Numerical simulation of mono-disperse droplet spray dryer under the influence of nozzle motion

With the increasing demand of uniform particles in the fields of medicine etc., the research on monodisperse droplet spray dryer (MDSD) becomes important. The drying efficiency of the current MDSD facility has to be improved to realize industrial applications. In this work, the influence of several kinds of nozzle movement on the drying process has been thoroughly explored by silico experiments. It is found that the velocity of the nozzle movement plays a key role in drying efficiency improvement. The movement of the nozzle leads to a wider distribution of the final moisture content of particles, and this effect becomes less significant with the increase of the velocity of nozzle motion. For all motion types under investigation, the circular motion is superior to the other motion types. It is revealed that the change of droplet dispersion state due to nozzle motion is the main factor that improves drying performance

New flexible silicone-based EEG dry sensor material compositions exhibiting improvements in lifespan, conductivity, and reliability

© 2016 by the authors; licensee MDPI, Basel, Switzerland. This study investigates alternative material compositions for flexible silicone-based dry electroencephalography (EEG) electrodes to improve the performance lifespan while maintaining high-fidelity transmission of EEG signals. Electrode materials were fabricated with varying concentrations of silver-coated silica and silver flakes to evaluate their electrical, mechanical, and EEG transmission performance. Scanning electron microscope (SEM) analysis of the initial electrode development identified some weak points in the sensors’ construction, including particle pull-out and ablation of the silver coating on the silica filler. The newly-developed sensor materials achieved significant improvement in EEG measurements while maintaining the advantages of previous silicone-based electrodes, including flexibility and non-toxicity. The experimental results indicated that the proposed electrodes maintained suitable performance even after exposure to temperature fluctuations, 85% relative humidity, and enhanced corrosion conditions demonstrating improvements in the environmental stability. Fabricated flat (forehead) and acicular (hairy sites) electrodes composed of the optimum identified formulation exhibited low impedance and reliable EEG measurement; some initial human experiments demonstrate the feasibility of using these silicone-based electrodes for typical lab data collection applications

Genetic enrichment of cardiomyocytes derived from mouse embryonic stem cells

Pluripotent embryonic stem cells (ESC) have the ability to differentiate into a variety of cell lineages in vitro, including cardiomyocytes. Successful applications of ESC-derived cardiomyocytes in cell therapy and tissue engineering were limited by difficulties in selecting the desired cells from the heterogeneous cell population. We describe a simple method to generate relatively pure cardiomyocytes from mouse ESCs. A construct comprising mouse cardiac α-myosin heavy chain (MHC) promoter driving the neomycin resistance gene and SV40 promoter driving the hygromycin resistant gene designated pMHCneo/ SV40-hygro, was stably transfected into mouse ESCs. The transgenic ESC line, designated MN6 retained the undifferentiated state and the potential of cardiogenic differentiation. After G418 selection, more than 99% of cells expressed α-sarcomeric actin. Immunocytological and ultrastructural analysis demonstrated that, the selected cardiomyocytes were highly differentiated. Our results represent a simple genetic manipulation used to product essentially pure cardiomyocytes from differentiating ESCs. It may facilitate the development of cell therapy in heart diseases.Key words: Embryonic stem cells, α-myosin heavy chain promoter, cardiomyocytes, differentiation, genetic enrichment

