13 research outputs found
Kinetic and equilibrium study for the sorption of Pb(II) ions from aqueous phase by water hyacinth (Eichhornia crassipes)
This paper reports the kinetic and equilibrium studies of Eichhornia crassipes root biomass as a biosorbent for Pb(II) ions from aqueous system. Batch adsorption studies were carried out to examine the influence of various parameters such as the pH, contact time, adsorbent dose, initial metal ion concentration, temperature and agitation speed on the metal ion uptake. Uptake of Pb(II) ions on the E. crassipes roots showed a pH-dependent profile. The maximum metal uptake values were 164 μg/mL. Langmuir model fitted the experimental sorption equilibrium data with a good fit (R2 > 0.99). The biosorption kinetics was described by the pseudo-second-order model (R2 > 0.99). KEY WORDS: Water hyacinth, Biosorption, Kinetics, Water treatment, Pb(II) removal Bull. Chem. Soc. Ethiop. 2012, 26(2), 181-193.DOI: http://dx.doi.org/10.4314/bcse.v26i2.
Fluoride adsorption onto an acid treated lateritic mineral from Kenya: Equilibrium studies
Adsorption of fluoride (F) ions from water using acid treated lateritic mineral (LM-1) from Kenya was studied by batch experiments. The effect of acid-treatment of adsorbent and change in temperature, mass of LM-1, pH and selected competing ions was evaluated. The adsorption process was strongly influenced by temperature, pH and adsorbent dosage. The percentage F removal increased the presence of the nitrate and the chlorate ions but decreased the presence of sulphates, chloride and phosphate ions. Adsorption isotherms were classified according to Giles’ classification and the adsorption data validated using Langmuir and Freundlich isotherms. The data correlated to both the Langmuir and Freundlich isotherms although the data fit to the Freundlich model was somehow better. This showed that F adsorption onto LM-1 followed a mixed adsorption mechanism in which physisorption reactions involving intra-particle diffusion of F into mesoporous sites in LM-1 became increasingly important at higher concentrations and temperatures whereas ion-exchange mechanism involving surface OH- appear to dominate at low surface coverage in more alkaline conditions. With maximum adsorption capacity of 10.5 mg/g, LM-1 could be used to remove F water.Key words: Equilibrium analysis, fluoride adsorption, Langmuir and Freundlich isotherms, Lateritic mineral adsorbent, low-cost adsorbents
Equilibrium Studies of Fluoride Adsorption onto a Ferric Poly 12mineral from Kenya
African countries along the Great Rift Valley are among areas of the
world where excess fluoride in water sources is a major public health
problem. In this work, the removal of fluoride (F) from water solutions
using a ferric poly-mineral (FPM) from Kenya was therefore studied
using batch adsorption experiments. The effect of change in solution
pH, temperature, initial concentration of F, mass of FPM, contact time
and presence of various competing ions on F adsorption onto FPM was
evaluated. Adsorption isotherms were then applied to the adsorption
data to characterize and establish the adsorption capacity of the
mineral. The adsorption of F onto FPM was found to be a fast process
and, at 1000 mg/L initial F concentration at pH 3.32 and 293 K and
using 0.2 g/mL adsorbent dosage, over 90% F removal from solution could
be achieved in 30 min. Based on Giles system of classification of
adsorption isotherms, F adsorption isotherm conformed to L4
Langmuir-type isotherms. This indicated that FPM is composed of a
heterogeneous surface consisting of sites which, during adsorption,
filled-up with F ions in succession. The adsorption data also
correlated to Langmuir and Freundlich models indicating that F
adsorption onto FPM was a mixed process involving chemisorption onto
surface sites followed by gradual intra-particle penetration of F into
mesoporous structure of the mineral. High mean Langmuir adsorption
capacity of 10.8 mg/g, indicate that the mineral could be of use as an
inexpensive substrate for the removal of F from aqueous streams
Characteristics of potential gasifier fuels in selected regions of the Lake Victoria Basin
All countries in the Lake Victoria Basin depend mostly on hydroelectric power for the provision of energy. Gasification technology has a high potential for reducing biomass energy consumption whilst increasing access to modern energy services. The key aspect for the failure of gasification operations in the Lake Victoria Basin is inadequate adaptation of gasification equipment to fuel characteristics, lack of fuel specification and inappropriate material choice. We therefore investigated the thermo-chemical characterisation of six biomass fuels, namely Pinus caribaea, Calitris robusta, Cupressus lusitanica, Eucalyptus grandis, Pinus patula and sugarcane bagasse from selected regions of the Lake Victoria Basin. Ultimate analysis was done using a Flash 2000 elemental analyser. Moisture content, ash content and volatile matter were determined in oven and muffle furnaces while heating values were determined using a Gallenkamp calorimeter. The mean percentage levels obtained indicate that all six biomass fuels had a mean range for nitrogen of 0.07±0
