263 research outputs found
Mechanical Responses and Stress Fluctuations of a Supercooled Liquid in a Sheared Non-Equilibrium State
A steady shear flow can drive supercooled liquids into a non-equilibrium
state. Using molecular dynamics simulations under steady shear flow
superimposed with oscillatory shear strain for a probe, non-equilibrium
mechanical responses are studied for a model supercooled liquid composed of
binary soft spheres. We found that even in the strongly sheared situation, the
supercooled liquid exhibits surprisingly isotropic responses to oscillating
shear strains applied in three different components of the strain tensor. Based
on this isotropic feature, we successfully constructed a simple two-mode
Maxwell model that can capture the key features of the storage and loss moduli,
even for highly non-equilibrium state. Furthermore, we examined the correlation
functions of the shear stress fluctuations, which also exhibit isotropic
relaxation behaviors in the sheared non-equilibrium situation. In contrast to
the isotropic features, the supercooled liquid additionally demonstrates
anisotropies in both its responses and its correlations to the shear stress
fluctuations. Using the constitutive equation (a two-mode Maxwell model), we
demonstrated that the anisotropic responses are caused by the coupling between
the oscillating strain and the driving shear flow. We measured the magnitude of
this violation in terms of the effective temperature. It was demonstrated that
the effective temperature is notably different between different components,
which indicates that a simple scalar mapping, such as the concept of an
effective temperature, oversimplifies the true nature of supercooled liquids
under shear flow. An understanding of the mechanism of isotropies and
anisotropies in the responses and fluctuations will lead to a better
appreciation of these violations of the FDT, as well as certain consequent
modifications to the concept of an effective temperature.Comment: 15pages, 17figure
Wettability characteristics of an Al2O3/SiO2-based ceramic modified with CO2, Nd:YAG, excimer and high-power diode lasers
Interaction of CO2, Nd:YAG, excimer and high power diode laser (HPDL) radiation with the
surface of an Al2O3/SiO2 based ceramic was found to effect significant changes in the
wettability characteristics of the material. It was observed that interaction with CO2, Nd:YAG
and HPDL radiation reduced the enamel contact angle from 1180 to 310, 340 and 330
respectively. In contrast, interaction with excimer laser radiation resulted an increase in the
contact angle to 1210. Such changes were identified as being due to: (i) the melting and partial
vitrification of the Al2O3/SiO2 based ceramic surface as a result of interaction with CO2,
Nd:YAG HPDL radiation. (ii) the surface roughness of the Al2O3/SiO2 based ceramic
increasing after interaction with excimer laser radiation. (iii) the surface oxygen content of the
Al2O3/SiO2 based ceramic increasing after interaction with CO2, Nd:YAG and HPDL radiation.
The work has shown that the wettability characteristics of the Al2O3/SiO2 based ceramic could
be controlled and/or modified with laser surface treatment. In particular, whether the laser
radiation had the propensity to cause surface melting. However, a wavelength dependance of
the change of the wetting properties could not be deduced from the findings of this work
Sociobiological Control of Plasmid copy number
Background:
All known mechanisms and genes responsible for the regulation of plasmid replication lie with the plasmid rather than the chromosome. It is possible therefore that there can be copy-up mutants. Copy-up mutants will have within host selective advantage. This would eventually result into instability of bacteria-plasmid association. In spite of this possibility low copy number plasmids appear to exist stably in host populations. We examined this paradox using a computer simulation model.

Model:
Our multilevel selection model assumes a wild type with tightly regulated replication to ensure low copy number. A mutant with slightly relaxed replication regulation can act as a “cheater” or “selfish” plasmid and can enjoy a greater within-host-fitness. However the host of a cheater plasmid has to pay a greater cost. As a result, in host level competition, host cell with low copy number plasmid has a greater fitness. Furthermore, another mutant that has lost the genes required for conjugation was introduced in the model. The non-conjugal mutant was assumed to undergo conjugal transfer in the presence of another conjugal plasmid in the host cell.