Resonances in J/ψ→ϕπ+π−J/\psi \to \phi \pi ^+\pi ^- and ϕK+K−\phi K^+K^-

A partial wave analysis is presented of $J/\psi \to \phi \pi ^+\pi ^-$ and $\phi K^+K^-$ from a sample of 58M $J/\psi$ events in the BES II detector. The $f_0(980)$ is observed clearly in both sets of data, and parameters of the Flatt\' e formula are determined accurately: $M = 965 \pm 8$ (stat) $\pm 6$ (syst) MeV/c$^2$, $g_1 = 165 \pm 10 \pm 15$ MeV/c$^2$, $g_2/g_1 = 4.21 \pm 0.25 \pm 0.21$. The $\phi \pi \pi$ data also exhibit a strong $\pi \pi$ peak centred at $M = 1335$ MeV/c$^2$. It may be fitted with $f_2(1270)$ and a dominant $0^+$ signal made from $f_0(1370)$ interfering with a smaller $f_0(1500)$ component. There is evidence that the $f_0(1370)$ signal is resonant, from interference with $f_2(1270)$. There is also a state in $\pi \pi$ with $M = 1790 ^{+40}_{-30}$ MeV/c$^2$ and $\Gamma = 270 ^{+60}_{-30}$ MeV/c$^2$; spin 0 is preferred over spin 2. This state, $f_0(1790)$, is distinct from $f_0(1710)$. The $\phi K\bar K$ data contain a strong peak due to $f_2'(1525)$. A shoulder on its upper side may be fitted by interference between $f_0(1500)$ and $f_0(1710)$.Comment: 17 pages, 6 figures, 1 table. Submitted to Phys. Lett.

First Measurements of eta_c Decaying into K^+K^-2(pi^+pi^-) and 3(pi^+pi^-)

The decays of eta_c to K^+K^-2(pi^+pi^-) and 3(pi^+pi^-) are observed for the first time using a sample of 5.8X10^7 J/\psi events collected by the BESII detector. The product branching fractions are determined to be B(J/\psi-->gamma eta_c)*B(eta_c-->K^+K^-pi^+pi^-pi^+pi^-)=(1.21+-0.32+- 0.23)X10^{-4}$,B(J/\psi-->gamma eta_c)*B(eta_c-->K^{*0}\bar{K}^{*0}pi^+pi^-)= (1.29+-0.43+-0.32)X10^{-4}$, and (J/\psi-->gamma eta_c)* B(eta_c-->pi^+pi^-pi^+pi^-pi^+pi^-)= (2.59+-0.32+-0.48)X10^{-4}. The upper limit for eta_c-->phi pi^+pi^-pi^+pi^- is also obtained as B(J/\psi-->gamma eta_c)*B(eta_c--> phi pi^+pi^-pi^+pi^-)< 6.03 X10^{-5} at the 90% confidence level.Comment: 11 pages, 4 figure

Identification of novel subgroup a variants with enhanced receptor binding and replicative capacity in primary isolates of anaemogenic strains of feline leukaemia virus

&lt;b&gt;BACKGROUND:&lt;/b&gt; The development of anaemia in feline leukaemia virus (FeLV)-infected cats is associated with the emergence of a novel viral subgroup, FeLV-C. FeLV-C arises from the subgroup that is transmitted, FeLV-A, through alterations in the amino acid sequence of the receptor binding domain (RBD) of the envelope glycoprotein that result in a shift in the receptor usage and the cell tropism of the virus. The factors that influence the transition from subgroup A to subgroup C remain unclear, one possibility is that a selective pressure in the host drives the acquisition of mutations in the RBD, creating A/C intermediates with enhanced abilities to interact with the FeLV-C receptor, FLVCR. In order to understand further the emergence of FeLV-C in the infected cat, we examined primary isolates of FeLV-C for evidence of FeLV-A variants that bore mutations consistent with a gradual evolution from FeLV-A to FeLV-C.&lt;p&gt;&lt;/p&gt; &lt;b&gt;RESULTS:&lt;/b&gt; Within each isolate of FeLV-C, we identified variants that were ostensibly subgroup A by nucleic acid sequence comparisons, but which bore mutations in the RBD. One such mutation, N91D, was present in multiple isolates and when engineered into a molecular clone of the prototypic FeLV-A (Glasgow-1), enhanced replication was noted in feline cells. Expression of the N91D Env on murine leukaemia virus (MLV) pseudotypes enhanced viral entry mediated by the FeLV-A receptor THTR1 while soluble FeLV-A Env bearing the N91D mutation bound more efficiently to mouse or guinea pig cells bearing the FeLV-A and -C receptors. Long-term in vitro culture of variants bearing the N91D substitution in the presence of anti-FeLV gp70 antibodies did not result in the emergence of FeLV-C variants, suggesting that additional selective pressures in the infected cat may drive the subsequent evolution from subgroup A to subgroup C.&lt;p&gt;&lt;/p&gt; &lt;b&gt;CONCLUSIONS:&lt;/b&gt; Our data support a model in which variants of FeLV-A, bearing subtle differences in the RBD of Env, may be predisposed towards enhanced replication in vivo and subsequent conversion to FeLV-C. The selection pressures in vivo that drive the emergence of FeLV-C in a proportion of infected cats remain to be established

