Analysis and geological interpretation of gravity data from GEOS-3 altimeter

A number of detailed gravimetric geoids of portions of the world's oceans from marine gravity measurements were constructed. The geoids were constructed by computing 1 x 1 deg or 10 x 10 deg averages of free-air anomaly data and subtracting these values from currently used satellite derived Earth models. The resulting difference gravity anomalies are then integrated over a sphere using a simplified form of Stoke's equation to obtain a difference geoid. This difference geoid is added to the satellite derived model to obtain a 1 x 1 deg or 10 x 10 deg total gravimetric geoid. The geoid undulations are studied by comparison of the altimeter measurements with the morphology of the ocean floor. Utilizing a combination of altimetry data, gravity and seismic reflection data, geophysical models of the earth can be constructed

Scattered light in the IUE spectra of Epsilon Aurigae

As a result of this work it was found that light scattered from the longer wavelengths constitutes a small but non-negligible, wavelength and time dependent fraction of the measured flux in the far UV. The reality of the UV excess has not been unambigiously ruled out. However, it is noted that there are still uncertainties in the assumed scattering profile. New measurements of the scattering properties of the cross disperser grating are planned in order to verify the results of Mount and Fastie and extend the wavelength coverage into the far wings of the profile. The results of these measurements will no doubt reduce some of these uncertainties. For the present, it is felt that the BCH approach is a significant improvement over the methods heretofore available for the treatment of scattered light in IUE spectra

Improving the Functional Control of Aged Ferroelectrics using Insights from Atomistic Modelling

We provide a fundamental insight into the microscopic mechanisms of the ageing processes. Using large scale molecular dynamics simulations of the prototypical ferroelectric material PbTiO3, we demonstrate that the experimentally observed ageing phenomena can be reproduced from intrinsic interactions of defect-dipoles related to dopant-vacancy associates, even in the absence of extrinsic effects. We show that variation of the dopant concentration modifies the material's hysteretic response. We identify a universal method to reduce loss and tune the electromechanical properties of inexpensive ceramics for efficient technologies.Comment: 6 pages, 3 figure

Realistic Expanding Source Model for Invariant One-Particle Multiplicity Distributions and Two-Particle Correlations in Relativistic Heavy-Ion Collisions

We present a realistic expanding source model with nine parameters that are necessary and sufficient to describe the main physics occuring during hydrodynamical freezeout of the excited hadronic matter produced in relativistic heavy-ion collisions. As a first test of the model, we compare it to data from central Si + Au collisions at p_lab/A = 14.6 GeV/c measured in experiment E-802 at the AGS. An overall chi-square per degree of freedom of 1.055 is achieved for a fit to 1416 data points involving invariant pi^+, pi^-, K^+, and K^- one-particle multiplicity distributions and pi^+ and K^+ two-particle correlations. The 99-percent-confidence region of parameter space is identified, leading to one-dimensional error estimates on the nine fitted parameters and other calculated physical quantities. Three of the most important results are the freezeout temperature, longitudinal proper time, and baryon density along the symmetry axis. For these we find values of 92.9 +/- 4.4 MeV, 8.2 +/- 2.2 fm/c, and 0.0222 + 0.0096 / - 0.0069 fm^-3, respectively.Comment: 37 pages and 12 figures. RevTeX 3.0. Submitted to Physical Review C. Complete preprint, including device-independent (dvi), PostScript, and LaTeX versions of the text, plus PostScript files of all figures, are available at http://t2.lanl.gov/publications/publications.html or at ftp://t2.lanl.gov/publications/res

Resistive Wall Tearing Mode Disruptions

This paper deals with resistive wall tearing mode (RWTM) disruptions. RWTMs are closely related to resistive wall modes (RWMs). The nonlinear behavior of these modes is strongly dependent on the resistive wall outside the plasma. A conducting wall is highly mitigating for RWTM disruptions. The consequence for ITER, which has a highly conducting wall, is that the thermal quench (TQ) time could be much longer than previously conjectured. Active feedback stabilization is another possible way to mitigate or prevent RWTM disruptions. Simulations of disruptions are reviewed for DIII-D and MST. MST has a longer resistive wall time than ITER, and disruptions are not observed experimentally when MST is operated as a standard tokamak. Simulations indicate that the RWTM disruption time scale is longer than the experimental shot time. In general, edge cooling by tearing mode island overlap or by impurity radiation causes contraction of the current profile, which destabilizes RWTMs. The equilibria studied here have a q = 2 rational surface close to the edge of the plasma, and low edge current density. A sequence of low edge current model equilibria hasmajor disruptions only for a resistive, not ideal, wall, and approximately edge q < 3. This is consistent with typical regimes of tokamak disruption avoidance, suggesting that typical tokamak disruptions could be RWTMs

