965 research outputs found
New method for characterizing electron mediators in microbial systems using a thin-layer twin-working electrode cell
Microbial biofilms are significant ecosystems where the existence of redox gradients drive electron transfer often via soluble electron mediators. This study describes the use of two interfacing working electrodes (WEs) to simulate redox gradients within close proximity (250 ”m) for the detection and quantification of electron mediators. By using a common counter and reference electrode, the potentials of the two WEs were independently controlled to maintain a suitable âvoltage windowâ, which enabled simultaneous oxidation and reduction of electron mediators as evidenced by the concurrent anodic and cathodic currents, respectively. To validate the method, the electrochemical properties of different mediators (hexacyanoferrate, HCF, riboflavin, RF) were characterized by stepwise shifting the âvoltage windowâ (ranging between 25 and 200 mV) within a range of potentials after steady equilibrium current of both WEs was established. The resulting differences in electrical currents between the two WEs were recorded across a defined potential spectrum (between â1 V and +0.5 V vs. Ag/AgCl). Results indicated that the technique enabled identification (by the distinct peak locations at the potential scale) and quantification (by the peak of current) of the mediators for individual species as well as in an aqueous mixture. It enabled a precise determination of mid-potentials of the externally added mediators (HCF, RF) and mediators produced by pyocyanin-producing Pseudomonas aeruginosa (WACC 91) culture. The twin working electrode described is particularly suitable for studying mediator-dependent microbial electron transfer processes or simulating redox gradients as they exist in microbial biofilms
Risks of Perfluoroalkyl and Polyfluoroalkyl substances (PFAS) for sustainable water recycling via aquifers
The prediction of the fate of perfluoroalkyl and polyfluoroalkyl substances (PFAS) in water recycling with urban stormwater and treated wastewater is important since PFAS are widely used, persistent, and have potential impacts on human health and the environment. These alternative water sources have been utilized for water recycling via aquifers or managed aquifer recharge (MAR). However, the fate of these chemicals in MAR schemes and the potential impact in terms of regulation have not been studied. PFAS can potentially be transported long distances in the subsurface during MAR. This article reviews the potential risks to MAR systems using recycled water and urban stormwater. To date, there are insufficient data to determine if PFAS can be degraded by natural processes or retained in the aquifer and become suitable pre-treatment or post-treatment technologies that will need to be employed depending upon the end use of the recovered water. The use of engineered pre-treatment or post-treatment methods needs to be based on a âfit for purposeâ principle and carefully integrated with the proposed water end use to ensure that human and environmental health risks are appropriately managed
Recovery of metals from waste lithium ion battery leachates using biogenic hydrogen sulfide
Lithium ion battery (LIB) waste is increasing globally and contains an abundance of valuable metals that can be recovered for re-use. This study aimed to evaluate the recovery of metals from LIB waste leachate using hydrogen sulfide generated by a consortium of sulfate-reducing bacteria (SRB) in a lactate-fed fluidised bed reactor (FBR). The microbial community analysis showed Desulfovibrio as the most abundant genus in a dynamic and diverse bioreactor consortium. During periods of biogenic hydrogen sulfide production, the average dissolved sulfide concentration was 507 mg Lâ1 and the average volumetric sulfate reduction rate was 278 mg Lâ1 dâ1. Over 99% precipitation efficiency was achieved for Al, Ni, Co, and Cu using biogenic sulfide and NaOH, accounting for 96% of the metal value contained in the LIB waste leachate. The purity indices of the precipitates were highest for Co, being above 0.7 for the precipitate at pH 10. However, the process was not selective for individual metals due to simultaneous precipitation and the complexity of the metal content of the LIB waste. Overall, the process facilitated the production of high value mixed metal precipitates, which could be purified further or used as feedstock for other processes, such as the production of steel
A new chiral ligand: 2,6-bis 4(S)-isopropyl-1-phenyl-4,5-dihydro-1H-imidazol-2-yl pyridine
The title compound, C29H33N5, is a new chiral bis(imidazolyl) pyridine derivative with a skeleton similar to the bis(oxazolyl) pyridine derivatives, which have been extensively used as ligands in various asymmetric catalytic reactions. The most prominent feature of the present compound is the considerable sp(2) character of N atoms of the imidazoline rings. The substituents at the Nsp(2) atoms can provide a means for tuning the electronic and conformational properties of the compound
High quality GaMnAs films grown with As dimers
We demonstrate that GaMnAs films grown with As2 have excellent structural,
electrical and magnetic properties, comparable or better than similar films
grown with As4. Using As2, a Curie temperature of 112K has been achieved, which
is slightly higher than the best reported to date. More significantly, films
showing metallic conduction have been obtained over a much wider range of Mn
concentrations (from 1.5% to 8%) than has been reported for films grown with
As4. The improved properties of the films grown with As2 are related to the
lower concentration of antisite defects at the low growth temperatures
employed.Comment: 8 pages, accepted for publication in J. Crystal Growt
PO-0970: Assessment of regional positional repeatability in head and neck using a dedicated MR simulator
Recent progress in biohydrometallurgy and microbial characterisation
Since the discovery of microbiological metal dissolution, numerous biohydrometallurgical approaches have been developed to use microbially assisted aqueous extractive metallurgy for the recovery of metals from ores, concentrates, and recycled or residual materials. Biohydrometallurgy has helped to alleviate the challenges related to continually declining ore grades by transforming uneconomic ore resources to reserves. Engineering techniques used for biohydrometallurgy span from above ground reactor, vat, pond, heap and dump leaching to underground in situ leaching. Traditionally biohydrometallurgy has been applied to the bioleaching of base metals and uranium from sulfides and biooxidation of sulfidic refractory gold ores and concentrates before cyanidation. More recently the interest in using bioleaching for oxide ore and waste processing, as well as extracting other commodities such as rare earth elements has been growing. Bioprospecting, adaptation, engineering and storing of microorganisms has increased the availability of suitable biocatalysts for biohydrometallurgical applications. Moreover, the advancement of microbial characterisation methods has increased the understanding of microbial communities and their capabilities in the processes. This paper reviews recent progress in biohydrometallurgy and microbial characterisatio
- âŠ