1,005 research outputs found
Recommended from our members
An Adaptive Load Balance and Handoff Management Strategy for Hierarchical Infrastructure Networks
Hierarchical cellular networks that employ microcells with overlaying macrocells have been proposed to increase the traffic-carrying capacity and circuit quality. Variations in the traffic loads among cells will lessen the traffic-carrying capacity. Moreover, the handoff procedure usually takes place when the call crosses the cell boundary. An ineffective management will increase the system overheads, such as channel switch, data switch, and even network switch. The invetigation proposes an effective load balance and handoff management strategy. This strategy are implemented to solve traffic-adaption problem that can enhance the traffic-carrying capacity for variations in traffic. For the management of handoff procedure, our strategy considers the mobility of mobile hosts and the bandwidth utilization in macrocells. It can descrease the number of handoffs and, accordingly, lessen the system overhead. Furthermore, the simulation results are presented to confirm the efficiency of the proposed strategy
Pengaruh Penerapan Strategi Concept Mapping terhadap Hasil Belajar Siswa di Sekolah Dasar
This study aimed to analyze the influence of concept mapping strategy towards the learning result students in social science study on the V B grade of SD Negeri 17 Pontianak Kota. This study used an experimental method with Pre-Experimental design form using One-Group Pretest-Posttest Design. The population in this research were 68 students. The samples in this research was V B as a research class. Based on the t-test, the calculation result obtained t test (7,29) > t table (1,699) with significance level α = 5% means a significant influence using concept mapping strategy. The value of effect size (ES) is 0.39 with moderate category. It means that concept mapping strategy give a moderate effect to the learning result students in social science study on the V B grade of SD Negeri 17 Pontianak Kota
Decreased risk of acute myocardial infarction in stroke patients receiving acupuncture treatment: a nationwide matched retrospective cohort study
The mPEG-PCL Copolymer for Selective Fermentation of Staphylococcus lugdunensis Against Candida parapsilosis in the Human Microbiome.
Many human skin diseases, such as seborrheic dermatitis, potentially occur due to the over-growth of fungi. It remains a challenge to develop fungicides with a lower risk of generating resistant fungi and non-specifically killing commensal microbes. Our probiotic approaches using a selective fermentation initiator of skin commensal bacteria, fermentation metabolites or their derivatives provide novel therapeutics to rein in the over-growth of fungi. Staphylococcus lugdunensis (S. lugdunensis) bacteria and Candida parapsilosis (C. parapsilosis) fungi coexist in the scalp microbiome. S. lugdunensis interfered with the growth of C. parapsilosis via fermentation. A methoxy poly(ethylene glycol)-b-poly(ε-caprolactone) (mPEG-PCL) copolymer functioned as a selective fermentation initiator of S. lugdunensis, selectively triggering the S. lugdunensis fermentation to produce acetic and isovaleric acids. The acetic acid and its pro-drug diethyleneglycol diacetate (Ac-DEG-Ac) effectively suppressed the growth of C. parapsilosis in vitro and impeded the fungal expansion in the human dandruff. We demonstrate for the first time that S. lugdunensis is a skin probiotic bacterium that can exploit mPEG-PCL to yield fungicidal short-chain fatty acids (SCFAs). The concept of bacterial fermentation as a part of skin immunity to re-balance the dysbiotic microbiome warrants a novel avenue for studying the probiotic function of the skin microbiome in promoting health
Prognostic values of distinct CBX family members in breast cancer
Chromobox (CBX) family proteins are canonical components in polycomb repressive complexes 1 (PRC1), with epigenetic regulatory function and transcriptionally repressing target genes via chromatin modification. A plethora of studies have highlighted the function specifications among CBX family members in various cancer, including lung cancer, colon cancer and breast cancer. Nevertheless, the functions and prognostic roles of distinct CBX family members in breast cancer (BC) remain elusive. In this study, we reported the prognostic values of CBX family members in patients with BC through analysis of a series of databases, including CCLE, ONCOMINE, Xena Public Data Hubs, and Kaplan-Meier plotter. It was found that the mRNA expression of CBX family members were noticeably higher in BC than normal counterparts. CBX2 was highly expressed in Basal-like and HER-2 subtypes, while CBX4 and CBX7 expressions were enriched in Luminal A and Luminal B subtypes of BC. Survival analysis revealed that CBX1, CBX2 and CBX3 mRNA high expression was correlated to worsen relapse-free survival (RFS) for all BC patients, while CBX4, CBX5, CBX6 and CBX7 high expression was correlated to better RFS in this setting. Noteworthily, CBX1 and CBX2 were associated with chemoresistance whereas CBX7 was associated with tamoxifen sensitivity, as well as chemosensitivity in breast tumors. Therefore, we propose that CBX1, CBX2 and CBX7 are potential targets for BC treatment. The results might be beneficial for better understanding the complexity and heterogeneity in the molecular underpinning of BC, and to develop tools to more accurately predict the prognosis of patients with BC
Three-dimensional printing of patient-specific surgical plates in head and neck reconstruction: A prospective pilot study
Background Surgical plates have been extensively used in head and neck reconstruction and conventional plates are mass-produced with universal configurations. To overcome disadvantages of conventional surgical plates, we have been exploring patient-specific surgical plates using the three-dimensional (3D) printing technology. We hypothesized that the application of 3D-printed patient-specific surgical plates in head and neck reconstruction is feasible, safe and precise.
Methods We are conducting a prospective clinical trial to assess the feasibility, safety and accuracy of applying 3D-printed patient-specific surgical plates in head and neck reconstruction. The primary endpoint was the intraoperative success rate. Secondary endpoints included the incidence and severity of postoperative adverse events within six months postoperatively. The accuracy of surgical outcomes was also explored by comparing the planned and final positions of the maxilla, mandible and grafted bone segments.
Results From December 2016 to October 2017, ten patients were enrolled and underwent head and neck reconstruction using 3D-printed patient-specific surgical plates. The patient-specific surgical plates adapted to bone surface precisely and no plate-bending was performed. The intraoperative success rate was 100%. The average follow-up period was 6.5 months. No major adverse events were observed. The mean absolute distance deviation of integral mandible or maxilla was 1.40 ± 0.63 mm, which showed a high accuracy of reconstruction.
Conclusions The 3D printing of patient-specific surgical plates could be effective in head and neck reconstruction. Surgical procedures were simplified. The precise jaw reconstruction was achieved with high accuracy. Long-term results with a larger sample size are warranted to support a final conclusion. The study protocol has been registered in ClinicalTrials.gov with a No. of NCT03057223
Fabricating core-shell WC@C/Pt structures and its enhanced performance for methanol electrooxidation
© 2017 Chinese Physical Society. The spray-dried spheres within a W/Pt multi-separation can be used to prepare discrete core-shell WC@C/Pt catalysts through a typical carburization production mechanism at 800 °C. In contrast with previous studies of the WC/Pt synthesis, the reaction observed here proceeds through an indirect annealing mechanism at 600 °C wherein species diffuse, thereby resulting in core-shell structure, and Pt nanoparticles were successfully dispersed in size/shape and randomly scattered across the in situ produced C spheres. Through direct carburization or at higher initial hydrochloroplatinic acid concentrations, however, complete reaction with core-shell spheres was not observed. Indirect carburization reduces the strain felt by the bonds featuring the larger WC particles and allows the motion of carbon around WC and Pt nanoparticles to be reserved, influencing the electrocatalytic performance and stability toward methanol oxidation
- …