Scalable Synthesis of Uniform Mesoporous Aluminosilicate Microspheres with Controllable Size and Morphology and High Hydrothermal Stability for Efficient Acid Catalysis

Mesoporous aluminosilicates are promising solid acid catalysts. They are also excellent supports for transition metal catalysts for various catalytic applications. Synthesis of mesoporous aluminosilicates with controllable particle size, morphology, and structure, as well as adjustable acidity and high hydrothermal stability, is very desirable. In this work, we demonstrate the scalable synthesis of Al-SBA-15 microspheres with controllable physicochemical properties by using the microfluidic jet-spray-drying technology. The productivity is up to ∼30 g of dried particles per nozzle per hour. The Al-SBA-15 microspheres possess uniform controllable micron sizes (27.5-70.2 μm), variable surface morphologies, excellent hydrothermal stability (in pure steam at 800 °C), high surface areas (385-464 m2/g), ordered mesopore sizes (5.4-5.8 nm), and desirable acid properties. The dependence of various properties, including particle size, morphology, porosity, pore size, acidity, and hydrothermal stability, of the obtained Al-SBA-15 microspheres on experimental parameters including precursor composition (Si/Al ratio and solid content) and processing conditions (drying and calcination temperatures) is established. A unique morphology transition from smooth to wrinkled microsphere triggered by control of the Si/Al ratio and solid content is observed. The particle formation and morphology-evolution mechanism are discussed. The Al-SBA-15 microspheres exhibit high acid catalytic performance for aldol-condensation reaction between benzaldehyde and ethyl alcohol with a high benzaldehyde conversion (∼56.3%), a fast pseudo-first-order reaction rate (∼0.1344 h-1), and a high cyclic stability, superior to the commercial zeolite acid (H-ZSM-5). Several influencing factors on the catalytic performance of the obtained Al-SBA-15 microspheres are also studied

(pi,pi)-electronic order in iron arsenide superconductors

The distribution of valence electrons in metals usually follows the symmetry of an ionic lattice. Modulations of this distribution often occur when those electrons are not stable with respect to a new electronic order, such as spin or charge density waves. Electron density waves have been observed in many families of superconductors[1-3], and are often considered to be essential for superconductivity to exist[4]. Recent measurements[5-9] seem to show that the properties of the iron pnictides[10, 11] are in good agreement with band structure calculations that do not include additional ordering, implying no relation between density waves and superconductivity in those materials[12-15]. Here we report that the electronic structure of Ba1-xKxFe2As2 is in sharp disagreement with those band structure calculations[12-15], instead revealing a reconstruction characterized by a (pi,pi) wave vector. This electronic order coexists with superconductivity and persists up to room temperature

A low-power and high-speed True Random Number Generator using generated RTN

A novel True Random Number Generator (TRNG), using random telegraph noise (RTN) as the entropy source, is proposed to address speed, design area, power and cost simultaneously. For the first time, the proposed design breaks the inherent speed limitation and generates true random numbers up to 3Mbps with ultra-low power. This is over 10 times faster than the state-of-the-art RTN-TRNG. Moreover, the new design does not require selection of devices and thus avoids the use of large transistor array and laborious post-selection process. This reduces the circuit area and the cost. The proposed TRNG has been successfully validated on three different processes and they all passed the National Institute of Standards and Technology (NIST) tests, making it a suitable candidate for future cryptographically secured applications in the internet of things (IoT)