Paleozoic structural and geodynamic evolution of eastern Tianshan (NW China): welding of the Tarim and Junggar plates

to cite the paper EPISODES Volume: 30 Issue: 3 Pages: 162-186 Published: September, 2007International audienceChinese East Tianshan is a key area for understanding the Paleozoic accretion of the southern Central Asian Orogenic Belt. A first accretion-collision stage, before the Visean, developed the Eo-Tianshan range, which exhibits north-verging structures. The geodynamic evolution included: i) Ordovician-Early Devonian southward subduction of a Central Tianshan ocean beneath a Central Tianshan arc; ii) Devonian oceanic closure and collision between Central Tianshan arc and Yili-North Tianshan block, along the Central Tianshan Suture Zone; iii) Late Devonian-earliest Carboniferous closure of a South Tianshan back-arc basin, and subsequent Central Tianshan-Tarim active margin collision along the South Tianshan Suture Zone. A second stage involved: i) Late Devonian-Carboniferous southward subduction of North Tianshan ocean beneath the Eo-Tianshan active margin (Yili-North Tianshan arc); ii) Late Carboniferous-Early Permian North Tianshan-Junggar collision. The Harlike range, unit of Mongolian Fold Belt, collided with Junggar at Mid- Carboniferous, ending a north-dipping subduction. The last CAOB oceanic suture is likely the North Tianshan Suture Zone, between Yili-North Tianshan and Junggar. During the Permian, all the already welded units suffered from a major wrenching, dextral in Tianshan, sinistral in Mongolian Fold Belt, due to opposite motion of Siberia and Tarim

Geological, geochronological and geochemical features of granulites in the Eastern Tianshan, NW China

This paper reports new results on the petrology, geochronology and geochemistry of two km-scale high-pressure granulite exposures, namely the Weiya and the Yushugou granulites, that occur in the central and southern Tianshan Paleozoic sub-belts, respectively. Petrological and geochemical results suggest that the Weiya and the Yushugou granulites are different in both the rock types and geological structures. The protolith of the Weiya granulite is basic to intermediate rocks, and that of the Yushugou granulite is basic rocks; the former is distributed as fault-bounded blocks within the Precambrian schist-gneiss, and the latter occurs as thrust slabs in the allochthonous ophiolitic mélange. Observation of deformation structures provides some evidence for two-phase ductile deformation of the Tianshan granulites, characterized by deformed garnet-pyroxene and deformed feldspar-quartz microstructures, corresponding to rheological conditions of the lower crustal level and of the middle crustal level, respectively. The deformation structures also indicate that the Weiya granulite was involved in the late stage retrograde metamorphism forming new amphibole, following a thrusting movement toward the north and ductile deformation of feldspar-quartz grains. The Yushugou granulite underwent strong ductile shearing during the Silurian–Devonian interval. Three stages of metamorphism are recorded by mineral assemblages of the Weiya granulite: M1=Pl+Qtz+Bt, M2=Cpx+Grt+Pl+Qtz+Atp±Opx, and M3=Amp+Ep+Pl+Bt+Qtz, in contrast to a two-stage metamorphic history of the Yushugou granulite: M1=Cpx+Grt+Pl±Hyp, M2=Amp+Pl+Qtz±Bt. The P–T condition estimates suggest that the Weiya granulite was formed between 910–1025 °C and 1.08–1.12 GPa, and underwent retrograde metamorphism at 650–670 °C, while the peak metamorphism of the Yushugou granulite took place between 800–870 °C and 0.88–1.13 GPa. Geochemical characteristics (major, REE and incompatible elements) of the Weiya and Yushugou granulites indicate that their protoliths were formed in a volcanic arc setting, implying that a late Precambrian active continental margin may have existed in the study area. The Sm–Nd isochron dating for the Weiya granulite suggests that the peak metamorphism occurred at 538±24 Ma, which was likely related to the ancient plate subduction. The 40Ar/39Ar dating on amphibole grains separated from the Weiya granulite yielded a plateau age of 432±1 Ma for the retrograde metamorphism, which represents an exhumation age, suggesting a significant early Paleozoic tectonothermal event

