by performing nanoindentation tests with cube-corner and spherical indenter tips on a series of Ni–Nb–Zr amorphous alloy ribbons to investigate the hydrogen effects on nanohardness and pop-in behavior (Figure 1). Weight gain measurements after hydrogen charging and thermal desorption spectroscopy (TDS) studies (Figure 2) were utilized to identify how the total hydrogen is partitioned into mobile and immobile parts. These, in turn, indicate the significant role of hydrogen mobility in the amorphous structure on the mechanical properties. In high-Zr alloys containing immobile H, both hardness (H) and shear yielding stress (τmax) increase significantly; while in low-Zr alloys having only mobile hydrogen, decrease in hardness and τmax were noted (Figure 1). The changes in shear transformation zone (STZ) volume, estimated through cumulative analysis of τmax, caused by hydrogen absorption were also found to depend on hydrogen mobility such that immobile hydrogen reduces the STZ volume while mobile hydrogen increases it. *This research was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIP) (No. 2013R1A1A2A10058551)

Data of methylome and transcriptome derived from human dilated cardiomyopathy

AbstractAlterations in DNA methylation and gene expression have been implicated in the development of human dilated cardiomyopathy (DCM). Differentially methylated probes (DMPs) and differentially expressed genes (DEGs) were identified between the left ventricle (LV, a pathological locus for DCM) and the right ventricle (RV, a proxy for normal hearts). The data in this DiB are for supporting our report entitled “Methylome analysis reveals alterations in DNA methylation in the regulatory regions of left ventricle development genes in human dilated cardiomyopathy” (Bong-Seok Jo, In-Uk Koh, Jae-Bum Bae, Ho-Yeong Yu, Eun-Seok Jeon, Hae-Young Lee, Jae-Joong Kim, Murim Choi, Sun Shim Choi, 2016) [1]

Improvement of Mechanical Properties of UV-curable Resin for High-aspect Ratio Microstructures Fabricated in Microstereolithography

Recently, microstructures fabricated using microstereolithography technology have been used in the biological, medical and mechanical fields. Microstereolithography can fabricate real 3D microstructures with fine features, although there is presently a limited number of materials available for use in the process. Deformation of the fine features on a fabricated microstructure remains a critical issue for successful part fabrication, and part deformation can occur during rinsing or during fabrication as a result of fluid flow forces that occur during movement of mechanical parts of the system. Deformation can result in failure to fabricate a particular feature by breaking the feature completely, spatial deflection of the feature, or attaching the feature to neighboring microstructures. To improve mechanical strength of fabricated microstructures, a clay nanocomposite can be used. In particular, a high-aspect ratio microstructure can be fabricated without distortion using photocurable liquid resin containing a clay nanocomposite. In this paper, a clay nanocomposite was blended with a photocurable liquid resin to solve the deformation problem that occurs during fabrication and rinsing. An optimal mixture ratio of a clay nanocomposite was found through tensile testing and the minimal allowable distance between microstructures was found through fabrication experimentation. Finally, using these results, high-aspect ratio microstructures were fabricated using a clay nanocomposite resin without distortion

Electrogenic transport and K(+) ion channel expression by the human endolymphatic sac epithelium.

The endolymphatic sac (ES) is a cystic organ that is a part of the inner ear and is connected to the cochlea and vestibule. The ES is thought to be involved in inner ear ion homeostasis and fluid volume regulation for the maintenance of hearing and balance function. Many ion channels, transporters, and exchangers have been identified in the ES luminal epithelium, mainly in animal studies, but there has been no functional study investigating ion transport using human ES tissue. We designed the first functional experiments on electrogenic transport in human ES and investigated the contribution of K(+) channels in the electrogenic transport, which has been rarely identified, even in animal studies, using electrophysiological/pharmacological and molecular biological methods. As a result, we identified functional and molecular evidence for the essential participation of K(+) channels in the electrogenic transport of human ES epithelium. The identified K(+) channels involved in the electrogenic transport were KCNN2, KCNJ14, KCNK2, and KCNK6, and the K(+) transports via those channels are thought to play an important role in the maintenance of the unique ionic milieu of the inner ear fluid

One-directional flow of ionic solutions along fine electrodes under an alternating current electric field

Electric fields are widely used for controlling liquids in various research fields. To control a liquid, an alternating current (AC) electric field can offer unique advantages over a direct current (DC) electric field, such as fast and programmable flows and reduced side effects, namely the generation of gas bubbles. Here, we demonstrate one-directional flow along carbon nanotube nanowires under an AC electric field, with no additional equipment or frequency matching. This phenomenon has the following characteristics: First, the flow rates of the transported liquid were changed by altering the frequency showing Gaussian behaviour. Second, a particular frequency generated maximum liquid flow. Third, flow rates with an AC electric field (approximately nanolitre per minute) were much faster than those of a DC electric field (approximately picolitre per minute). Fourth, the flow rates could be controlled by changing the applied voltage, frequency, ion concentration of the solution and offset voltage. Our finding of microfluidic control using an AC electric field could provide a new method for controlling liquids in various research fields