Preparation and Characterization of Pd Modified TiO 2
Abstract: TiO2 fiberswere prepared through electrospinning of poly methyl methacrylate (PMMA)and titaniumisopropoxide (TIP) solution followed by calcination of fibers in air at 500∘C. Cetyltrimethylammonium bromide (CTAB) protected palladium nanoparticles (Pd NPs) prepared through reduction method were successfully adsorbed on the TiO2 nanofibers (NF). Combined studies of X-ray diffraction (XRD), scanning electron microscope (SEM), and transmission electron microscope (TEM) indicated that the synthesized Pd/TiO2 had anatase. BET indicated that the synthesized TiO2 and Pd/TiO2 had a surface area of 53.4 and 43.4m2/g, respectively.The activity and selectivity of 1mol% Pd/TiO2 in the Heck reaction have been investigated towards theMizoroki-Heck carbon–carbon cross-coupling of bromobenzene (ArBr) and styrene. Temperature, time, solvent, and base were optimized and catalyst was recycled thrice. 1H NMR and 13C NMR indicated that stilbene, a known compound from literature, was obtained in various Heck reactions at temperatures between 100∘C and 140∘C but the recyclability was limited due to some palladium leaching and catalyst poisoning which probably arose from some residual carbon from the polymer. The catalyst was found to be highly active under air atmosphere with reaction temperatures up to 140∘C. Optimized reaction condition resulted in 89.7% conversions with a TON of 1993.4 and TOF value of 332.2 hr−1
Kinetic and equilibrium study for the sorption of Pb(II) ions from aqueous phase by water hyacinth (<i>Eichhornia crassipes</i>)
This paper reports the kinetic and equilibrium studies of Eichhornia crassipes root biomass as a biosorbent for Pb(II) ions from aqueous system. Batch adsorption studies were carried out to examine the influence of various parameters such as the pH, contact time, adsorbent dose, initial metal ion concentration, temperature and agitation speed on the metal ion uptake. Uptake of Pb(II) ions on the E. crassipes roots showed a pH-dependent profile. The maximum metal uptake values were 164 μg/mL. Langmuir model fitted the experimental sorption equilibrium data with a good fit (R2 › 0.99). The biosorption kinetics was described by the pseudo-second-order model (R2 › 0.99).DOI: http://dx.doi.org/10.4314/bcse.v26i2.
Equilibrium Studies of Fluoride Adsorption onto a Ferric Poly−mineral from Kenya
African countries along the Great Rift Valley are among areas of the
world where excess fluoride in water sources is a major public health
problem. In this work, the removal of fluoride (F) from water solutions
using a ferric poly-mineral (FPM) from Kenya was therefore studied
using batch adsorption experiments. The effect of change in solution
pH, temperature, initial concentration of F, mass of FPM, contact time
and presence of various competing ions on F adsorption onto FPM was
evaluated. Adsorption isotherms were then applied to the adsorption
data to characterize and establish the adsorption capacity of the
mineral. The adsorption of F onto FPM was found to be a fast process
and, at 1000 mg/L initial F concentration at pH 3.32 and 293 K and
using 0.2 g/mL adsorbent dosage, over 90% F removal from solution could
be achieved in 30 min. Based on Giles system of classification of
adsorption isotherms, F adsorption isotherm conformed to L4
Langmuir-type isotherms. This indicated that FPM is composed of a
heterogeneous surface consisting of sites which, during adsorption,
filled-up with F ions in succession. The adsorption data also
correlated to Langmuir and Freundlich models indicating that F
adsorption onto FPM was a mixed process involving chemisorption onto
surface sites followed by gradual intra-particle penetration of F into
mesoporous structure of the mineral. High mean Langmuir adsorption
capacity of 10.8 mg/g, indicate that the mineral could be of use as an
inexpensive substrate for the removal of F from aqueous streams
Removal of Cadmium(II) Ions from Water by Adsorption using Water Hyacinth (Eichhornia crassipes) Biomass
The kinetics and equilibrium binding of Cd(II) ions onto raw water hyacinth (Eichhornia crassipes) biomass (RBH) were investigated with the view to utilize it as a low-cost biosorbent for removal of toxic metal ions from water. The biosorption was analyzed through batch experiments with respect to the effect of contact time, agitation speed, biosorbent dosage, solution pH, Cd(II) concentration, and the presence of other metal ions. Cadmium adsorption onto Eichhornia crassipes biomass was pH- and temperature-dependent, and complete Cd(II) removal from solution was achieved at all Cd(II) concentrations up to 10 mg/L. The biosorption equilibrium was described by Langmuir and Freundlich isotherms, and the RBH Cd(II) uptake capacity was 104 mg/g. The biosorption process followed the pseudo-second-order model (R2 0.99). The root biomass of water hyacinth had one of the highest Cd(II) sequestration efficiencies when compared to other biosorbents that have been used to remove Cd(II) from water