Palaeozoic tectonic evolution of the Tianshan belt, NW China

International audienceThe Chinese Tianshan belt is a major part of the southern Central Asian Orogenic Belt, extending westward to Kyrgyzstan and Kazakhstan. Its Paleozoic tectonic evolution, crucial for understanding the amalgamation of Central Asia, comprises two stages of subduction-collision. The first collisional stage built the Eo-Tianshan Mountains, before a Visean unconformity, in which all structures are verging north. It implied a southward subduction of the Central Tianshan Ocean beneath the Tarim active margin, that induced the Ordovician-Early Devonian Central Tianshan arc, to the south of which the South Tianshan back-arc basin opened. During the Late Devonian, the closure of this ocean led to a collision between Central Tianshan arc and the Kazakhstan-Yili-North Tianshan Block, and subsequently closure of the South Tianhan back-arc basin, producing two suture zones, namely the Central Tianshan and South Tianshan suture zones where ophiolitic mélanges and HP metamorphic rocks were emplaced northward. The second stage included the Late Devonian-Carboniferous southward subduction of North Tianshan Ocean beneath the Eo-Tianshan active margin, underlined by the Yili-North Tianshan arc, leading to the collision between the Kazakhstan-Yili-NTS plate and an inferred Junggar Block at Late Carboniferous-Early Permian time. The North Tianshan Suture Zone underlines likely the last oceanic closure of Central Asia Orogenic Belt; all the oceanic domains were consumed before the Middle Permian. The amalgamated units were affected by a Permian major wrenching, dextral in the Tianshan. The correlation with the Kazakh and Kyrgyz Tianshan is clarified. The Kyrgyz South Tianshan is equivalent to the whole part of Chinese Tianshan (CTS and STS) located to the south of Narat Fault and Main Tianshan Shear Zone; the so-called Middle Tianshan thins out toward the east. The South Tianshan Suture of Kyrgyzstan correlates with the Central Tianshan Suture of Chinese Tianshan. The evolution of this southern domain remains similar from east (Gangou area) to west until the Talas-Ferghana Fault, which reflects the convergence history between the Kazakhstan and Tarim blocks

Geochemical constraints on carboniferous volcanic rocks of Yili Block (Xinjiang, NW China) ; implication for the tectonic evolution of western Tianshan.

The Yili Block is important for understanding the Late Paleozoic geodynamic evolution of Central Asia. It is bounded to the north by the Northern Tianshan Carboniferous flysch and ophiolitic mélange. The center of the Block is dominated by Carboniferous sedimentary rocks with intercalation of volcanic rocks. Petrological and geochemical features of these Carboniferous volcanic rocks show that: (1) they belong to the calc-alkaline series, (2) they display prominent Nb–Ta negative anomalies consistent with subduction-related magmas, and (3) HFSE-based discriminations place these volcanic rocks in the field of continental arcs. The depositional evolution of the sedimentary series shows evidence for Carboniferous sedimentation in a basin instead of rifting as previously proposed. All these evidences, together with the occurrence of contemporaneous turbidites and ophiolitic mélange along the northern boundary of the Yili Block, allow us to infer that the northern border of the Yili Block was a continental active margin during the Carboniferous. The Late Carboniferous southward subduction that finally closed the Late Devonian to Early Carboniferous North Tianshan oceanic basin was followed by Permian–Mesozoic polyphase transcurrent faulting

Late Paleozoic tectonic and magmatic evolution of the Chinese West Tianshan

In Xinjiang Province of NW China, the Tianshan Belt belongs to the Late Paleozoic Variscan orogens that shaped up the Eurasian continent. Most of geologists drew to a conclusion that the Tianshan Belt was built during Paleozoic times through oceanic subduction, accretion and collision between the main Precambrian cratons such as Tarim, Junggar and Kazakhstan and some intervening microcontinents such as the Yili Block. However, there are still some controversies on the geodynamics of Paleozoic Tianshan, especially the West Tianshan (WTS), which was less studied than the East Tianshan. In particular, the tectonic significance in terms of heat transfer and crustal rheology of the huge magmatic rocks that develop in WTS is rarely taken into account in the lithosphere-scale evolution models

Tectonic evolution of the northern part of Western Tianshan (Xinjiang, NW China).