Results:
The simulatons showed that if the cost of carrying a plasmid was low, the copy-up mutant could drive the wild type to extinction or very low frequencies. Consequently, another mutant with a higher copy number could invade the first invader. This process could result into an increasing copy number. However above a certain copy number within-host selection was overcompensated by host level selection leading to a rock-paper-scissor (RPS) like situation. The RPS situation allowed the coexistence of high and low copy number plasmids. The non-conjugal “hypercheaters” could further arrest the copy numbers to a substantially lower level.

Conclusions:
These sociobiological interactions might explain the stability of copy numbers better than molecular mechanisms of replication regulation alone
Melatonin Induces Follicle Maturation in Danio rerio
Most organisms modulate their reproductive activity responding to day length by the nocturnal release of melatonin by the pineal gland. This hormone is also responsible for synchronizing reproduction with specific external environment stimuli in order to optimize reproductive success
FtsK-Dependent Dimer Resolution on Multiple Chromosomes in the Pathogen Vibrio cholerae
Unlike most bacteria, Vibrio cholerae harbors two distinct, nonhomologous circular chromosomes (chromosome I and II). Many features of chromosome II are plasmid-like, which raised questions concerning its chromosomal nature. Plasmid replication and segregation are generally not coordinated with the bacterial cell cycle, further calling into question the mechanisms ensuring the synchronous management of chromosome I and II. Maintenance of circular replicons requires the resolution of dimers created by homologous recombination events. In Escherichia coli, chromosome dimers are resolved by the addition of a crossover at a specific site, dif, by two tyrosine recombinases, XerC and XerD. The process is coordinated with cell division through the activity of a DNA translocase, FtsK. Many E. coli plasmids also use XerCD for dimer resolution. However, the process is FtsK-independent. The two chromosomes of the V. cholerae N16961 strain carry divergent dimer resolution sites, dif1 and dif2. Here, we show that V. cholerae FtsK controls the addition of a crossover at dif1 and dif2 by a common pair of Xer recombinases. In addition, we show that specific DNA motifs dictate its orientation of translocation, the distribution of these motifs on chromosome I and chromosome II supporting the idea that FtsK translocation serves to bring together the resolution sites carried by a dimer at the time of cell division. Taken together, these results suggest that the same FtsK-dependent mechanism coordinates dimer resolution with cell division for each of the two V. cholerae chromosomes. Chromosome II dimer resolution thus stands as a bona fide chromosomal process
Cell Size and the Initiation of DNA Replication in Bacteria
In eukaryotes, DNA replication is coupled to the cell cycle through the actions of cyclin-dependent kinases and associated factors. In bacteria, the prevailing view, based primarily from work in Escherichia coli, is that growth-dependent accumulation of the highly conserved initiator, DnaA, triggers initiation. However, the timing of initiation is unchanged in Bacillus subtilis mutants that are ∼30% smaller than wild-type cells, indicating that achievement of a particular cell size is not obligatory for initiation. Prompted by this finding, we re-examined the link between cell size and initiation in both E. coli and B. subtilis. Although changes in DNA replication have been shown to alter both E. coli and B. subtilis cell size, the converse (the effect of cell size on DNA replication) has not been explored. Here, we report that the mechanisms responsible for coordinating DNA replication with cell size vary between these two model organisms. In contrast to B. subtilis, small E. coli mutants delayed replication initiation until they achieved the size at which wild-type cells initiate. Modest increases in DnaA alleviated the delay, supporting the view that growth-dependent accumulation of DnaA is the trigger for replication initiation in E. coli. Significantly, although small E. coli and B. subtilis cells both maintained wild-type concentration of DnaA, only the E. coli mutants failed to initiate on time. Thus, rather than the concentration, the total amount of DnaA appears to be more important for initiation timing in E. coli. The difference in behavior of the two bacteria appears to lie in the mechanisms that control the activity of DnaA