Kinetic Signatures and Intermittent Turbulence in the Solar Wind Plasma

A connection between kinetic processes and intermittent turbulence is observed in the solar wind plasma using measurements from the Wind spacecraft at 1 AU. In particular, kinetic effects such as temperature anisotropy and plasma heating are concentrated near coherent structures, such as current sheets, which are non-uniformly distributed in space. Furthermore, these coherent structures are preferentially found in plasma unstable to the mirror and firehose instabilities. The inhomogeneous heating in these regions, which is present in both the magnetic field parallel and perpendicular temperature components, results in protons at least 3-4 times hotter than under typical stable plasma conditions. These results offer a new understanding of kinetic processes in a turbulent regime, where linear Vlasov theory is not sufficient to explain the inhomogeneous plasma dynamics operating near non-Gaussian structures.Comment: 4 pages, 3 figures, submitted to Physical Review Letter

Robust multi-fidelity design of a micro re-entry unmanned space vehicle

This article addresses the preliminary robust design of a small-scale re-entry unmanned space vehicle by means of a hybrid optimization technique. The approach, developed in this article, closely couples an evolutionary multi-objective algorithm with a direct transcription method for optimal control problems. The evolutionary part handles the shape parameters of the vehicle and the uncertain objective functions, while the direct transcription method generates an optimal control profile for the re-entry trajectory. Uncertainties on the aerodynamic forces and characteristics of the thermal protection material are incorporated into the vehicle model, and a Monte-Carlo sampling procedure is used to compute relevant statistical characteristics of the maximum heat flux and internal temperature. Then, the hybrid algorithm searches for geometries that minimize the mean value of the maximum heat flux, the mean value of the maximum internal temperature, and the weighted sum of their variance: the evolutionary part handles the shape parameters of the vehicle and the uncertain functions, while the direct transcription method generates the optimal control profile for the re-entry trajectory of each individual of the population. During the optimization process, artificial neural networks are utilized to approximate the aerodynamic forces required by the optimal control solver. The artificial neural networks are trained and updated by means of a multi-fidelity approach: initially a low-fidelity analytical model, fitted on a waverider type of vehicle, is used to train the neural networks, and through the evolution a mix of analytical and computational fluid dynamic, high-fidelity computations are used to update it. The data obtained by the high-fidelity model progressively become the main source of updates for the neural networks till, near the end of the optimization process, the influence of the data obtained by the analytical model is practically nullified. On the basis of preliminary results, the adopted technique is able to predict achievable performance of the small spacecraft and the requirements in terms of thermal protection materials

High resolution charge-exchange spectroscopic measurements of aluminum impurity ions in a high temperature plasma

Charge-exchange recombination spectroscopy, which is generally used to measure low-Z impurities in fusion devices, has been used for measuring Al+11 and Al+13 impurities in the Madison Symmetric Torus reversed field pinch. To obtain the impurity ion temperature, the experimental emission spectrum is fitted with a model which includes fine structure in the atomic transition. Densities of these two ionization states, calculated from charge-exchange emission brightness, are used in combination with a collisional radiative model to estimate the abundance of all other charge states of aluminum in the plasma and the contribution of aluminum to the effective ionic charge of the plasma

Cardiovascular Responses to the Cold Pressor Test Are Not Modified in Healthy Adults with a History of Concussion

Click the PDF icon to download the abstract

Ion acceleration processes at reforming collisionless shocks

The identification of pre-acceleration mechanisms for cosmic ray ions in supernova remnant shocks is an important problem in astrophysics. Recent particle-in-cell (PIC) shock simulations have shown that inclusion of the full electron kinetics yields non-time-stationary solutions, in contrast to previous hybrid (kinetic ions, fluid electrons) simulations. Here, by running a PIC code at high phase space resolution, ion acceleration mechanisms associated with the time dependence of a supercritical collisionless perpendicular shock are examined. In particular the components of $\int \mathbf{F} \cdot \mathbf{v} dt$ are analysed along trajectories for ions that reach both high and low energies. Selection mechanisms for the ions that reach high energies are also examined. In contrast to quasi-stationary shock solutions, the suprathermal protons are selected from the background population on the basis of the time at which they arrive at the shock, and thus are generated in bursts.Comment: 12 Pages, 7 Figures, To be published in Phys. Plasma