The Yili Block is important for understanding the Late Paleozoic geodynamic evolution of Central Asia. It is bounded to the north by the Northern Tianshan Carboniferous flysch and ophiolitic mélange. The center of the Block is dominated by Carboniferous sedimentary rocks with intercalation of volcanic rocks. Petrological and geochemical features of these Carboniferous volcanic rocks show that: (1) they belong to the calc-alkaline series, (2) they display prominent Nb-Ta negative anomalies consistent with subduction-related magmas, and (3) HFSE-based discriminations place these volcanic rocks in the field of continental arcs. The depositional evolution of the sedimentary series shows evidence for Carboniferous sedimentation in a basin instead of rifting as previously proposed. All these evidences, together with the occurrence of contemporaneous turbidites and ophiolitic mélange along the northern boundary of the Yili Block, allow us to infer that the northern border of the Yili Block was a continental active margin during the Carboniferous. The Late Carboniferous southward subduction that finally closed the Late Devonian to Early Carboniferous North Tianshan oceanic basin was followed by Permian-Mesozoic polyphase transcurrent faulting

Tuneable Capacitor based on dual picks profile of the sacrificial layer

In this paper, we present a novel dual gap tuneable capacitor process based on the profile of the sacrificial layer. This profile involves a tri-layer photo-resist process with only one mask level. This realization is based on a special profile of the sacrificial layer designed by two picks. The mechanism of the sacrificial layer realisation is dependent on resist thickness, resist formulation (viscosity, type of polymer and/or solvent, additives...), design of the patterned layer (size or width) and the conditions under which this layer is prepared: thermal treatment, etch back processes... In this communication we demonstrate influence of the later parameters and discuss how a dual pick profile was achieved.Comment: Submitted on behalf of EDA Publishing Association (http://irevues.inist.fr/EDA-Publishing

Timing of initiation of extension in the Tianshan, based on structural, geochemical and geochronological analyses of bimodal volcanism and olistostrome in the Bogda Shan (NW China)

International audienceThis paper describes an olistostrome formation and accompanied bimodal volcanic rocks occurring in the Baiyanggou area, south of Bogda Shan. The main lithotectonic units consist of olistostrome, volcanic rocks and turbidite. The olistostrome is tectonically underlain by Upper Carboniferous limestone and sandstone along a NEE-trending detachment fault. Paleo-growth fault is locally observed. The olistostrome unit includes plenty of blocks of limestone, sandstone, rhyolite and volcaniclastic rocks, and a matrix of graywacke. Limestone blocks are dated as Pennsylvanian-Bashkirian in age by the coral and brachiopod fossils that are extensively recognized in the Upper Carboniferous strata. The volcanic unit consists of pillowed and massive basalt and rhyolite, the latter occur as an 8- to 10-meter-thick layer above the olistostrome unit. The turbidite unit is mainly composed of chert, siliceous mudstone and sandstone, within which the Bouma sequence can be locally recognized. Meter-wide gabbro and diabase dykes intrude these three units. Geochemically, rhyolites are characterized by high ACNK value of >1.1, depletion of Ba, Nb and Sm, and enrichment in Rb, Th and Zr. Basaltic rocks are rich in K2O, they show a LREE-enriched pattern and depletion in Ba, Nb and Zr, and enrichment in Ti, Ce and Hf, similar to continental rift-type tholeiite series. A gabbro porphyrite intruding the olistostrome was dated at 288 ± 3 Ma by a sensitive high-resolution ion microprobe (SHRIMP) zircon U-Pb method, and a rhyolite at 297 ± 2 Ma by a laser ablation inductively coupled plasma mass spectrometer (LA-ICPMS) zircon U-Pb method. The Baiyanggou olistostrome and accompanying bimodal volcanic series are linked to an extensional setting that developed in the south of the Bogda Shan. Several lines of evidence, e.g. occurrence of large-scale strike-slip shear zones, large number of mantle-derived magmatic rocks and available geochronological data, demonstrate a significant geodynamic change from convergence to extension in the Chinese Tianshan belt, even in the whole Central Asian Orogenic Belt. The extension in the Chinese Tianshan belt is initiated at ca. 300 Ma, i.e. around Carboniferous-Permian boundary times, and the peak period of intra-plate magmatism occurred in the interval of 300-250 Ma

