180 research outputs found

    Radiative Leptonic BcB_c Decays

    Full text link
    We analyze the radiative leptonic BcB_c decay mode: BcνγB_c \to \ell \nu \gamma (=e,μ\ell=e, \mu) using a QCD-inspired constituent quark model. The prediction: B(Bcνγ)3×105{\cal B}(B_c \to \ell \nu \gamma)\simeq 3 \times 10^{-5} makes this channel experimentally promising in view of the large number of BcB_c mesons which are expected to be produced at the future hadron facilities.Comment: LaTex, 12 pages, 2 figures. A discussion on gauge invariance added. Numerical results update

    New determination of the mass of the eta meson at COSY-ANKE

    Get PDF
    A value for the mass of the eta meson has been determined at the COSY-ANKE facility through the measurement of a set of deuteron laboratory beam momenta and associated 3He center-of-mass momenta in the d+p -> 3He+X reaction. The eta was then identified by the missing-mass peak and the production threshold determined. The individual beam momenta were fixed with a relative precision of 3 x 10^-5 for values around 3 GeV/c by using a polarized deuteron beam and inducing an artificial depolarizing spin resonance, which occurs at a well-defined frequency. The final-state momenta in the two-body d+p -> 3He+eta reaction were investigated in detail by studying the size of the 3He momentum ellipse with the forward detection system of the ANKE spectrometer. Final alignment of the spectrometer for this high precision experiment was achieved through a comprehensive study of the 3He final-state momenta as a function of the center-of-mass angles, taking advantage of the full geometrical acceptance. The value obtained for the mass, m(eta)=(547.873 +- 0.005(stat) +- 0.027(syst)) MeV/c^2, is consistent and competitive with other recent measurements, in which the meson was detected through its decay products.Comment: 11 pages, 11 figures, 3 tables, published versio

    Determination of Deuteron Beam Polarizations at COSY

    Get PDF
    The vector and tensor polarizations of a deuteron beam have been measured using elastic deuteron-carbon scattering at 75.6 MeV and deuteron-proton scattering at 270 MeV. After acceleration to 1170 MeV inside the COSY ring, the polarizations of the deuterons were checked by studying a variety of nuclear reactions using a cluster target at the ANKE magnet spectrometer placed at an internal target position of the storage ring. All these measurements were consistent with the absence of depolarization during acceleration and provide a number of secondary standards that can be used in subsequent experiments at the facility.Comment: 12 pages, 13 figure

    Measurement of the isospin-filtering dd -> 4He K+ K- reaction at Q=39 MeV

    Get PDF
    The total cross section for the dd -> 4He K+ K- reaction has been measured at a beam momentum of 3.7 GeV/c, corresponding to an excess energy of 39 MeV, which is the maximum possible at the Cooler Synchrotron COSY-J\"{u}lich. A deuterium cluster-jet target and the ANKE forward magnetic spectrometer, placed inside the storage ring, have been employed in this investigation. We find a total cross section of sigma(tot) < 14 pb, which brings into question the viability of investigating the dd -> 4He a0(980) reaction as a means of studying isospin violation.Comment: Five pages with three eps figure

    Measuring the Polarization of a Rapidly Precessing Deuteron Beam

    Get PDF
    This paper describes a time-marking system that enables a measurement of the in-plane (horizontal) polarization of a 0.97-GeV/c deuteron beam circulating in the Cooler Synchrotron (COSY) at the Forschungszentrum J\"ulich. The clock time of each polarimeter event is used to unfold the 120-kHz spin precession and assign events to bins according to the direction of the horizontal polarization. After accumulation for one or more seconds, the down-up scattering asymmetry can be calculated for each direction and matched to a sinusoidal function whose magnitude is proportional to the horizontal polarization. This requires prior knowledge of the spin tune or polarization precession rate. An initial estimate is refined by re-sorting the events as the spin tune is adjusted across a narrow range and searching for the maximum polarization magnitude. The result is biased toward polarization values that are too large, in part because of statistical fluctuations but also because sinusoidal fits to even random data will produce sizeable magnitudes when the phase is left free to vary. An analysis procedure is described that matches the time dependence of the horizontal polarization to templates based on emittance-driven polarization loss while correcting for the positive bias. This information will be used to study ways to extend the horizontal polarization lifetime by correcting spin tune spread using ring sextupole fields and thereby to support the feasibility of searching for an intrinsic electric dipole moment using polarized beams in a storage ring. This paper is a combined effort of the Storage Ring EDM Collaboration and the JEDI Collaboration.Comment: 28 pages, 15 figures, prepared for Physical Review ST - Accelerators and Beam