CovR-Controlled Global Regulation of Gene Expression in Streptococcus mutans
CovR/S is a two-component signal transduction system (TCS) that controls the expression of various virulence related genes in many streptococci. However, in the dental pathogen Streptococcus mutans, the response regulator CovR appears to be an orphan since the cognate sensor kinase CovS is absent. In this study, we explored the global transcriptional regulation by CovR in S. mutans. Comparison of the transcriptome profiles of the wild-type strain UA159 with its isogenic covR deleted strain IBS10 indicated that at least 128 genes (∼6.5% of the genome) were differentially regulated. Among these genes, 69 were down regulated, while 59 were up regulated in the IBS10 strain. The S. mutans CovR regulon included competence genes, virulence related genes, and genes encoded within two genomic islands (GI). Genes encoded by the GI TnSmu2 were found to be dramatically reduced in IBS10, while genes encoded by the GI TnSmu1 were up regulated in the mutant. The microarray data were further confirmed by real-time RT-PCR analyses. Furthermore, direct regulation of some of the differentially expressed genes was demonstrated by electrophoretic mobility shift assays using purified CovR protein. A proteomic study was also carried out that showed a general perturbation of protein expression in the mutant strain. Our results indicate that CovR truly plays a significant role in the regulation of several virulence related traits in this pathogenic streptococcus
Evidence-based nanoscopic and molecular framework for excipient functionality in compressed orally disintegrating tablets
The work investigates the adhesive/cohesive molecular and physical interactions together with nanoscopic features of commonly used orally disintegrating tablet (ODT) excipients microcrystalline cellulose (MCC) and D-mannitol. This helps to elucidate the underlying physico-chemical and mechanical mechanisms responsible for powder densification and optimum product functionality. Atomic force microscopy (AFM) contact mode analysis was performed to measure nano-adhesion forces and surface energies between excipient-drug particles (6-10 different particles per each pair). Moreover, surface topography images (100 nm2-10 μm2) and roughness data were acquired from AFM tapping mode. AFM data were related to ODT macro/microscopic properties obtained from SEM, FTIR, XRD, thermal analysis using DSC and TGA, disintegration testing, Heckel and tabletability profiles. The study results showed a good association between the adhesive molecular and physical forces of paired particles and the resultant densification mechanisms responsible for mechanical strength of tablets. MCC micro roughness was 3 times that of D-mannitol which explains the high hardness of MCC ODTs due to mechanical interlocking. Hydrogen bonding between MCC particles could not be established from both AFM and FTIR solid state investigation. On the contrary, D-mannitol produced fragile ODTs due to fragmentation of surface crystallites during compression attained from its weak crystal structure. Furthermore, AFM analysis has shown the presence of extensive micro fibril structures inhabiting nano pores which further supports the use of MCC as a disintegrant. Overall, excipients (and model drugs) showed mechanistic behaviour on the nano/micro scale that could be related to the functionality of materials on the macro scale. © 2014 Al-khattawi et al
Viruses exacerbating chronic pulmonary disease: the role of immune modulation
Chronic pulmonary diseases are a major cause of morbidity and mortality and their impact is expected to increase in the future. Respiratory viruses are the most common cause of acute respiratory infections and it is increasingly recognized that respiratory viruses are a major cause of acute exacerbations of chronic pulmonary diseases such as asthma, chronic obstructive pulmonary disease and cystic fibrosis. There is now increasing evidence that the host response to virus infection is dysregulated in these diseases and a better understanding of the mechanisms of abnormal immune responses has the potential to lead to the development of new therapies for virus-induced exacerbations. The aim of this article is to review the current knowledge regarding the role of viruses and immune modulation in chronic pulmonary diseases and discuss avenues for future research and therapeutic implications
Melatonin in maturation media fails to improve oocyte maturation, embryo development rates and DNA damage of bovine embryos
- …