228 research outputs found

    Natural control of the mosquito population via Odonata and Toxorhynchites

    Get PDF
    The main impact of mosquito pests is the transmission of many dangerous diseases and death. Hence, the reduction of their population by the use of a natural control method is a primary objective of this research. This mosquito reduction method utilises different species of predators (Odonata) and (Toxorhynchites) to substantially improve the environment. The frequency of capturing the pest mosquitoes by the predators is determined using a Pascal distribution, whilst insect mortality is modelled using a Weibull distribution. The results from the model show that by using insect predators, a significant reduction of the mosquito population is possible in less than eighty days

    Tagging and recovery of tropical tunas 1955-1959

    Get PDF
    ENGLISH: Yellowfin and skipjack tuna occur in commercial quantities in the Eastern Pacific Ocean from California to Chile. They are captured in the high seas at distances from the mainland up to several hundred miles (see Alverson, 1960). The Inter-American Tropical Tuna Commission has been engaged for several years in research on the biology, ecology, and population dynamics of the stocks of these species supporting the commercial fishery, in order to elucidate the effects of the fishery and of fishery independent factors on their abundance and behavior, to provide the scientific basis for rational management of the fishery. An important aspect of this research is the investigation of the migrations of these species in the Eastern Pacific, and the determination of whether each consists of but a single population or is composed of various sub-populations. One direct means of approaching these problems is the tagging, and subsequent recovery, of specimens in the region of the commercial fishery. This also provides direct information on growth rates, by comparison of sizes of specimens at tagging and upon later recovery, and can furnish the basis of estimating rates of mortality. These are two of the important elements of the vital statistics of the tuna populations. SPANISH: El atún aleta amarilla y el barrilete se encuentran en cantidades comerciales en el Océano Pacífico Oriental, desde California hasta Chile. Estos peces son capturados en alta mar a varios cientos de millas de distancia de tierra firme (ver Alverson, 1960). La Comisión Interamericana del Atún Tropical ha estado dedicada durante varios años a la investigación de la biología, ecología y dinámica de las poblaciones de los stocks de las indicadas especies que mantienen la pesquería comercial, a fin de elucidar los efectos de ésta y de los factores independientes de la explotación sobre la abundancia y hábitos de estos peces, para obtener una base científica que permita una administración racional de la pesquería. Un aspecto importante de esta investigación es el estudio de los movimientos migratorios de estas especies en el Pacífico Oriental, y la determinación de que si cada una constituye una sola población o está compuesta de varias subpoblaciones. Un medio directo de abordar estos problemas es el de la marcación, y subsecuente recuperación, de especímenes en la región de la pesquería comercial. Esto también proporciona una información directa sobre la tasa de crecimiento, por la comparación de los tamaños de los especímenes al ser marcados y recuperados más tarde y puede proveer la base para estimar las tasas de mortalidad. Estos son dos de los elementos importantes de las estadísticas vitales de las poblaciones de atún

    Comparison of Howland and General Impedance Converter (GIC) circuit based current sources for bio-impedance measurements

    Get PDF
    The current source is a key component in bio-impedance measurement systems. The accuracy of the current source can be measured in terms of its output impedance together with other parameters, with certain applications demanding extremely high output impedance. This paper presents an investigation and comparison of different current source designs based on the Enhanced Howland circuit combined with a General Impedance Converter (GIC) circuit using both ideal and non-ideal operational amplifiers. Under differing load conditions two different settings of the GIC are evaluated and the results are compared to show its performance settings. Whilst the study has shown that over a wide bandwidth (i.e. 100Hz-100MHz) the output impedance is limited, operation over a more limited range offers output impedance in the Giga-ohm range, which can be considered as being infinite

    Avionics Architectures for Exploration: Wireless Technologies and Human Spaceflight

    Get PDF
    The authors describe ongoing efforts by the Avionics Architectures for Exploration (AAE) project chartered by NASA's Advanced Exploration Systems (AES) Program to evaluate new avionics architectures and technologies, provide objective comparisons of them, and mature selected technologies for flight and for use by other AES projects. The AAE project team includes members from most NASA centers and from industry. This paper provides an overview of recent AAE efforts, with particular emphasis on the wireless technologies being evaluated under AES to support human spaceflight

    A flexible low-cost, high-precision, single interface electrical impedance tomography system for breast cancer detection using FPGA

    Get PDF
    Typically, in multi-frequency Electrical Impedance Tomography (EIT) systems, a current is applied and the voltages developed across the subject are detected. However, due to the complexity of designing stable current sources, there has been mention in the literature of applying a voltage to the subject whilst measuring the consequent current flow. This paper presents a comparative study between the two techniques in a novel design suitable for the detection of breast cancers. The suggested instrument borrows the best features of both the injection of current and the application of voltage, circumventing their limitations. Furthermore, the system has a common patient-electrode interface for both methodologies, whilst the control of the system and the necessary signal processing is carried out in a field programmable gate array (FPGA). Through this novel system, wide-bandwidth, low-noise, as well as high-speed (frame rate) can be achieved

    A four-step ortho-rectification procedure for geo-referencing video streams from a low-cost UAV