    The energy dependence of the pp->K+ n Sigma+ reaction close to threshold

    Full text link
    The production of the Sigma+ hyperon through the pp->K+nSigma+ reaction has been investigated at four energies close to threshold, 1.826, 1.920, 1.958, and 2.020 GeV. At low energies, correlated K+pi+ pairs can only originate from Sigma+ production so that their measurement allows the total cross section for the reaction to be determined. The results obtained are completely consistent with the values extracted from the study of the K+-proton correlation spectra obtained in the same experiment. These spectra, as well as the inclusive K+ momentum distributions, also provide conservative upper limits on the Sigma+ production rates. The measurements show a Sigma+ production cross section that varies roughly like phase space and, in particular, none of the three experimental approaches used supports the anomalously high near-threshold pp->K+ nSigma+ total cross section previously reported [T. Rozek et al., Phys. Lett. B 643, 251 (2006)].Comment: Submitted to PR

    Observation of inverse diproton photodisintegration at intermediate energies

    Get PDF
    The reaction pp->{pp}_s\gamma, where {pp}_s is a proton pair with an excitation energy E_{pp}<3 MeV, has been observed with the ANKE spectrometer at COSY-Juelich for proton beam energies of T_p=0.353, 0.500, and 0.550 GeV. This is equivalent to photodisintegration of a free 1S_0 diproton for photon energies E\gamma ~ T_p/2. The differential cross sections measured for c.m. angles 0 deg.<\theta_{pp}<20 deg. exhibit a steep increase with angle that is compatible with E1 and E2 multipole contributions. The ratio of the measured cross sections to those of np->d\gamma is on the 10^{-3}-10^{-2} level. The increase of the pp->{pp}_s\gamma cross section with T_p might reflect the influence of the Delta(1232) excitation.Comment: 4 pages + 4 figure

    Flux Tube Zero-Point Motion, Hadronic Charge Radii, and Hybrid Meson Production Cross Sections

    Get PDF
    Flux tube zero-point motion produces quark displacements transverse to the flux tube which make significant contributions to hadronic charge radii. In heavy quark systems, these contributions can be related by Bjorken's sum rule to the rates for semileptonic decay to hybrid mesons. This connection can be generalized to other leptoproduction processes, where transverse contributions to elastic form factor slopes are related to the cross sections for the production of the associated hybrid states. I identify the flux tube overlap integral responsible for these effects as the strong QCD analogue of the Sudakov form factor of perturbative QCD.Comment: 16 pages, revised to clarify some points and to improve and correct the notation for the flux tube wave function

    One-pion transitions between heavy baryons in the constituent quark model

    Full text link
    Single pion transitions of S wave to S wave, P wave to S wave and P wave to P wave heavy baryons are analyzed in the framework of the Heavy Quark Symmetry limit (HQS). We use a constituent quark model picture for the light diquark system with an underlying SU(2N_{f}) X O(3) symmetry to reduce the number of the HQS coupling factors required to describe these transitions. We also use the quantum theory of angular momentum to rewrite the one-pion transitions constituent quark model results in a more general form using the 6j- and 9j-symbols. We finally estimate the decay rates of some single pion transitions between charm baryon states.Comment: Latex, 33 pages including 2 figures (Postscript). Some typos are corrected with minor changes. Two references were added to the final version which will appear in Phy. Rev.
    corecore