High temperature fatigue behaviour in an advanced nickel based superalloy: The effects of oxidation and stress relaxation at notches

The low cycle fatigue performance of the nickel based superalloy RR1000 was investigated under a variety of load waveforms at high temperature, employing a double edge notch geometry under load control. Experiments on a plain cylindrical specimen design under strain control were later performed to simulate the constrained conditions at the root of the notch in order to characterise the interaction between surface constituents and the environment. A significant fatigue debit was demonstrated under both load/strain scenarios when superimposing a dwell period at the minimum point of the cycle. This debit was attributed to a reduction in fatigue crack initiation life resulting from oxidation damage which subsequently cracks under cyclic tension together with a modification to the mean stress through cyclic stabilisation. The same dwell period superimposed at the peak of the cycle was essentially benign for excursions under strain control loading

Pre-notched and corroded low cycle fatigue behaviour of a nickel based alloy for disc rotor applications

Currently there is doubt surrounding the suitability of chemically-induced stress independent pre-conditioning of specimens to simulate turbine corrosion prior to fatigue testing. the thick oxide scales developed using such techniques can lead to net section loss and typically a lack of grain boundary sulphide attack seen in components that experience stress. An alternative approach to a corrosion-fatigue test scenario is suggested by micro-notching fatigue specimens prior to low salt flux corrosion to form grain boundary sulphide particles within channel-like features akin to stress assisted morphologies. On fatigue testing, a trend was identified where a change of mechanism was observed. The grain boundary oxide likely formed in the wake of freshly precipitated sulphide particles fractures around segments of grains leading to a metal loss that contributes to a significant reduction in fatigue properties

Mode structure and ray dynamics of a parabolic dome microcavity

We consider the wave and ray dynamics of the electromagnetic field in a parabolic dome microcavity. The structure of the fundamental s-wave involves a main lobe in which the electromagnetic field is confined around the focal point in an effective volume of the order of a cubic wavelength, while the modes with finite angular momentum have a structure that avoids the focal area and have correspondingly larger effective volume. The ray dynamics indicates that the fundamental s-wave is robust with respect to small geometrical deformations of the cavity, while the higher order modes are associated with ray chaos and short-lived. We discuss the incidence of these results on the modification of the spontaneous emission dynamics of an emitter placed in such a parabolic dome microcavity.Comment: 50 pages, 17 figure

Workplace productivity and office type: an evaluation of office occupier differences based on age and gender

Purpose Open plan office environments are considered to offer workplace productivity benefits because of the opportunities that they create for interaction and knowledge exchange, but more recent research has highlighted noise, distraction and loss of privacy as significant productivity penalties with this office layout. This study aims to investigate if the purported productivity benefits of open plan outweigh the potential productivity penalties. Design/methodology/approach Previous research suggests that office environments are experienced differently according to the gender and age of the occupier across both open-plan and enclosed configurations. Empirical research undertaken with office occupiers in the Middle East (N=220) led to evaluations to establish the impact different offices had on perceived productivity. Factor analysis was used to establish five underlying components of office productivity. The five factors are subsequently used as the basis for comparison between office occupiers based on age, gender and office type. Findings This research shows that benefits and penalties to workplace productivity are experienced equally across open-plan and enclosed office environments. The greatest impact on perceived workplace productivity however was availability of a variety of physical layouts, control over interaction and the 'downtime' offered by social interaction points. Male occupiers and those from younger generations were also found to consider the office environment to have more of a negative impact on their perceived workplace productivity compared to female and older occupiers. Originality/value The originality of this paper is that it develops the concept of profiling office occupiers with the aim of better matching office provision. This paper aims to establish different occupier profiles based on age, gender and office type. Data analysis techniques such as factor analysis and t-test analysis identify the need for different spaces so that occupiers can choose the most appropriate space to best undertake a particular work task. In addition, it emphasises the value that occupiers place on ‘downtime’ leading to the need for appropriate social space

An EBSD study of the deformation of service-aged 316 austenitic steel

Electron backscatter diffraction (EBSD) has been used to examine the plastic deformation of an ex-service 316 austenitic stainless steel at 297K and 823K (24 °C and 550 °C)at strain rates 3.5x10-3 to 4 x 10-7 s-1. The distribution of local misorientations was found to depend on the imposed plastic strain following a lognormal distribution at true strains 0.1. At 823 K (550 °C), the distribution of misorientations depended on the applied strain rate. The evolution of lattice misorientations with increasing plastic strain up to 0.23 was quantified using the metrics kernel average misorientation, average intragrain misorientation, and low angle misorientation fraction. For strain rate down to 10-5 s-1 all metrics were insensitive to deformation temperature, mode (tension vs. compression) and orientation of the measurement plane. The strain sensitivity of the different metrics was found to depend on the misorientation ranges considered in their calculation. A simple new metric, proportion of undeformed grains, is proposed for assessing strain in both aged and unaged material. Lattice misorientations build up with strain faster in aged steel than in un-aged material and most of the metrics were sensitive to the effects of thermal aging. Ignoring aging effects leads to significant overestimation of the strains around welds. The EBSD results were compared with nanohardness measurements and good agreement established between the two techniques of assessing plastic strain in aged 316 steel

On the Effect of Nb on the Microstructure and Properties of Next Generation Polycrystalline Powder Metallurgy Ni-Based Superalloys

Abstract The effect of Nb on the properties and microstructure of two novel powder metallurgy (P/M) Ni-based superalloys was evaluated, and the results critically compared with the Rolls-Royce alloy RR1000. The Nb-containing alloy was found to exhibit improved tensile and creep properties as well as superior oxidation resistance compared with both RR1000 and the Nb-free variant tested. The beneficial effect of Nb on the tensile and creep properties was due to the microstructures obtained following the post-solution heat treatments, which led to a higher γ′ volume fraction and a finer tertiary γ′ distribution. In addition, an increase in the anti-phase-boundary energy of the γ′ phase is also expected with the addition of Nb, further contributing to the strength of the material. However, these modifications in the γ′ distribution detrimentally affect the dwell fatigue crack-growth behavior of the material, although this behavior can be improved through modified heat treatments. The oxidation resistance of the Nb-containing alloy was also enhanced as Nb is believed to accelerate the formation of a defect-free Cr2O3 scale. Overall, both developmental alloys, with and without the addition of Nb, were found to exhibit superior properties than RR1000.This work was supported by the Rolls-Royce/EPSRC Strategic Partnership under EP/H022309/1, EP/H500375/1 and EP/ M005607/1

The challenge to professionals of using social media: teachers in England negotiating personal-professional identities

Social media are a group of technologies such as Twitter, Facebook and LinkedIn which offer people chances to interact with one another in new ways. Teachers, like other members of society, do not all use social media. Some avoid, some experiment with and others embrace social media enthusiastically. As a means of communication available to everyone in modern society, social media is challenging teachers, as other professionals in society, to decide whether to engage with these tools and, if so, on what basis – as an individual (personally), or as a teacher (professionally). Although teachers are guided by schools and codes of practice, teachers as individuals are left to decide whether and how to explore social media for either their own or their students' learning. This paper analyses evidence from interviews with 12 teachers from England about their use of social media as to the challenges they experience in relation to using the media as professional teachers.. Teachers are in society’s spotlight in terms of examples of inappropriate use of social media but also under peer pressure to connect. This paper explores their agency in responding. The paper focuses on how teachers deal with tensions between their personal and professional use of social media. These tensions are not always perceived as negative and some teachers' accounts revealed a unity in their identities when using social media. The paper reflects on the implications of such teachers' identities in relation to the future of social media use in education