    Get PDF
    In this paper, we present a four-step ortho-rectification procedure for real-time geo-referencing of video data from a low-cost UAV equipped with a multi-sensor system. The basic procedures for the real-time ortho-rectification are: (1) decompilation of the video stream into individual frames; (2) establishing the interior camera orientation parameters; (3) determining the relative orientation parameters for each video frame with respect to each other; (4) finding the absolute orientation parameters, using a self-calibration bundle and adjustment with the aid of a mathematical model. Each ortho-rectified video frame is then mosaicked together to produce a mosaic image of the test area, which is then merged with a well referenced existing digital map for the purpose of geo-referencing and aerial surveillance. A test field located in Abuja, Nigeria was used to evaluate our method. Video and telemetry data were collected for about fifteen minutes, and they were processed using the four-step ortho-rectification procedure. The results demonstrated that the geometric measurement of the control field from ortho-images is more accurate when compared with those from original perspective images when used to pin point the exact location of targets on the video imagery acquired by the UAV. The 2-D planimetric accuracy when compared with the 6 control points measured by a GPS receiver is between 3 to 5 metres

    Use of mechanical airway clearance devices in the home by people with neuromuscular disorders: effects on health service use and lifestyle benefits

    Get PDF
    Background; People with neuromuscular disorders (NMD) exhibit weak coughs and are susceptible to recurrent chest infections and acute respiratory complications, the most frequent reasons for their unplanned hospital admissions. Mechanical insufflation-exsufflation (MI-E) devices are a non-invasive method of increasing peak cough flow, improving cough efficacy, the clearance of secretion and overcoming atelectasis. There is limited published evidence on the impact of home use MI-E devices on health service utilisation. The aims of the study were: to assess the self-reported health and lifestyle benefits experienced as a result of home use of MI-E devices; and evaluate the effects of in-home use of MI-E devices on Emergency Department (ED) presentations, hospital admissions and inpatient length of stay (LOS). Methods: Individuals with NMD who were accessing a home MI-E device provided through Muscular Dystrophy Western Australia were invited to participate in a quantitative survey to obtain information on their experiences and self-assessed changes in respiratory health. An ad-hoc record linkage was performed to extract hospital, ED and mortality data from the Western Australian Department of Health (DOHWA). The main outcome measures were ED presentations, hospital separations and LOS, before and after commencement of home use of an MI-E device.Results: Thirty seven individuals with NMD using a MI-E device at home consented to participate in this study. The majority (73%) of participants reported using the MI-E device daily or weekly at home without medical assistance and 32% had used the machine to resolve a choking episode. The survey highlighted benefits to respiratory function maintenance and the ability to manage increased health care needs at home. Not using a home MI-E device was associated with an increased risk of ED presentations (RR = 1.76, 95% CI 1.1-2.84). The number of hospital separations and LOS reduced after the use of MI-E device, but not significantly. No deaths were observed in participants using the MI-E device at home. Conclusions: Home use of a MI-E device by people living with NMD may have a potential impact on reducing their health service utilisation and risk of death. Future research with greater subject numbers and longer follow-up periods is recommended to enhance this field of study

    Atomic detail visualization of photosynthetic membranes with GPU-accelerated ray tracing

    Get PDF
    The cellular process responsible for providing energy for most life on Earth, namely, photosynthetic light-harvesting, requires the cooperation of hundreds of proteins across an organelle, involving length and time scales spanning several orders of magnitude over quantum and classical regimes. Simulation and visualization of this fundamental energy conversion process pose many unique methodological and computational challenges. We present, in two accompanying movies, light-harvesting in the photosynthetic apparatus found in purple bacteria, the so-called chromatophore. The movies are the culmination of three decades of modeling efforts, featuring the collaboration of theoretical, experimental, and computational scientists. We describe the techniques that were used to build, simulate, analyze, and visualize the structures shown in the movies, and we highlight cases where scientific needs spurred the development of new parallel algorithms that efficiently harness GPU accelerators and petascale computers

    Joint PDF modelling of turbulent flow and dispersion in an urban street canyon

    Full text link
    The joint probability density function (PDF) of turbulent velocity and concentration of a passive scalar in an urban street canyon is computed using a newly developed particle-in-cell Monte Carlo method. Compared to moment closures, the PDF methodology provides the full one-point one-time PDF of the underlying fields containing all higher moments and correlations. The small-scale mixing of the scalar released from a concentrated source at the street level is modelled by the interaction by exchange with the conditional mean (IECM) model, with a micro-mixing time scale designed for geometrically complex settings. The boundary layer along no-slip walls (building sides and tops) is fully resolved using an elliptic relaxation technique, which captures the high anisotropy and inhomogeneity of the Reynolds stress tensor in these regions. A less computationally intensive technique based on wall functions to represent boundary layers and its effect on the solution are also explored. The calculated statistics are compared to experimental data and large-eddy simulation. The present work can be considered as the first example of computation of the full joint PDF of velocity and a transported passive scalar in an urban setting. The methodology proves successful in providing high level statistical information on the turbulence and pollutant concentration fields in complex urban scenarios.Comment: Accepted in Boundary-Layer Meteorology, Feb. 19, 200
    corecore