L'évolution géodynamique de la chaîne paléozoïque du Tianshan

La chaîne du Tianshan s'étend sur plus de 3000 km en Asie centrale, elle sépare le Tarim au Sud du Juggar et du Kazakhstan au Nord (Fig. 1a). La collision indienne est responsable du haut-relief actuel, mais l'architecture de la chaîne est due à plusieurs événements d'âge Paléozoïque. Classiquement, la chaîne du Tianshan est divisée en Tianshan Nord, Tianshan Central, Tianshan Sud et Bloc de Yili (Fig. 1b). Ce dernier est souvent considéré comme l'extension occidentale du Tianshan Central, mais nos données structurales, géochimiques et paléomagnétiques suggèrent que ces domaines et leurs limites doivent être redéfinis

Paleozoic tectonics of the southern Chinese Tianshan: Insights from structural, chronological and geochemical studies of the Heiyingshan ophiolitic mélange (NW China)

International audienceIn the southern Chinese Tianshan, the southernmost part of the Central Asian Orogenic Belt (CAOB), widespread ophiolitic mélanges form distinct tectonic units that are crucial for understanding the formation of the CAOB. However, the timing of tectonic events and subduction polarity are still in controversy. In order to better understand these geological problems, a comprehensive study was conducted on the Heiyingshan ophiolitic mélange in the SW Chinese Tianshan. Detailed structural analysis reveals that the ophiolitic mélange is tectonically underlain by sheared and weakly metamorphosed pre-Middle Devonian rocks, and unconformably overlain by non-metamorphic and undeformed lower Carboniferous (Serpukhovian) to Permian strata. The igneous assemblage of the mélange comprises OIB-like alkali basalt and andesite, N-MORB-like tholeiitic basalt, sheeted diabase dikes, cumulate gabbro and peridotite. Mafic rocks display supra-subduction signatures, and some bear evidence of contamination with the continental crust, suggesting a continental marginal (back-arc) basin setting. Zircons of a gabbro were dated at 392 ± 5 Ma by the U-Pb LA-ICP-MS method. Famennian-Visean radiolarian microfossils were found in the siliceous matrix of the ophiolitic mélange. Mylonitic phyllite which displays northward-directed kinematic evidence yielded muscovite 40Ar/39Ar plateau ages of 359 ± 2 Ma and 356 ± 2 Ma. These new data, combined with previously published results, suggest that the mafic protoliths originally formed in a back-arc basin in the Chinese southern Tianshan during the late Silurian to Middle Devonian and were subsequently incorporated into the ophiolitic mélange and thrust northward during the Late Devonian to early Carboniferous. Opening of the back-arc basin was probably induced by south-dipping subduction of the Paleo-Tianshan Ocean in the early Paleozoic, and the Central Tianshan block was rifted away from the Tarim block. Closure of the back-arc basin in the early Carboniferous formed the South Tianshan Suture Zone and re-amalgamated the two blocks